displaying posts 1 to 25 of 39

Pages (2): [1] 2

Author Subject: Anyone want to buy a track car?
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #1
So, I've been toying with the idea of selling my car, due to personal circumstances there's just no chance I'll be able to drive it for a couple of years or so, and I'd rather not see it rust into nothingness in my garage.

Let's get one thing clear upfront though right - I will *not* be breaking it; I don't have the time nor the inclination, I'd just keep it. So you can save your "I'll take the valve caps if you decide to break", it's not happening.

The problem I have is that I'd want a realistic price, so I'd never give it away for a silly amount. However (having had chats with a couple of people on here, you know who you are) you never know who's after what, so thought I might as well ask. I've added up the rough price for if I got going rate for all the parts second-hand, and it comes in at about £3.5k - that's assuming I sold every major part which I'm aware is unlikely to happen, but that's a guide. I've not included the shell and engine in the price, they'd basically get thrown in for free with the parts. Buy car parts, get a free car?

Anyone out there looking to build themselves a 306 for track who'd like to save themselves a boatload of time and effort by buying the lot up all at once? At the moment it drives and is an already awesome car, no need to have it trailered anywhere; come April the MOT and tax are up and it'll become altogether harder to shift around. At the moment it's an awesome track machine which needs no work whatsoever. Could possibly benefit from a new steering pump (which I have), but that's only ever an issue at startup, so I've not bothered yet.

The work I've done to it is all in my project thread and to reiterate - don't bother offering me £1k for it, as I won't sell it for that. I can post up the list of bits if anyone's genuinely interested, thought I'd test the water first though.

Finally, apologies for what is essentially a "gathering interest" thread, which I loathe. I hope you can appreciate this is a little more than the standard "GI: Selling my wiper blades" bullcrap that all too often blights the General section.

Question mark.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 13:44
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #2
owain wrote:
don't bother offering me £1k for it, as I won't sell it for that.


£1005?

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 2nd Oct 2012 at 14:53
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #3
Also not £1005.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 14:58
roland rat

Yeeeah Rat fans!

Location: Swansea

Registered: 29 Nov 2006

Posts: 22,284

Status: Offline

Post #4
Will you break it as id love some bits from you? Whistle

As discussed mate set a price and if the clowns on here dont want to pay that then f**k 'em its there loss Wink
Posted 2nd Oct 2012 at 16:04
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #5
roland rat wrote:
set a price and if the clowns on here dont want to pay that then f**k 'em its there loss


That's more or less what I was trying to say politely LOL

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 16:06
silky

Seasoned Pro

Location: Chelmsford, Essex

Registered: 29 Dec 2002

Posts: 3,470

Status: Offline

Post #6
Owain, for those that haven't read your 30 page epic build thread, could you put a rough spec up on here. Save's people asking silly questions Wink
Posted 2nd Oct 2012 at 16:19
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline

Post #7
I was going to say the same but then started reading the thread.
Better than a smutty fifty shades of whatever booker any day of the week.

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 2nd Oct 2012 at 16:24
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #8
Listy list list:



On top of that there's obviously the car itself; shell has been completely stripped and the sunroof has been welded up, plenty of room for a crash helmet. The engine has done about 160k but has had a complete rebuild, I have all the receipts for that.

I also have a tonne of spares - various bolts, droplinks and such.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 16:37
thugpuggin

Seasoned Pro

Location: Bristol

Registered: 10 Apr 2004

Posts: 26,784

Status: Offline

Post #9
You deserve a -1 as this is solely a ploy to get people to read your track car thread. Thumbs down

________________________________________

Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.

Joint Kent Leader

Posted 2nd Oct 2012 at 16:56
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #10
thugpuggin wrote:
You deserve a -1 as this is solely a ploy to get people to read your track car thread. Thumbs down


I don't hate anyone enough to make them read through thirty pages of that! LOL

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 16:57
simonjames

Seasoned Pro

Location: Whitland S.Wales

Registered: 23 Nov 2004

Posts: 6,219

Status: Offline

Post #11
I too am in the same position mate, i cant always get in the car over the cage (knee doesnt always bend fully) plus always busy at work/home i dont get chance to use it, would rather see someone else have the use but as i've spent a small fortune i dont want to give it away and really dont want to pull it apart

________________________________________

All South Wales Members Click Here
Team Supercharged Black RALLYE ™ (Click Here for Build Project)
MY EBAY ITEMS

07943066306
Posted 2nd Oct 2012 at 17:53
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #12
Mate, keep it until you can afford a bionic leg. Problem solved.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 18:26
rikky 🦔

Location: cheshire

Registered: 28 Feb 2004

Posts: 26,796

Status: Offline

Post #13
owain wrote:
Mate, keep it until you can afford a bionic leg. Problem solved.


Laugh my ass off

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]
Posted 2nd Oct 2012 at 18:28
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #14
s**t, I've been short changed by the rest of you barstewards on the lower braces! Angry

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 2nd Oct 2012 at 18:31
simonjames

Seasoned Pro

Location: Whitland S.Wales

Registered: 23 Nov 2004

Posts: 6,219

Status: Offline

Post #15
owain wrote:
Mate, keep it until you can afford a bionic leg. Problem solved.



LOL

________________________________________

All South Wales Members Click Here
Team Supercharged Black RALLYE ™ (Click Here for Build Project)
MY EBAY ITEMS

07943066306
Posted 2nd Oct 2012 at 18:35
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #16
phillipm wrote:
s**t, I've been short changed by the rest of you barstewards on the lower braces! Angry


You're just p**sed that Oween is a considerably better salesman than yaow!

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 2nd Oct 2012 at 18:49
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #17
daveyboy wrote:
You're just p**sed that Oween is a considerably better salesman than yaow!


Clearly not, don't see anyone buying my car.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 19:17
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #18
I'll take the dustcaps if you decide to break it Big grin

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 2nd Oct 2012 at 19:20
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #19
daveyboy wrote:
I'll take the dustcaps if you decide to break it Big grin


Fair enough Dave, they're all yours Thumbs up

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 2nd Oct 2012 at 19:22
lurch86

Senior User

Location: Herne Bay, Kent

Registered: 22 Nov 2010

Posts: 505

Status: Offline

Post #20
If you do decide to break it your going to make me very very poor!

________________________________________

Wanted list... (P.m me if you have any)
Rollcage.
Strut Braces.

Lydden Hill 31/10/2015 Last Track day
1st time at Snetterton on the Bike! 22/08/2017
Posted 2nd Oct 2012 at 20:39
prism7guy

Seasoned Pro

Location: DoncastAAAAARGH

Registered: 13 Jan 2008

Posts: 4,640

Status: Offline

Post #21
Don't sell it Owen, you never know how your life will be a year down the line.
I might win the euromillions and i may just employ you to follow me round and make obnoxious remarks to everyone i meet. Dunno

________________________________________

Goldie the track car.
Posted 2nd Oct 2012 at 21:23
woody.

Senior User

Location: London

Registered: 18 May 2009

Posts: 799

Status: Offline

Post #22
Really enjoyed reading your project thread, makes a large task seem less complex and gives you confidence to do it yourself instead of paying a garage to do the job! Shame your selling up but GLWTS, and agreed, someone will get a great little track car Smile
Posted 2nd Oct 2012 at 21:51
oecken

Seasoned Pro

Location: Mt Cook, New Zealand

Registered: 17 Feb 2009

Posts: 4,751

Status: Offline

Post #23
No thanks.....

________________________________________

Sad Ex-Black 6 Ninja - Speed has never killed anyone, suddenly becoming stationary... That's what gets you.
Posted 2nd Oct 2012 at 23:04
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #24
Rent it out, earn some money from it.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 2nd Oct 2012 at 23:12
owain

Seasoned Pro

Location: Essex

Registered: 20 May 2009

Posts: 9,185

Status: Offline

Post #25
prism7guy wrote:
i may just employ you to follow me round and make obnoxious remarks to everyone i meet.


Tell me more, is there some kind of pension plan?

woody. wrote:
GLWTS, and agreed, someone will get a great little track car


Or more likely no-one will, and I'll keep it LOL

oecken wrote:
No thanks.....


Yeah sorry Mat, forgot it's not nearly f**k ugly enough for you to own it Thumbs up

daveyboy wrote:
Rent it out, earn some money from it.


Thought about that, until I remembered how I've driven every rental car I've ever had.

________________________________________

Membership expiring soon, get in contact on our new little forum project.
Posted 3rd Oct 2012 at 07:48

Pages (2): [1] 2

All times are GMT. The time is now 12:22

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.