Fitment question from me, I know you may think it's having a pop but it really isn;t and I don;t have a phone number to call you on.

without reading the complete thread again, these are the Exact pipes.

The rears are too long, on both sides so have you fitted any of these yourself to a GTI6? as they need to be shorter by around 40mm compared to the std pipes removed (OE Pug ones)

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,

How much would a full kit for a GTI6, with covers and stainless fittings set me back?
Thanks
Matt

Lengths are same as standerd hoses, and same lengths as detailed in a number of replacment parts catalogues.

next order goes in on monday

ignore the above comments, the lines fit fine, look at how many sets have being sold and how many people have complained about the rear lines??

erm ZERO!!!

have you being smokin the crack pipe?

Customer service?
Are you a customer? No your not

have i or exact had any complaints about the length of the rear hoses?
No we havent.

Have i answerd your question about lengthes?
In a roundabout way yes i have.
They are the same length as can be found detailed on service box and any number of replacment brake line suppliers website and parts books.

Is there any need for me to pm you?
No there isnt.

SO STOP SPAMMING THE THREAD

do exact make hoses for after market caliper suppliers and braided line suppliers, who re brand and pack them then dramaticly increase the price?
Yes they do.

Its not something i do alot of but can supply them if requird.

Nitrle lined with a stainless over braid, just supplied stan some.

If some one has had lines from me then they can contact me and raise the issue, as this would be what most people do.

And records are kept of who has had what so i can check,

yes it is neccasary for them to contact me with the lengthes you say the lines are, and from what part of the hose you have measurd.




But as i have said countless times they are made to the same lengths as peugeot state on service box and that other companies state in there product descriptions.


This all sounds like sour grapes to me as some one has had lines from me and askd you to fit them, thus you missing out on a sale.


In the 5yrs of selling these lines myself i have NEVER had any one complain about the length of the rears, and in that time the design has changd.
And exact have being selling them much longer than that, look back at this thread, go on read all the pages and you find me a single person complaing the rear lines are too long?
There you go you wont, but what you will find is alot of people commenting on the quality, alot of people who when they change car come back for more lines be it for a 306 or what they have changd to.


These aint some lines knockd up by some one in an old shed, these are made by a company who specialise in them.
Who make thousands of lines a week and distrubute them worldwide under a multi tude of names.

I even have garages off here (more than one and not just peugeot)buying
multiple sets from me over periods of time,

NOW GET OFF MY THREAD!

If I were you Swampy I would just give him the measurement the pipe is supposed to be so he can check if it's the same and that could be an end to it.
You digging your heels in and refusing to accept that there MAY have been a mistake HOWEVER UNLIKELY is just making you look bad.
Put it another way, if I had just stumbled accross this thread and saw your response to a perfectly reasonable query I would'nt hesitate in sending my business elsewhere.

Think about this:

The rear brake pipe has to be long enough to cope with full droop of the rear trailing arm. As it runs over the top of the beam pivot when the arms drop the length of the hose effectively has to increase as the two fittings move apart. If you lower a 6 (Something a few of Miles customers have done I suspect, then you will reduce the distance between the fittings. My Goodridge hoses had a fair ammount of slack in them with the car on the ground (Lowered 30mm from standard) causing them to bend upwards at a bit of a curve (which gets even tighter if the suspension compresses) if the hoses were even longer, they would form an even tighter curve under the same suspension movemnent. Now I can see why this may not have been noted before, but even the standard hose can be a little too long on a lowered car, so before you start saying how many you have sold, why not just give the poor bloke what he asked for like a good supplier does.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

I won't ask next time, Not worth the hassle just to get some measurement's to help a customer out,

PS, I don't make them for your referance

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,

swsmpy = cock

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

mine were too long so my mechanic said, but he also stated it wasnt a problem and there was nothing being fouled/rubbing ect, neil gti_6 had his fitted at the same time too.
i noted the difference and thought they were great value for money.
just my £6.99's worth.

________________________________________

team umpalumpa.

as i said, im not slating them just i was told they were long.

no dramas.

________________________________________

team umpalumpa.

Hi swampy just wondering whether there was any news on my Hoses? Cheers

________________________________________

Super high boost Completed, destroyer of gearboxes and 160mph club