Post #151
is there any more up for grabs?i know manthos has moved house and is awaiting internet.
thanks
|
| Author | Subject: Lower strut braces |
 jimbok_b16
Newbie  Location: Norwich Registered: 30 May 2016 Posts: 48 Status: Offline |
i know manthos has moved house and is awaiting internet. thanks |
 Posted 8th Mar 2017 at 18:11
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #152
welshpug! wrote: Didn't think youd sell one to him after the brake debacle  So long as they've been made safe/helicoiled since that's it as far as I'm concerned - I can't say I was happy about it, but mainly just don't want anyone coming back down to me about down the line having had an accident... If he wants a brace that's no trouble my end.  I'm going to do another batch Jimbok but it's going to be the odd couple here and there around other jobs as I'm busy at the minute and not in the best of health either. Oh, also....   ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 8th Mar 2017 at 19:56
|
|
|
Cjwatson27
Seasoned Pro  Location: Oxford Registered: 17 Sep 2013 Posts: 1,968 Status: Offline |
Post #153
Could I have a custom one done once I've had a measure up had to cut quite abit from my subframe so wouldn't mind adding some strength to it just in case ________________________________________ Old pugs don't die they just get faster |
|
Posted 8th Mar 2017 at 20:01
|
|
|
mocinim
Seasoned Pro  Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #154
phillipm wrote: welshpug! wrote: Didn't think youd sell one to him after the brake debacle So long as they've been made safe/helicoiled since that's it as far as I'm concerned - I can't say I was happy about it, but mainly just don't want anyone coming back down to me about down the line having had an accident... If he wants a brace that's no trouble my end. I'm going to do another batch Jimbok but it's going to be the odd couple here and there around other jobs as I'm busy at the minute and not in the best of health either. Oh, also.... Sweet need some more cyclones how much for 4  ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
|
Posted 8th Mar 2017 at 20:08
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #155
Yeah, no worries, just get me some dimensions/pictures.Or bring it up and I'll make it on the car. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 8th Mar 2017 at 20:08
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #156
mocinim wrote: Sweet need some more cyclones how much for 4 Trying for a full set and a spare? ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 8th Mar 2017 at 21:21
|
|
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #157
phillipm wrote: mocinim wrote: Sweet need some more cyclones how much for 4 Trying for a full set and a spare? Yep then ill just need the car to go with lol ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
|
Posted 8th Mar 2017 at 21:30
|
|
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #158
Seriously there awsome keyrings for the spares ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
|
Posted 8th Mar 2017 at 21:30
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #159
I did give a it quick coat of silver 'fore I sent it, really needs a rub down and another mind.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 9th Mar 2017 at 00:25
|
|
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #160
Its getting another coat soon as i start with the painting of the car again this year just waiting on some sun ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
|
Posted 9th Mar 2017 at 07:41
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #161
Your only problem now is these are the smaller + thicker ones so they don't match yours  ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 9th Mar 2017 at 15:18
|
|
|
fatlapit
Seasoned Pro  Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #162
heywhats the crack with the upper brace? ________________________________________ |
|
Posted 9th Mar 2017 at 16:16
|
|
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #163
phillipm wrote: Your only problem now is these are the smaller + thicker ones so they don't match yours Still want some more if there available ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
|
Posted 9th Mar 2017 at 16:25
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #164
Ah, there's a couple of spare sets off that lot, they're a bit lower resolution than yours though.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 9th Mar 2017 at 18:03
|
|
|
jimbok_b16
Newbie Location: Norwich Registered: 30 May 2016 Posts: 48 Status: Offline |
Post #165
cheers. let me know when you have another brace available. hooe you get better soon. thanks |
|
Posted 9th Mar 2017 at 18:35
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #166
 Bit 'o' sanding/smoothing and a quick layer of paint. Do people just want them as is to sand and paint yourselves to match the car or would you rather buy 'em already painted? ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 10th Mar 2017 at 22:15
|
|
|
foot
Senior User  Location: worthing Registered: 09 Aug 2008 Posts: 754 Status: Offline |
Post #167
hey any update on the upper strut braces? |
|
Posted 29th Mar 2017 at 20:51
|
|
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #168
Any update on my wheels ???  ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
|
Posted 29th Mar 2017 at 20:57
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #169
foot wrote: hey any update on the upper strut braces? I've just finished adjusting the cores for the prototype ready for carbon ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 29th Mar 2017 at 23:24
|
|
|
foot
Senior User Location: worthing Registered: 09 Aug 2008 Posts: 754 Status: Offline |
Post #170
looking forward to seeing these finished |
|
Posted 30th Mar 2017 at 09:49
|
|
|
fatlapit
Seasoned Pro Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #171
me too________________________________________ |
|
Posted 30th Mar 2017 at 12:04
|
|
|
russbez
Seasoned Pro  Location: Inverness-Shire Registered: 19 Dec 2005 Posts: 7,459 Status: Offline |
Post #172
nice one________________________________________ TEAM HIGH BOOST SUPERCHARGED RALLYEMy Rallye project thread |
|
Posted 31st Mar 2017 at 10:01
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #173
You should try one of my models,...These are quite old now but Would be interesting to see some of these turned into keyrings! Often though about having some of my stuff printed!   ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 1st Apr 2017 at 12:25
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #174
If you want one doing send it me, I might have to do it a bit larger on the more complex ones just to get the detail properly in the layers, the lowest I can do with decent quality at the minute is about 0.06mm per layer, but it takes ages ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 1st Apr 2017 at 12:55
|
|
|
gnrlee
Forum Admin Location: Leeds Registered: 20 Aug 2005 Posts: 8,882 Status: Offline |
Post #175
PM'd  ________________________________________ Proud Member of the ASTOR Owners Club |
|
Posted 1st Apr 2017 at 18:39
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.