➜ advanced search
Add a more detailed reply Start a new thread in the General forum
Home -> Forums -> General -> My 6 Car Fire

displaying posts 1 to 25 of 50

Pages (2): [1] 2

Author Subject: My 6 Car Fire
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #1
Well I started my car yesterday to move it & left it ticking over for a while as its not been started for a while ...
I'm looking under the bonnet as I can smell petrol & then I've got 2-3ft flames coming out of my drivers side under car by side of subframe ...
Turn ignition off then kill switch & grab a 2litre foam Fire Extinguisher & put it out ....
Was on fire for 5-10 secs ?
It appears my Fuel lines been rubbed & hit & it just gave up & sprayed Petrol towards my hot Manifold & the rest is history Crazy
No damage apart from all three plastic fuel lines burnt inc one that goes to the drivers side inner wing Breather canister ...

I think it's time for a under boot swirl pot & Teflon / Braided fuel lines through out ...going to visit Torques tomorrow hopefully ...
I S-it myself LOL

Day666 has attached the following image:

Posted 28th Feb 2016 at 19:28
Profile
aaron6

Seasoned Pro

Location: On the sofa in maidstone

Registered: 16 May 2006

Posts: 5,840

Status: Offline
Post #2
f**k. Close call then.

________________________________________

See the sheer power and might of the lesser known burrowing owl.



Posted 28th Feb 2016 at 19:29
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #3
aaron6 wrote:
f**k. Close call then.


I recon another 10seconds & it would of been to late ....I needed to use another Faom 2litre after the first one ...they only last seconds ...thank god I had two to hand ...

Lesson learned going Teflon braided ...far far to close ...Aarron Whistle
Posted 28th Feb 2016 at 19:34
Profile
cully

Seasoned Pro

Location: Cullompton

Registered: 12 Jun 2013

Posts: 1,093

Status: Offline
Post #4
8mm copper or aluminium will be cheaper for full length under car Wink
Posted 28th Feb 2016 at 20:11
Profile
prism7guy

Seasoned Pro

Location: DoncastAAAAARGH

Registered: 13 Jan 2008

Posts: 4,640

Status: Offline
Post #5
I had a close call with mine when i first got the track car back on the road, the fuel rail mounting bolts vibrated out whilst driving, then 'pop' as the rail lifted off the injectors and sprayed petrol everywhere.
Luckily it didn't ignight or i'd have been pretty screwed!
The next day i went out and bought myself an extinguisher that now lives in the car Laugh

________________________________________

Goldie the track car.
Posted 28th Feb 2016 at 20:31
Profile
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline
Post #6
This is why I have a plumbed in system

________________________________________

Nothing to see here
Posted 29th Feb 2016 at 08:46
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #7
cully wrote:
8mm copper or aluminium will be cheaper for full length under car Wink


I'm going Teflon Cully ..but thank you m8
Posted 29th Feb 2016 at 09:00
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #8
prism7guy wrote:
I had a close call with mine when i first got the track car back on the road, the fuel rail mounting bolts vibrated out whilst driving, then 'pop' as the rail lifted off the injectors and sprayed petrol everywhere.
Luckily it didn't ignight or i'd have been pretty screwed!
The next day i went out and bought myself an extinguisher that now lives in the car Laugh


Your a very lucky bloke ....it's opened my eyes massively !!!!
Posted 29th Feb 2016 at 09:01
Profile
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline
Post #9
well Saved! Big grin

________________________________________

Proud Member of the ASTOR Owners Club
Posted 29th Feb 2016 at 09:03
Profile
Cjwatson27

Seasoned Pro

Location: Oxford

Registered: 17 Sep 2013

Posts: 1,968

Status: Offline
Post #10
cully wrote:
8mm copper or aluminium will be cheaper for full length under car Wink


I was told you couldn't use copper for fuel lines when I did my fuel lines on my mini. Or was this lies ?

________________________________________

Old pugs don't die they just get faster
Posted 29th Feb 2016 at 10:45
Profile
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline
Post #11
The copper will leach into the fuel, especially with modern ethanol content.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 29th Feb 2016 at 12:34
Profile
mocinim

Seasoned Pro

Location: The Darkside of bedford :)

Registered: 09 Jan 2015

Posts: 2,307

Status: Offline
Post #12
Cjwatson27 wrote:
cully wrote:
8mm copper or aluminium will be cheaper for full length under car Wink


I was told you couldn't use copper for fuel lines when I did my fuel lines on my mini. Or was this lies ?



Possibly just because you had a mini

________________________________________

BLACK RALLYE - phoenix
WHITE RALLYE - valliant

http://public.servicebox.peugeot.com/

https://www.gov.uk/check-mot-history
Posted 29th Feb 2016 at 12:38
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #13
phillipm wrote:
The copper will leach into the fuel, especially with modern ethanol content.


You are just full of interesting stuff Phillip Thumbs up
Posted 29th Feb 2016 at 12:40
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #14
gnrlee wrote:
well Saved! Big grin


David far too close m8 ....LOL
Posted 29th Feb 2016 at 12:40
Profile
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline
Post #15
Day666 wrote:
phillipm wrote:
The copper will leach into the fuel, especially with modern ethanol content.


You are just full of interesting stuff Phillip Thumbs up


That's not what most people call it LOL

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 29th Feb 2016 at 12:49
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline
Post #16
how long will that take to have any effect? where can I get 8mm steel lines?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 29th Feb 2016 at 13:19
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #17
Rang Torques & they won't let me collect ?....I'm in bloody Abergavenny Now for 2hrs working ....how stupid ! Thumbs down
Posted 29th Feb 2016 at 13:32
Profile
scotzman

Seasoned Pro

Location: Dundee

Registered: 24 Jun 2011

Posts: 1,408

Status: Offline
Post #18
welshpug! wrote:
how long will that take to have any effect? where can I get 8mm steel lines?


What size is the stuff you get from Peugeot for 205's etc? must be around 8mm, comes in lengths of about 4m.

________________________________________

'90 1.6 205 GTi, '98 306 GTi-6
Posted 29th Feb 2016 at 13:26
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline
Post #19
Day666 wrote:
Rang Torques & they won't let me collect ?....I'm in bloody Abergavenny Now for 2hrs working ....how stupid ! Thumbs down


LOL

yeah they haven't got a shop, its just an industrial unit but might not be anyone in.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 29th Feb 2016 at 13:53
Profile
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline
Post #20
welshpug! wrote:
how long will that take to have any effect? where can I get 8mm steel lines?


IIRC - might be out a bit here, it's a while since I read the studies - it was about 10-15 years to eat through enough copper wall thickess (just over a mm or so) to make the pipe burst at injection pressures with e10.
However, that's accelerated where you've bent the pipe and a)made it thinner and b ) introduced stress microcracking from forming it.
I'm sure I saw somewhere selling coated copper for fuel lines though, might be one of the hotrod sites as I was looking for stainless steel brake piping at the time.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 29th Feb 2016 at 14:59
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #21
welshpug! wrote:
Day666 wrote:
Rang Torques & they won't let me collect ?....I'm in bloody Abergavenny Now for 2hrs working ....how stupid ! Thumbs down


LOL

yeah they haven't got a shop, its just an industrial unit but might not be anyone in.


The bloke never answers his phone ?
Only talks via email & Ebay ....sod him I'm off to Merlin Mororsport don't want to deal like that thank you Torques
Posted 29th Feb 2016 at 15:21
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline
Post #22
fine if you want to waste cash, youll have them tomorrow if you order them.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 29th Feb 2016 at 16:11
Profile
miles

Seasoned Pro

Location: Ringwood

Registered: 28 Dec 2002

Posts: 3,433

Status: Offline
Post #23
Give Think Automotive a call, Good team there and thats where all my bits come from, if you speak to Matt (Director) tell him I sent you

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,
Posted 29th Feb 2016 at 22:55
Profile
pete_rallye

Seasoned Pro

Location: Yorkshire

Registered: 12 Dec 2002

Posts: 5,253

Status: Offline
Post #24
I've just plumbed in a full dry sump system and redone all my fuel hoses in BMRS Pro Gold hose. The best prices by far were with Rally Design, they were nearly 50% cheaper than Think Auto, although I've always had good service from Think but they do seem to be pricey.

Unfortunately Rally Designs prices made Torques stuff look expensive for what is a cheaper product, but aside from that I could not fault Torques, brilliant service and very helpful, even let me return a load of stuff past the returns period so I still get a lot of stuff from them, and fast delivery too, almost everything arrives next day. Only reason I didn't use them in the end was there PTFE hose isn't as bendy as I needed, so I had to move onto the BMRS stuff which is convoluted and very bendy!

Phil, sure the coated copper was the correct stuff? Most copper is coated externally which I can't see would help with fuel, unless someones selling internally coated copper?! I'd use powder coated aluminium tube, often called hard tube, or hardline or something, its bendable and also resistant to all fuels.

________________________________________

Oulton Park in a BTCC 306 vid 1
Oulton Park in a BTCC 306 vid 2
Lap of the 'ring
Posted 1st Mar 2016 at 01:06
Profile
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline
Post #25
Yeah, internal coated, can't remember what it was called but it was under a trade/brand name. Will have a look for it.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 1st Mar 2016 at 02:08
Profile
Home -> Forums -> General -> My 6 Car Fire

Pages (2): [1] 2

All times are GMT. The time is now 05:27

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.