displaying posts 1 to 25 of 30

Pages (2): [1] 2

Author Subject: Spares or Repair 306 V6
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #1
Here is my 306 GTi-6 with a V6 conversion.

Im selling this as I just haven't got the time to put it back on the road, it started a life as just an ordinary GTI-6 but when the engine blew up I decided to go for a V6. This took along while to complete and cost a lot of money in the process. It has been off the road since early last year. It starts and drives although I think the battery is knackered.

The conversion was carried out by a friend using the conversion package I bought from Hanpug, although I used an engine that I already had which had a cambelt and waterpump change whilst out of the car. I got the engine from Ade the 406 breakers in chesterfield he said the engine had covered around 80k but I have no proof of mileage. I have very little history for it just a few mots

The car itself has covered 122095 miles but as the speedo is not working the mileage has not gone up since the engine was put in. We never got round to getting that working. The interior is in good condition with no rips just normal wear. The Spare wheel is on due to the cyclone being punctured and worn the other front tyre is also worn below the legal limit. The rear are Toyo Proxes and have quite abit of tread left.

The exterior door handle snapped of but do have one that is included. Also have some more sideskirts as the ones on it are cracked. The car has a few minor marks and blemishes and the bonnet has some dents and dings. There are some scratches on the passenger rear quarter and a slight bit of rust on one of the arches.

It has an oil leak but not sure where from, it may just require the sump resealing.

It has NO tax and NO MOT

Its a 99 V REG

It has a few modifications as follows

Lowered 30mm on Bilsteins and Eibach springs with rear beam to match
Valeo Black Mask Headlights
OMP Strut Brace
De locked
Sebring exhaust backbox
Pipercross induction kit


This is a very fast car and a thrill to drive but due to having a little one and saving for a mortgage is impractical. Im sure a few hundred pounds and abit of time and I could easily be back on the road.

I've probably missed loads, any questions please ask.

Im going to ask £600 for it, may break if I don't have much interest in it as a whole.

Gave it a wash and polish the other day and it does come up well.











Apologies for poor picture quality will try and find the camera and take some.

________________________________________

Team V6
Posted 28th Jun 2013 at 15:36
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #2
wondered where that wiring loom went LOL

what did you do with the SES mount?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 28th Jun 2013 at 15:47
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #3
I sold that LOL The car already had the mounts sorted before I bought the package so just kept it at that.

________________________________________

Team V6
Posted 28th Jun 2013 at 16:01
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline

Post #4
Hmm....

________________________________________

Nothing to see here
Posted 28th Jun 2013 at 19:50
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline

Post #5
Hmmmmmmmmm......

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 28th Jun 2013 at 20:09
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #6
Hmm

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 28th Jun 2013 at 20:18
axnxdxy

Regular

Location: Kenilworth

Registered: 05 Dec 2008

Posts: 213

Status: Offline

Post #7
Hmmm...
Posted 28th Jun 2013 at 20:32
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline

Post #8
Rose tints firmly on for me though Wink

________________________________________

Nothing to see here
Posted 28th Jun 2013 at 20:44
gilesy

Seasoned Pro

Location: Greenwich - in that London

Registered: 03 Apr 2006

Posts: 5,133

Status: Offline

Post #9
Hmmmmmmm
Posted 28th Jun 2013 at 20:45
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #10
what clutch setup and cooling layout does it run?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 28th Jun 2013 at 20:47
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #11
oh, and


Hmmmmm. Hmm

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 28th Jun 2013 at 20:48
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #12
Same clutch setup as the one you did. How do you mean cooling layout?

________________________________________

Team V6
Posted 28th Jun 2013 at 20:51
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline

Post #13
Its the same rad as mine by the looks Mei. The slam panel looks familiar, although the coolant reservoir isn't.
So its a solid arm out the top of the box on a cable?

Oil leak will almost certainly be a cam cover. I think they leaked from new LOL
Speedo is a p**s easy fix Smile

________________________________________

Nothing to see here
Posted 28th Jun 2013 at 20:58
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #14
Yeah same clutch as yours also same setup with regards to rad etc. Thats your 205 header tank also.

________________________________________

Team V6
Posted 28th Jun 2013 at 21:02
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #15
Speedo worked in the rallye, so can't think why it doesnt now.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 28th Jun 2013 at 21:04
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #16
Don't know why it doesn't work, im sure an easy fix for someone with abit of knowledge. Just never got round to investigating it.

________________________________________

Team V6
Posted 28th Jun 2013 at 21:07
hovis16

Seasoned Pro

Location: Reading/parts for sale

Registered: 21 Nov 2008

Posts: 4,306

Status: Offline

Post #17
Hmmmmmmmm

________________________________________

Ph2 Black GTI 6!

EX black 6 owner
But now a Black caged rallye owner

Hunting for Go faster bits!


SEARCH

click here
Posted 28th Jun 2013 at 23:22
mike rallye

Seasoned Pro

Location: mold

Registered: 03 Sep 2008

Posts: 1,618

Status: Offline

Post #18
If you break would be interested in the exhaust and omp strut brace .pm me
Posted 28th Jun 2013 at 23:29
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #19
Less hmmmm more buyyyy!!!

________________________________________

Team V6
Posted 29th Jun 2013 at 18:51
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #20
Bump.

Will take £475 for this without the strutbrace and with crystal headlights rather than the masks.

________________________________________

Team V6
Posted 1st Jul 2013 at 20:38
armzsc6

Seasoned Pro

Location: Crowborough

Registered: 22 Mar 2008

Posts: 3,445

Status: Offline

Post #21
Hmmmmmmm Hmm I'm in Wrexham and coming past Tomoz or wes to go home to Sussex...

________________________________________

Black power baby! SUUUUUPERCHARGED Superman
Seat Leon FR TDI 190BHP 300lbft daily gti-6 killer :p
12x 306's owned so far

Cambelts, clutches, service work carried out on All makes and models, Peugeot Citroen / mitsubishi specialist.
Pug planet / Citroen Lexia diagnostics / code reads available.
Posted 1st Jul 2013 at 21:55
mr west

Senior User

Location: herts

Registered: 13 Sep 2010

Posts: 742

Status: Offline

Post #22
i'd like the stutbrace

________________________________________

white rallye
cherry dead rallye
s16
Posted 1st Jul 2013 at 22:37
burnout21

Regular

Location: Edge of the Pass

Registered: 23 Apr 2008

Posts: 248

Status: Offline

Post #23
Is the exhaust same fitment from cat back as gti-6?
Posted 2nd Jul 2013 at 08:16
shimmy

Senior User

Location: Shrewsbury

Registered: 17 Oct 2009

Posts: 571

Status: Offline

Post #24
The exhaust is just the back box I think. Was on when I bought it.

________________________________________

Team V6
Posted 2nd Jul 2013 at 08:19
v6saloon

Senior User

Location: Ilkeston

Registered: 24 Sep 2010

Posts: 619

Status: Offline

Post #25
This still for sale mate? Is it ok to drive as have a mate with trade plates

________________________________________

205 mi16
405 Mi16x4 restoration project
406 v6 saloon track car project/daily driver
508 Hdi
Posted 4th Jul 2013 at 21:30

Pages (2): [1] 2

All times are GMT. The time is now 20:27

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.