306 BTCC - Projects Forum - Peugeot 306 GTi-6 & Rallye Owners Club

displaying posts 1 to 25 of 142

Pages (6): [1] 2 3 .. last

Author

Subject: 306 BTCC

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #1

Thought I would start a thread on this as Im now getting it ready to race for next year.

After a track day earlier this year it started to smoke badly, so bad that they black flagged me in the end!

so it was out with the engine for a strip down,

with the engine on the floor it looks nothing special, just like a standard GTi-6 engine!

the head was taken off to find lots of play in the pistons! Number 1 rings were gone and head gasket had also gone between 1 and 2 aswell as 3 and 4 cylinders so no wonder it was smoking!

sump taken off and a really nice bottom end was found!

engine haas now been taken to a local race engine builder to have rings, pistons and bores sorted out.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 11th Nov 2012 at 17:31

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #2

It was then decided to do away with the old and complicated ecu and dash, and fit omwx with jenvys, aswell as removing lots of stuff which is no longer needed in the race series we will be running in order to try and keep the wieght down.

so air jack system is now out, although I loved them they are quite heavy and just not needed!

lots of carbon parts,

most will go back in but the floor trays may not as again they are just not needed, plus the are fairly heavy being as they are lined with kevlar!

all dash wiring and engine wiring out

found a touring car spec hair dryer behind the dash! not really sure why it was there, in behind the dash display?

looking a bit bare now!

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 11th Nov 2012 at 17:32

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #3

As jenvys are going I decided to try to copy a 306 maxi air intake system,

so a spare front panel and grille was cut down to allow the air intake to go straight into the jenvys

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 11th Nov 2012 at 17:32

Profile

blandy

Seasoned Pro

Location: Bucks

Registered: 25 Feb 2007

Posts: 2,437

Status: Offline

Post #4

loving the intake been trying to modify mine in a similar way allthough doesnt look half as good as yours.

look forward to seeing the progress

Posted 11th Nov 2012 at 17:48

Profile

hovis16

Seasoned Pro

Location: Reading/parts for sale

Registered: 21 Nov 2008

Posts: 4,306

Status: Offline

Post #5

looking good

________________________________________

Ph2 Black GTI 6!

EX black 6 owner
But now a Black caged rallye owner

Hunting for Go faster bits!

SEARCH

click here

Posted 11th Nov 2012 at 19:14

Profile

pugheaven

Seasoned Pro

Location: Fareham

Registered: 17 Dec 2006

Posts: 4,602

Status: Offline

Post #6

Any carbon panels that your not using I may be intrested in!

Posted 11th Nov 2012 at 19:28

Profile

pugheaven

Seasoned Pro

Location: Fareham

Registered: 17 Dec 2006

Posts: 4,602

Status: Offline

Post #7

Ps I might be able to get you a carbon btcc intake for the bodies if your after one

Posted 11th Nov 2012 at 19:31

Profile

p1234

Junior User

Location: Dublin

Registered: 27 Apr 2010

Posts: 54

Status: Offline

Post #8

Would the hair dryer maybe have been a make shift window di-mister?

Posted 12th Nov 2012 at 18:32

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #9

pugheaven wrote:

Any carbon panels that your not using I may be intrested in!

not yet

pugheaven wrote:

Ps I might be able to get you a carbon btcc intake for the bodies if your after one

let me know if you can and some pics and price please

p1234 wrote:

Would the hair dryer maybe have been a make shift window di-mister?

I thought that at first but where it was mounted it was not able to get to the screen?

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 12th Nov 2012 at 20:32

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #10

maybe to warm feet up? LOL

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 12th Nov 2012 at 20:36

Profile

p1234

Junior User

Location: Dublin

Registered: 27 Apr 2010

Posts: 54

Status: Offline

Post #11

Or dry the feet on those wet days to avoid slippy pedals!!

Best of luck with the 're model, cracking car!

Posted 12th Nov 2012 at 22:01

Profile

p1234

Junior User

Location: Dublin

Registered: 27 Apr 2010

Posts: 54

Status: Offline

Post #12

Or dry the feet on those wet days to avoid slippy pedals!!

Best of luck with the 're model, cracking car!

Posted 12th Nov 2012 at 22:49

Profile

demondriverdan

Seasoned Pro

Location: Londinium

Registered: 29 Nov 2010

Posts: 2,665

Status: Offline

Post #13

If you're ever at Brands let me know and I'll pop over (even trackdays / testing etc). Might be able to get trackside and grab some photos for you as well.

________________________________________

Rallye Race Car

Posted 12th Nov 2012 at 22:51

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #14

demondriverdan wrote:

If you're ever at Brands let me know and I'll pop over (even trackdays / testing etc). Might be able to get trackside and grab some photos for you as well.

yeah the CSCC will race at Brands next year as they always do, as soon as the dates are published I will let you know.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 12th Nov 2012 at 22:55

Profile

demondriverdan

Seasoned Pro

Location: Londinium

Registered: 29 Nov 2010

Posts: 2,665

Status: Offline

Post #15

Carl Chambers wrote:

demondriverdan wrote:

If you're ever at Brands let me know and I'll pop over (even trackdays / testing etc). Might be able to get trackside and grab some photos for you as well.

yeah the CSCC will race at Brands next year as they always do, as soon as the dates are published I will let you know.

Cool beans, I'll be there (unless I'm in Newcastle, but I'll still try)

________________________________________

Rallye Race Car

Posted 12th Nov 2012 at 22:57

Profile

306 Rxs

Regular

Location: Gondomar

Registered: 01 Jan 1970

Posts: 184

Status: Offline

Post #16

Can you tell me the camber/toe values of your rear axle??

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

Posted 13th Nov 2012 at 11:55

Profile

clen666

Seasoned Pro

Location: Co. Durham

Registered: 12 Feb 2009

Posts: 2,401

Status: Offline

Post #17

looking good.

how have you modified the slam panel? have you just cut away the top skin?

________________________________________

Team 'unintentional rat look'

Posted 13th Nov 2012 at 19:19

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #18

306 Rxs wrote:

Can you tell me the camber/toe values of your rear axle??

I know the rear camber is 3 degrees not sure off hand what the rear toe is but will find out for you

clen666 wrote:

looking good.

how have you modified the slam panel? have you just cut away the top skin?

thanks

the front panel was cut either side inside the headlamps, and re-welded back together lower down, and the middle par is 3 front panels cut up to get a straight flap piece without the bonnet catch and then all weled together!

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 13th Nov 2012 at 20:45

Profile

clen666

Seasoned Pro

Location: Co. Durham

Registered: 12 Feb 2009

Posts: 2,401

Status: Offline

Post #19

Damn, didn't think it would be as simple as I'd hoped!

Looks like a good job on it though, I'll try and do something similar as I like the increased air flow you will get

________________________________________

Team 'unintentional rat look'

Posted 13th Nov 2012 at 20:50

Profile

pete_rallye

Seasoned Pro

Location: Yorkshire

Registered: 12 Dec 2002

Posts: 5,253

Status: Offline

Post #20

Rear camber and toe is adjustable so there are no fixed settings. Probably best to find somewhere that works for you and leave it at that, rather than alter for different circuits. Apparently they used to run upto 6mm toe out at the rear to get the slicks up to temp and to aid turn in. I imagine it was quite scary to drive though!

________________________________________

Oulton Park in a BTCC 306 vid 1
Oulton Park in a BTCC 306 vid 2
Lap of the 'ring

Posted 13th Nov 2012 at 21:13

Profile

306 Rxs

Regular

Location: Gondomar

Registered: 01 Jan 1970

Posts: 184

Status: Offline

Post #21

I'm now making a new part for the rear axle, but the my doubt is "do i make it adjustable or not?". If i had some reference values, it could help me decide.

I always prefered to drive with the rear, but using more than toe =0, is out of my track experiences.
The first time i drove a zx 16v with 0 toe, the impression was quite good.

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

Posted 13th Nov 2012 at 23:29

Profile

demondriverdan

Seasoned Pro

Location: Londinium

Registered: 29 Nov 2010

Posts: 2,665

Status: Offline

Post #22

306 Rxs wrote:

Do you know what toe the 6 beam runs as standard?

________________________________________

Rallye Race Car

Posted 13th Nov 2012 at 23:39

Profile

306 Rxs

Regular

Location: Gondomar

Registered: 01 Jan 1970

Posts: 184

Status: Offline

Post #23

Yes...i have the list of camber/toe for all the zx and 306. Wink

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

Posted 13th Nov 2012 at 23:47

Profile

306 Rxs

Regular

Location: Gondomar

Registered: 01 Jan 1970

Posts: 184

Status: Offline

Post #24

year..............Make..............Model......... ..........Variant...............................Toe..........Camber (degrees/minutes)
85 - 92..........Peugeot..........205.................. .....1.6 GTI, 1.9 GTI, Rallye.......3.6...........0.5
85 - 92..........Peugeot..........205 / 309..............Base............................. ......3.1..........0.5
93 -->...........Peugeot..........205................... ....Cab, Van, Base....................3.4..........0.5
86 - 90..........Peugeot..........309.................. .....GTI.....................................3.8.. .......0.5
90 - 93..........Peugeot..........309.................. .....GTI, GTI16..........................5............1.15
94 -->...........Peugeot..........306................... ....S16, GTI-6..........................4.2..........1.2
97 -->...........Peugeot..........306................... ....1.8 16v...............................3.4..........1.2
98 -->...........Citroen...........Xsara................ ....Base...................................4.5.... ......1.2
98 -->...........Citroen...........Xsara................ ....VTS.....................................5..... .......1.2
93 -->...........Citroen...........ZX................... ......Base, 16v............................0.............1

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

Posted 13th Nov 2012 at 23:55

Profile

pete_rallye

Seasoned Pro

Location: Yorkshire

Registered: 12 Dec 2002

Posts: 5,253

Status: Offline

Post #25

First time I drove with zx rear arms with 0 toe i did this... http://www.youtube.com/watch?v=rRx0r3KxY_o

Didn't honestly notice a great change in turn in but did notice it was much harder to get the car under control again if the rear end stepped out! Although the crash was mainly thanks to wet grass, or thats my excuse anyway...

________________________________________

Oulton Park in a BTCC 306 vid 1
Oulton Park in a BTCC 306 vid 2
Lap of the 'ring

Posted 14th Nov 2012 at 20:39

Profile

Pages (6): [1] 2 3 .. last

All times are GMT. The time is now 02:09

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.