Hi, due to a change of plans, i will have some parts to sell from my project.

- Racing clutch with extremely good pedal feeling...not hard as a truck. - 170pounds
It has a nem thicker plate too.




- Custom close ratio 5speed gearbox with plated LSD (one trackday of use) - 700pounds.
I can show the specs of it to anyone who's interested.



- 4 wossner forged hi compression pistons with rings (3 like new and 1 new) - 350pounds

- 16 oem valves (8 inlet/8 exhaust) - 80pounds

- Refurbed Rear Lightweight Calipers (handbrake parts eliminated, only works with hydraulic handbrake) - 70pounds



A combined sale is prefered, but can do separate one's.
Bigger/important parts need to be sold , so i can sell the rest after.

If you buy several items, price will be adjusted.

Postage will not exceed 50pounds for the bigger/heavier parts.

Smaller parts will get around 15 to 25 pounds to send.

Paypal payment only.

Can check my feedback on ebay (306_rxs)

Complete engine swap is in study...


Photos from most of the parts are on my project...

http://www.306gti6.com/forum/showthread.php?id=145487

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/314143_521051874579011_2049066880_n.jpg

Velocity stacks can be included.

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

Interested in box, would like some info though please

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

If only I hdnt skinted myself this month on car bits

________________________________________

'97 PH1 'Sigma Blue' 306 GTI 6 project 'Tooters'
194.2bhp 127.6 dB
'96 PH1 'Black Noir' 306 DTurbo (project in permenant storage)
'94 300tdi LR Discovery (project gone dead and buried)
'99 td5 LR Discovery 2 (trailer tug and family bus) project 'in the garage getting chassis welded' (again)
The 6 can go fast, the disco can go anywhere
Built: 9 January 1997 - that's a Thursday
Skip Brown cars: tarporley Cheshire Tel: 01829 720492
add me --> philbrindley85@hotmail.com
TEAM: Snapper

The LSD installed, was a clutch plate type...done by a portuguese company specalized in these kind of components.

http://www.rmc.com.pt/

I´ve decided to use the the s16 housing and final drive, wich is the shortest from psa range for BE gearboxes.
All the gears, from 1st to 5th are from a gti6 box...and this is the best setup for getting a close gear ratio, using original parts. The assembly was not a direct fit, because it needs some machining on the primary shaft.

The chosen gear ratios for 7500rpm / 4,43 FD / 205-50-15 are:

1st - 2.92 - 68kmh
2nd - 1.85 - 107kmh - 5009rpm
3rd - 1.41 - 141kmh - 6008rpm
4th - 1.15 - 173kmh - 6457rpm
5th - 0.95 - 209kmh - 6544rpm

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

Pm sent!

________________________________________

Team Running Engine again!
Team Negative Camber!
My Budget track engine build thread!
Now appearing at a Trackday near you!!

Do the maths and let me know if any of that FD's that you've mentioned can be usefull on a real circuit.
Kart tracks not included of course.

If you didn´t understand it with a short number of words, i can help you to get the point with some numbers or track use experience.

If you care to search a little bit more, you'll also see that the car for wich this box was made, should have over 200hp with less than 900kgs...

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

and how does that make 4.43 shorter than 4.7, 4.9 or 5.1?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

pics of the inlet manifold for the ITBs please - and first dibs if I'm the first..

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™

you still haven't qualified this statement.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

...for circuit use! Is there enough or do you want me to draw you a picture?!

Pics of the manifold for soon...i didn't have it at home as i thought.

________________________________________

What is a hybrid?

Honda engine...Ford brakes...Peugeot chassis...Vauxhall steering...

you got any pics of exhaust mate

________________________________________

Team Moonstone

Team Working Aircon

Pretty sure its fair to point out if something is'nt accrately described, but no more spamming from me though. The box is'nt what I'm after but good luck with the sale.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars