SOLD - Gaz Gold Coilovers + various springs (Price drop) - Parts For Sale Forum

Post #1

Complete set of Gaz Golds. Full working order been on my car for a couple of months before deciding the roads round here really need relaying!

Front shocks - bit of tarnishing on the bodies, adjusters fully working.
Rear Shocks - The surface on these is shocking and falls off if you look at them funny. Unit itself is solid. Adjusters still working.

10inch 250lb springs
8inch 325lb springs
4inch 125lb helper springs

top cups (standard suspension)
top cups (for solid top mounts) - not in pic need to dig them out.
helper -> main cups

Set of spanners (not in pic)

bump stops

some tops mounts and bearings - okay condition.

£450 + postage + PayPal Fee's

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #2

What height can these lower the front too ?

________________________________________

Team Moonstone Big grin

Team Working Aircon

Post #3

How much with just standard top mounts

Post #4

Just read it properly and realised adjustable top mounts are not included just the cup!
My bad

Post #5

Would you sell the 325 springs separately?
What internal diameter are they?

________________________________________

Cherry rallye - DOB Thursday 29/04/1999
Team Rallye - the leaner, meaner, better looking sister of the GTI6 Big grin

roland rat wrote:

You sir either live for the 6 or have a mental retardation to still be repairing this!

The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fecking temperamental.

Post #6

I would like to shift the whole lot together if there is interest.

No exact measurements as far as lowering goes, they can go very low, at one point I had my 16's into the front arches whilst messing around with the settings.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #7

Just a question, the 125 lb 'helper springs' are you sure they're not part of a tender progressive set up?

________________________________________

Team Running Engine again!
Team Negative Camber!
My Budget track engine build thread!
Now appearing at a Trackday near you!! Hyper

Post #8

At 125 lb I would say they are tender springs as helper springs are generally no more than 10 lb.

Post #9

They probably are, I'm just making space in my sheds.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #10

Bump - Price drop - £450.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #12

Replied.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #13

jeffers wrote:

Just a question, the 125 lb 'helper springs' are you sure they're not part of a tender progressive set up?

They look like helpers though, being flat section... Faulkner make helper springs from 4 to 230lb

________________________________________

Nothing to see here

Post #14

If you do decide to split, how much for the rear shocks?

________________________________________

Chris
1999 China Gti6 Supercharged Devil

[Fun car] >>Project Thread<<
2000 Bianca 306 Diesel [Work runabout]

Post #15

Interested in the helper springs if you split!

________________________________________

owain wrote:

A GTI-6 with a good dashboard and the seats down can outsprint an E46 M3 in July.

Post #16

atterz wrote:

Interested in the helper springs if you split!

Just buy some from Merlin Motorsport, or let me know what you want and i'll ask Curtis.
Those stickers finally went in the post today btw.

________________________________________

Nothing to see here

Post #17

At 125lb/inch it's a tender setup. But tbh it's all semantics anyway, they both do the same thing.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.

Post #18

phillipm wrote:

At 125lb/inch it's a perfect setup for my fleabag 700kg 1.4. But tbh it's all semantics anyway, they both do the same thing.

EFA

________________________________________

Nothing to see here

Post #19

adam b wrote:

atterz wrote:

Interested in the helper springs if you split!

Just buy some from Merlin Motorsport, or let me know what you want and i'll ask Curtis.
Those stickers finally went in the post today btw.

Cheers mate ill PM you at some point when ive got the finances/not as busy! Thank you for them mate appreicated, let me know what i owe you!

________________________________________

owain wrote:

A GTI-6 with a good dashboard and the seats down can outsprint an E46 M3 in July.

Post #20

Bump - still available.

Postage with Parcel force comes in at £35.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #21

adam b wrote:

phillipm wrote:

At 125lb/inch it's a perfect setup for my fleabag 700kg 1.4. But tbh it's all semantics anyway, they both do the same thing.

EFA

ROFLZ

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Post #22

£375 delivered? I will pay the Paypal fees though.

Post #23

No thanks.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #24

Bump - Still available.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...

Post #25

Bump - Still available.

________________________________________

200+ secret squirrels hiding under the bonnet with 4 wide mouth frogs...