Would anyone be able to change the cambelt and waterpump, I can also supply parts if pointed in the right direction of what to order?
________________________________________
98 Blaze 6 - Current
|
displaying posts 1 to 9 of 9
Author | Subject: Cambelt / Water Pump Change |
oliverharveyuk@hotmail.co.uk
Regular Location: Banbury Registered: 16 Feb 2016 Posts: 231 Status: Offline |
Post #1
My 6 has done about 120k miles and I don't know when the last cambelt change was.Would anyone be able to change the cambelt and waterpump, I can also supply parts if pointed in the right direction of what to order? ________________________________________ 98 Blaze 6 - Current |
Posted 22nd Feb 2016 at 17:31
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #2
id do it but I'm miles from Banbury ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 22nd Feb 2016 at 18:37
|
mechanical_repairs
Seasoned Pro Location: leicester Registered: 10 Jan 2005 Posts: 12,122 Status: Offline |
Post #3
In Leicester if you get stuck for local garages Carl ________________________________________ C.G.Cars of Leicester, Peugeot/Citroen/Renault specialist Tel: 01162 624498/07799 405184 WWW.CGCARSLEICESTER.CO.UK36 narborough road south, Leicester LE3 2fn MOT station now open, tests £35 with a free retest. Recovery available with a recovery unit, for those not so local jobs Also offer the loan of a free courtesy car 306 dturbo |
Posted 22nd Feb 2016 at 21:30
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #4
Word of advice in your ear bud dont take it to anyone that you dont have reference and experience of doing these engines have seen to many tapping engines after joe bloggs has been at it may be worth the travel Appoligies if your name really is joe bloggs .that would suck would it not ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
Posted 22nd Feb 2016 at 22:15
|
oliverharveyuk@hotmail.co.uk
Regular Location: Banbury Registered: 16 Feb 2016 Posts: 231 Status: Offline |
Post #5
Yeah ideally I would prefer somebody on this forum who has done it before. I don't really have a local mechanic that I use often so imagine this is the best place to look. ________________________________________ 98 Blaze 6 - Current |
Posted 22nd Feb 2016 at 22:57
|
mocinim
Seasoned Pro Location: The Darkside of bedford :) Registered: 09 Jan 2015 Posts: 2,307 Status: Offline |
Post #6
oliverharveyuk@hotmail.co.uk wrote: Yeah ideally I would prefer somebody on this forum who has done it before. I don't really have a local mechanic that I use often so imagine this is the best place to look. Pug1off is about 20mins drive from u bud not cheap but will do the job properly ________________________________________ BLACK RALLYE - phoenixWHITE RALLYE - valliant http://public.servicebox.peugeot.com/ https://www.gov.uk/check-mot-history |
Posted 22nd Feb 2016 at 23:06
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #7
I too would do it but I'm in Kent.As said, these engines have a tendency to tap if someone makes a mistake with the belt - seen it happen way too many times. ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone |
Posted 22nd Feb 2016 at 23:23
|
miles
Seasoned Pro Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #8
At the end of the day it's just a basic XU10 engine as found in loads of things so a good local garage should have no issues, just make sure they don;t use Tipex marks________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
Posted 24th Feb 2016 at 23:50
|
jord294
Seasoned Pro Location: somewhere in north wales Registered: 09 Nov 2009 Posts: 3,110 Status: Offline |
Post #9
I'd offer, but am about 2.5hrs away________________________________________ FRESHLY RE-FURBISHED GTI BEAMSFITTING AND LOWERING AVAILABLE. ALL AXLES BUILT USING GENUINE PEUGEOT PARTS IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE! |
Posted 25th Feb 2016 at 03:08
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.