|
displaying posts 1 to 25 of 32
Pages (2): [1] 2
| Author | Subject: Flat door cards for front & rear |
 Day666
Seasoned Pro  Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #1
After a pattern to make my own or a cheap set of front & rear door cards for my soon to be stripped caged 6 ...There were people selling them for £5 a while back !Would love a set of Carbon ones but Don't want to pay hundreds for Carbon ones ...unless someone has a cheap set lying about ...Fibreglass ones would do as long as they are black ... |
 Posted 17th Jan 2016 at 22:08
|
|
|
6waysforward
Seasoned Pro  Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #2
Finally given in damien?  ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
|
Posted 17th Jan 2016 at 22:09
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,308 Status: Offline |
Post #3
Door card off, wrapping paper or similar and draw your rough outline. Cut out, neaten and mirror for the other side. Lay on sheets and draw around  ________________________________________  |
|
Posted 17th Jan 2016 at 22:15
|
|
|
fatlapit
Seasoned Pro  Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #4
I do have brand new carbon cards i can draw around if u like________________________________________ |
|
Posted 17th Jan 2016 at 22:18
|
|
|
armzsc6
Seasoned Pro  Location: Crowborough Registered: 22 Mar 2008 Posts: 3,445 Status: Offline |
Post #5
dangti6 wrote: Door card off, wrapping paper or similar and draw your rough outline. Cut out, neaten and mirror for the other side. Lay on sheets and draw around This is exactly what I did a couple of years ago. Day you've seen inside my 6 all I did was make cardboard templates of the door and of each side of the rear quarter panel hole and then bought some cheap 1 or 2 mm perspex and cut it to shape then wrapped it in cheap carbon wrap. Attached the rears with tiger seal and the fronts with flat self tapping screws simples. ________________________________________ Black power baby! SUUUUUPERCHARGED Seat Leon FR TDI 190BHP 300lbft daily gti-6 killer :p 12x 306's owned so far Cambelts, clutches, service work carried out on All makes and models, Peugeot Citroen / mitsubishi specialist. Pug planet / Citroen Lexia diagnostics / code reads available. |
|
Posted 17th Jan 2016 at 22:38
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #6
6waysforward wrote: Finally given in damien? Yes Ben ....& I've stripped it inside ....20% track & 10% road & 70% will not be used NOW |
|
Posted 18th Jan 2016 at 09:57
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #7
dangti6 wrote: Door card off, wrapping paper or similar and draw your rough outline. Cut out, neaten and mirror for the other side. Lay on sheets and draw around Sadly Dan ....my cars with Mike Edwards for 10-14days now . I wanted them ready for when it comes back m8 |
|
Posted 18th Jan 2016 at 09:59
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #8
fatlapit wrote: I do have brand new carbon cards i can draw around if u like Chris if you could m8 ? I'll pay you for it & Carraige |
|
Posted 18th Jan 2016 at 10:01
|
|
|
Chr1sch
Seasoned Pro  Location: Worcester Registered: 02 Aug 2014 Posts: 1,025 Status: Offline |
Post #9
What are you planning to do with the electric window switches dude? - this is what's put me off so far... |
|
Posted 18th Jan 2016 at 10:03
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #10
Thanks Pete .Removed another load of weight before my Cage gets welded in ..... Just ordered a Helix clutch & Pressure plate ....my clutch is slipping also ....not good ...I was told to use a stnd Pressure plate .....as I'm not running high BHP ...but I've gone & ordered both Helix now  |
|
Posted 18th Jan 2016 at 10:09
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #11
Chr1sch wrote: What are you planning to do with the electric window switches dude? - this is what's put me off so far... I'm going to make two small pods to mount them on top of the flat door panels ....out of the way of the door Bars etc  |
|
Posted 18th Jan 2016 at 10:12
|
|
|
Twangy
Senior User  Location: heswall Registered: 27 Jun 2014 Posts: 623 Status: Offline |
Post #12
how soon do you need them m8________________________________________ wayne mcardle |
|
Posted 18th Jan 2016 at 10:48
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #13
Twangy wrote: how soon do you need them m8 Two weeks max What you thinking ??? |
|
Posted 18th Jan 2016 at 13:54
|
|
|
Twangy
Senior User Location: heswall Registered: 27 Jun 2014 Posts: 623 Status: Offline |
Post #14
will measure door cards , and see if can get hold of old doudle glazed unit or pain of glass this week ,so can lay up flat panels , have loads of fibreglass with black pigment , also waiting on delivery of 10sq metres of carbon to be delivered damion ________________________________________ wayne mcardle |
|
Posted 18th Jan 2016 at 14:10
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #15
Twangy wrote: will measure door cards , and see if can get hold of old doudle glazed unit or pain of glass this week ,so can lay up flat panels , have loads of fibreglass with black pigment , also waiting on delivery of 10sq metres of carbon to be delivered damion That would be bloody amazing !!!! Fibreglass with Blk pigment sounds great !!! Would love Carbon but not with how much just the material costs Wayne ....let alone the making of it ... Wayne a question Is it possible without loads of work to build into the Blk Fibreglass door panel a Angled pod on each side sort of facing towards each seat for my Electric Windows switch . ..so I don't have to make a MDF one to screw on top ? I've been told all the electric Window / Mirror switches are the same size & shape on the outside ....I'm sure others would love this & I can't go manual because of my door bars in the way ...see see |
|
Posted 18th Jan 2016 at 17:03
|
|
|
fatlapit
Seasoned Pro Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #16
How much do u think the door cards cost out of interest??________________________________________ |
|
Posted 18th Jan 2016 at 16:54
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #17
fatlapit wrote: How much do u think the door cards cost out of interest?? £250-£300 in Carbon ? |
|
Posted 18th Jan 2016 at 16:57
|
|
|
6waysforward
Seasoned Pro Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #18
Could you not use a universal surface mount pod for the window switches damien?Just had a look on ebay, i can only find them in full kits with universal motors etc but you could email them to see if you could buy just the pods.  ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
|
Posted 18th Jan 2016 at 17:10
|
|
|
6waysforward
Seasoned Pro Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #19
I found them but in Australia and postage is terribleclicky Or better yet, get down the scrappy and get the clip on surface mount window switch boxes from a transit  ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
|
Posted 18th Jan 2016 at 17:30
|
|
|
Day666
Seasoned Pro Location: Bristol Registered: 20 Apr 2013 Posts: 5,214 Status: Offline |
Post #20
6waysforward wrote: I found them but in Australia and postage is terrible clicky Or better yet, get down the scrappy and get the clip on surface mount window switch boxes from a transit Brilliant Ben That's the sort of thing I'm thinking of ....it's a great back up plan Ben I ....Wonder if Wayne could be really clever & lay some Humps into the Blk coloured Fibreglass panels so they are all in one to fit the originals ???? |
|
Posted 18th Jan 2016 at 17:45
|
|
|
Chr1sch
Seasoned Pro Location: Worcester Registered: 02 Aug 2014 Posts: 1,025 Status: Offline |
Post #21
i'd be keen on these if they'll take the window switches |
|
Posted 18th Jan 2016 at 18:18
|
|
|
fatlapit
Seasoned Pro Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #22
Ledd than that day bud. And thats for a full set of 4________________________________________ |
|
Posted 18th Jan 2016 at 19:11
|
|
|
Twangy
Senior User Location: heswall Registered: 27 Jun 2014 Posts: 623 Status: Offline |
Post #23
Day666 wrote: fatlapit wrote: How much do u think the door cards cost out of interest?? £250-£300 in Carbon ? are you on drugs damian , because it must be some strong s**t your on mate , carbon delivered will pm tomorow with photo of material ________________________________________ wayne mcardle |
|
Posted 18th Jan 2016 at 19:38
|
|
|
lj_6
Regular  Location: Bristol Registered: 19 Jan 2010 Posts: 246 Status: Offline |
Post #24
http://www.lwsdesign.co.uk/product.php?product_id=30&category_id=42 Half that price ! ________________________________________ Astra burg #365 Garrett Power'99 bodied 6 track project |
|
Posted 18th Jan 2016 at 19:57
|
|
|
fatlapit
Seasoned Pro Location: STOCKSFIELD Registered: 02 Nov 2010 Posts: 3,040 Status: Offline |
Post #25
Aye if they make them for youI got door card set And carbon footwells for 420 delivered ________________________________________ |
|
Posted 18th Jan 2016 at 20:16
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.