➜ advanced search
Add a more detailed reply Start a new thread in the Parts For Sale forum
Home -> Forums -> Parts For Sale -> Race car Bits SC engine, suspensions etc

displaying posts 1 to 19 of 19

Author Subject: Race car Bits SC engine, suspensions etc
Hawkesfire

Regular

Location: Stockton on tees

Registered: 26 Mar 2013

Posts: 180

Status: Offline
Post #1
Hi due to a crash last weekend and a back injury i am breaking my SHB rallycross car so the following bits are for for sale, i can get pictures posted once i can get back to the workshops as currently laid up recovering.


Lynx super high boost Inlet manifold with SC bracket including TB and Ansu 600cc injectors and new fuel pressure reg. £800.00

Rotrex C38- 81 Charger including oil system and inlet filter £1,400.00

Pace Dry sump kit and hoses £1,000.00


PTS 6 speed Gearbox up-rated 1st with drive shafts and LSD diff. £1,200.00

Front Suspension AST with springs 3 way adjustable remote canister (just serviced) £1,800.00

Rear Bilstien group a shocks £120.00


10 litre alloy Fuel tank £40.00



GTI 180 rear beam with discs and hubs £100.00

4 x wheels 17x7 with worn ACB11 Avon tyres £300.00

4 x wheels 15x7 with Avon slicks £300.00

4 x Wheels 15 x 6.5 with cut Avon slicks £150.00

4 x Wheels 15 x 7 with Kuhmos slicks £250.00


OPB floor mounted Pedal bias box cable clutch, dash adjuster and master cylinders £250.00


Peugeot sport 6 speed dog box with b3 or be4 bell housing and Lsd installed £5,000.00

Huge 306 radiator £50.00

clutch 7.25 helix twin plate and Lynx lightened steel flywheel for 306. £750.00

Single wiper motor conversion (fiat uno) £50.00

206 WRC Full body molds set £1,000.00

Electric water pump with controller £100.00

Vibratec engine mounts all 3 off them £100 sold awaiting payment

Open to offers on all above as just need to get it all moved as now i am a racing dad with my daughter moving into the BMW minis and my son doing the Junior swift racing

PM me with questions or offers

Marty

________________________________________

206 Rallycross GTI6 SC SHB 425 BHP clutch eater !!!
Posted 11th Jun 2015 at 16:50
Profile
Day666

Seasoned Pro

Location: Bristol

Registered: 20 Apr 2013

Posts: 5,214

Status: Offline
Post #2
Very sorry to hear this !
I did think you had sold it already ?
Get well soon Thumbs up
Posted 17th May 2015 at 07:52
Profile
RetroPug

Seasoned Pro

Location: Leicestershire

Registered: 15 Jan 2013

Posts: 2,473

Status: Offline
Post #3
Really sorry to hear about your crash and injury, I hope it's not too serious.

________________________________________

61k miles Ph.1 Diablo '6 Project Thread
Posted 17th May 2015 at 08:01
Profile
Hawkesfire

Regular

Location: Stockton on tees

Registered: 26 Mar 2013

Posts: 180

Status: Offline
Post #4
Hi thanks they think I Have a fractured spine so racing days are over 😢😢 time to concentrate on the kids now 👍🏻👍🏻👍🏻

________________________________________

206 Rallycross GTI6 SC SHB 425 BHP clutch eater !!!
Posted 17th May 2015 at 08:02
Profile
pete_rallye

Seasoned Pro

Location: Yorkshire

Registered: 12 Dec 2002

Posts: 5,253

Status: Offline
Post #5
Fractured spine?! Blimey, must've been some crash!

I'll take the 044 pump please! Out if interest how old is the dog box and where did you get it from?

________________________________________

Oulton Park in a BTCC 306 vid 1
Oulton Park in a BTCC 306 vid 2
Lap of the 'ring
Posted 17th May 2015 at 09:07
Profile
Hawkesfire

Regular

Location: Stockton on tees

Registered: 26 Mar 2013

Posts: 180

Status: Offline
Post #6
The dog box was bought from Jam motorsport it's in for a rebuild at the moment as I wanted it checking over (it was not fitted to the car when I had my accident ) I will speak to them to see when it's ready if you Pm me I will forward my bank details and get the lads to take iout the pump of the car this week and ship to you.

When I hit the barrier there was a concrete lip about 2 FT tall that caused the shock damage to my spine

________________________________________

206 Rallycross GTI6 SC SHB 425 BHP clutch eater !!!
Posted 17th May 2015 at 09:38
Profile
aaron6

Seasoned Pro

Location: On the sofa in maidstone

Registered: 16 May 2006

Posts: 5,840

Status: Offline
Post #7
What do you have in the way of a seat mount?
I'm after a bolt in frame to mount some seats too.

________________________________________

See the sheer power and might of the lesser known burrowing owl.



Posted 17th May 2015 at 16:34
Profile
Hawkesfire

Regular

Location: Stockton on tees

Registered: 26 Mar 2013

Posts: 180

Status: Offline
Post #8
sorry the seat and mounts and belts will be destroyed as i would not sell any of these after the crash

Marty

________________________________________

206 Rallycross GTI6 SC SHB 425 BHP clutch eater !!!
Posted 17th May 2015 at 17:19
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline
Post #9
what are the 17" wheels?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 17th May 2015 at 17:20
Profile
aaron6

Seasoned Pro

Location: On the sofa in maidstone

Registered: 16 May 2006

Posts: 5,840

Status: Offline
Post #10
Fair enough.I was only gonna cut them about and modify them for custom fitting some RX8 seats so they'd probably be fine. And cracked welds I would've just ground out and replaced.

________________________________________

See the sheer power and might of the lesser known burrowing owl.



Posted 17th May 2015 at 17:26
Profile
psjunkie

Seasoned Pro

Location: Halifax

Registered: 31 Aug 2007

Posts: 1,565

Status: Offline
Post #11
Price on flywheel if it's fits std 6 gearbox.

Also hope you have a good recovery ! Thumbs up

________________________________________

1997 P1 Gti 6 Charged
Posted 17th May 2015 at 19:18
Profile
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline
Post #12
What wheels are they...?

________________________________________

Nothing to see here
Posted 17th May 2015 at 20:35
Profile
RallyeP6

Regular

Location: West Byfleet

Registered: 11 Jul 2013

Posts: 451

Status: Offline
Post #13
OUCH.. sorry to hear about that, well at least you can keep the racing spirit alive through your kids.
Pics of the 17" wheels would be handy when you are up and about.
Posted 17th May 2015 at 21:48
Profile
Hawkesfire

Regular

Location: Stockton on tees

Registered: 26 Mar 2013

Posts: 180

Status: Offline
Post #14
Hi PSjunkie

The flywheel is a Lync lightweight one but its for a 7" race clutch so will fit the 306 but you will need the clutch to go with it which is a helix twin plate unit it has the ceramic discs not sintered as this gives a little more slip on the start line.

I will get pictures up of all the bits once i can get out of the house.

Marty

________________________________________

206 Rallycross GTI6 SC SHB 425 BHP clutch eater !!!
Posted 18th May 2015 at 06:59
Profile
demondriverdan

Seasoned Pro

Location: Londinium

Registered: 29 Nov 2010

Posts: 2,665

Status: Offline
Post #15
Electric water pump is interesting. Which cambelt did you use with that? You don't have a swirl pot setup available do you?

________________________________________

Rallye Race Car
Posted 18th May 2015 at 11:41
Profile
rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline
Post #16
Any pics of the radiator setup at all?

________________________________________

Just Drive It
Posted 18th May 2015 at 13:43
Profile
SMITANZ

Junior User

Location: Buckingham

Registered: 04 Dec 2013

Posts: 67

Status: Offline
Post #17
Still go hydro handbrake
Posted 18th May 2015 at 22:44
Profile
pete_rallye

Seasoned Pro

Location: Yorkshire

Registered: 12 Dec 2002

Posts: 5,253

Status: Offline
Post #18
can you empty your inbox when you get a chance?

________________________________________

Oulton Park in a BTCC 306 vid 1
Oulton Park in a BTCC 306 vid 2
Lap of the 'ring
Posted 4th Jun 2015 at 18:17
Profile
Hawkesfire

Regular

Location: Stockton on tees

Registered: 26 Mar 2013

Posts: 180

Status: Offline
Post #19
Prices of whats left update and open to offers .....

________________________________________

206 Rallycross GTI6 SC SHB 425 BHP clutch eater !!!
Posted 11th Jun 2015 at 16:54
Profile
Home -> Forums -> Parts For Sale -> Race car Bits SC engine, suspensions etc

All times are GMT. The time is now 03:31

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.