first things first these are NOT jenveys but copies of jenveys. i got them off ebay the other month but I am not going to using them now.

what you get is the following:

2 x 48mm DCOE bodies 118mm in length
4 trumpets
Bosch TPS sensor
fuel rail
lever



more pictures can be found here: http://s261.photobucket.com/user/gcrallying/library/48mm

the injectors in the pictures are not included as they were only used to show how the fuel rail works.

looking for £350 delivered for the lot. if you have any questions or would like further information please ask

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

I am not using them as I have my 45's all setup now ready to go. I'm sure you could get a 48mm Satchell manifold made for them.

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

just had a look at them and they are 48mm all the way through

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

Not really - should be 45s

Was thinking the same myself TBH....



TT

This was one of the last sets I seen on the bay although he does seem to put stuff on in fits n starts!
http://ebay.to/1H9JJMZ

________________________________________

Team Running Engine again!
Team Negative Camber!
My Budget track engine build thread!
Now appearing at a Trackday near you!!

Thanks guys, I was wondering why I couldn't find them. Sleeving them wouldn't be an issue at all. In fact, I've seen them opened out to 48mm for example at filter side and head port side so they're tapered, essentially, sleeving it would do this.

That said, I'd much rather have the proper bodies for the job

________________________________________

Red Rallye - Rolling "restoration"

Wishbone Polybushes available