|
displaying posts 1 to 13 of 13
| Author | Subject: Brand New Omega Pistons - 406 Super Tourer Spec |
 demondriverdan
Seasoned Pro  Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #1
Selling a set of Omega pistons I bought a while ago that I won't be using any more. Brand new in their boxes, never been put in an engine. They come with piston rings also.These are the same as the ones used in the 406 Super Tourer so you know they can handle a fair chunk of power! Looking for £350 inc shipping as I'd like a fast sale. They're about £800 new. Pics to follow ________________________________________ Rallye Race Car |
 Posted 7th Jul 2014 at 08:25
|
|
|
Tarmac terror
Regular  Location: Southampton Registered: 20 Mar 2014 Posts: 458 Status: Offline |
Post #2
What size are these??TT |
|
Posted 7th Jul 2014 at 08:28
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #3
86mm to fit GTi6 engine________________________________________ Rallye Race Car |
|
Posted 7th Jul 2014 at 08:32
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #4
I'm bringing these to Pugfest if anyone is interested in collecting there. Will get pics tomorrow night________________________________________ Rallye Race Car |
|
Posted 8th Jul 2014 at 18:18
|
|
|
eliotrw
Seasoned Pro  Location: Southwark Registered: 18 Jul 2010 Posts: 4,864 Status: Offline |
Post #5
Hold on so they pistons are the same size as standard gti6 ones?________________________________________ Ex- Phase 3 China GTi-6 T-Reg |
|
Posted 8th Jul 2014 at 20:01
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #6
Same bore yes. I believe the height is different though as standard rods do not work. ________________________________________ Rallye Race Car |
|
Posted 8th Jul 2014 at 20:02
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,842 Status: Offline |
Post #7
I was intrigued about these when Alex had them, though specific details were rather sparse, i.e rod length (or crown height) cutout depth and radius and the dome volume (i.e compression ratio)  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 8th Jul 2014 at 20:05
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #8
AFAIK you need to run the 40mm crank for standard rods to work or get custom rods made. If you're using custom rods then you may as well put in the crank from the HDi (I think) to get more capacity.There is very little cut out on them. Dome is fairly concave. Should be picking them up from the garage tomorrow so will take photos then. ________________________________________ Rallye Race Car |
|
Posted 8th Jul 2014 at 20:08
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,842 Status: Offline |
Post #9
but standard rods are 50mm big end, so wont work with the 40mm crank....measuring them would be the best bet  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 8th Jul 2014 at 20:20
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #10
I'm basing it on what Alex told me, I've not really looked in to it ________________________________________ Rallye Race Car |
|
Posted 8th Jul 2014 at 21:13
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #11
Ignore the above about not much cutout!Photos:    ________________________________________ Rallye Race Car |
|
Posted 9th Jul 2014 at 17:23
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #12
Up on ebay now: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=261551930950 ________________________________________ Rallye Race Car |
|
Posted 3rd Aug 2014 at 21:10
|
|
|
demondriverdan
Seasoned Pro Location: Londinium Registered: 29 Nov 2010 Posts: 2,665 Status: Offline |
Post #13
Auction ends tonight if anyone's interested.________________________________________ Rallye Race Car |
|
Posted 10th Aug 2014 at 17:12
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.