➜ advanced search
Add a more detailed reply Start a new thread in the Parts For Sale forum
Home -> Forums -> Parts For Sale -> BREAKING Silver Ph2.5 GTi6 - Somerset

displaying posts 1 to 25 of 48

Pages (2): [1] 2

Author Subject: BREAKING Silver Ph2.5 GTi6 - Somerset
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline
Post #1
I'm breaking a 1999 Ph2.5 Titanium silver GTi6. The car has done a shade under 112k miles.

I shall be attending Pugfest in a couple of weeks and can take parts with me for collection. Delivery on most items is no problem at competitive prices.

All parts are available so just ask if you require something I've not listed. A basic list below.


Engine/Suspension

Engine SOLD
Gearstick SOLD

Gearbox £50
Unlocked ECU for 205/309 use £50
Stainless exhaust system with standard cat attached £100
Rear beam complete minus calipers £100
Air feed snorkel £10
Fuel pump £15
Battery box with ECU lid (no main lid) £10
Battery top clamp £5
Hubs (18mm) complete with ABS sensors. Round BJ holes £40
Crank sensor £10
GTi6 front brake calipers with sliders £45
Standard shocks and springs £20
Inertia switch £5
Fuel pump relay £10
Heater matrix hoses £5
OE wishbones ideal donors for roller bearings £15 pair
Master cylinder £15
Fans and cowling (complete with relays) £20
Steering rack (no ram) £15
Driveshafts with good boots £40 pair
Subframe £15



Panels/exterior:

Cyclones SOLD
Crystal headlights SOLD
Roof strips SOLD

Crystal fogs £25 pair
Frosted fogs £10 pair
Front bumper £40
Rear bumper. Scratched on lower left £10
Wings £10 each
Sideskirts £30 pair
Doors with motors and handles £20 each
Ph3 bonnet £30
Ph 3 Tailgate with wiper motor. Small rust spot £30
Ph3 spoiler (faded) £20
Ph2 spoiler (faded) £10
Grill £10
Hockey sticks £5 pair
Rear lights £10 pair
Front wiper motor £10



Interior

GTi half leather/alcantara interior £25 set
Ph3 door cards £20 pair
Black A/B/C pillar trims £30
Rear quarter cards £20
Carpet £10
Indicator twin optic light/fog stalk £10
Wiper stalk £5
Steering wheel with ph3 airbag in average condition £15
Ph3 stealth parcel shelf with speakers £20
Heater motor £10
Silver centre console and vents £15
Clocks with 112,000 miles £10
Dashboard £10
Handbrake centre console and cubby box and ashtray £5
Steering column cowling £5
Radio control stalk £5
Interior mirror covers £5 pair
Visors £5 pair
Auto windscreen sensor £5
Clock/temp display £5
Heated rear screen/hazard switch £5 pair
Set of seatbelts, complete £10
Door shut looms £10 each


All prices are excluding delivery.

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 27th Jun 2014 at 19:15
    Profile
    sparkie1984

    Seasoned Pro

    Location: hertfordshire

    Registered: 19 Jan 2008

    Posts: 1,312

    Status: Offline
    Post #2
    Do you have the silver gearknob at all mate?

    And are the crystal fogs in good nick?

    ________________________________________

    built on: 15 January 1999 - that's a Friday afternoon car..eek!!! ;o).........sadly missed
    Posted 28th Jun 2014 at 08:14
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #3
    The gear knob is absolutely knackered unfortunately.

    I shall inspect the fogs and message you later on.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 28th Jun 2014 at 08:35
    Profile
    chrissywood1987@gmail.com

    Newbie

    Location: Caversfield

    Registered: 27 Jun 2014

    Posts: 10

    Status: Offline
    Post #4
    I am new to this but what is the difference with ph2 and ph3 spoiler and will ph3 fit ph2?
    Posted 28th Jun 2014 at 09:25
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #5
    The ph2 spoiler goes through the glass whereas the ph3 goes into the tailgate.

    The common option is to bond a ph3 spoiler to a ph2 boot instead of drilling.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 29th Jun 2014 at 13:24
    Profile
    pebbles167

    Seasoned Pro

    Location: Melksham. Wiltshire.

    Registered: 08 Dec 2009

    Posts: 2,516

    Status: Offline
    Post #6
    Got a reasonable condition rad lying about?

    ________________________________________

    2005 Peugeot 206 GTI 180

    2008 BMW K1200R
    Posted 3rd Jul 2014 at 21:54
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #7
    This one had a half decent one on it actually. I shall check it over for you tomorrow. Pugfest collection or do you need it beforehand?

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 3rd Jul 2014 at 22:02
    Profile
    pebbles167

    Seasoned Pro

    Location: Melksham. Wiltshire.

    Registered: 08 Dec 2009

    Posts: 2,516

    Status: Offline
    Post #8
    Er.. better make it beforehand. Puddle of pretty odourless liquid sitting on the driveway could be trouble.

    Will arrange something over the weekend Smile

    ________________________________________

    2005 Peugeot 206 GTI 180

    2008 BMW K1200R
    Posted 4th Jul 2014 at 00:22
    Profile
    Stuwee

    Senior User

    Location: st albans

    Registered: 27 Jun 2007

    Posts: 739

    Status: Offline
    Post #9
    Does the car have black rub strips ?

    Is so what condition?

    ________________________________________

    Ph1 Cossack 6







    Posted 6th Jul 2014 at 10:32
    Profile
    osm2121

    Regular

    Location: Montevideo

    Registered: 02 Nov 2012

    Posts: 229

    Status: Offline
    Post #10
    Interested in Ph3 airbag, it has the chromed lion? And the airfeed snorkle, is the part that goes over the rad into the grill?
    Can you get a shipping quote to Uruguay? And maybe some pics? Thanks
    Posted 6th Jul 2014 at 22:25
    Profile
    Markie

    Junior User

    Location: Porthleven

    Registered: 10 Jan 2014

    Posts: 93

    Status: Offline
    Post #11
    Don't suppose you've got a couple of red 6 badges?
    Posted 6th Jul 2014 at 22:37
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #12
    Apologies for the delay on the above. Started breaking bathrooms alongside vehicles.

    Sparkie1984 - The fogs are in good order. No snapped mounts.

    Stuwee wrote:
    Does the car have black rub strips ?

    Is so what condition?


    It does yes. They are faded to grey and one (NS rear) has some scuffing.

    osm2121 wrote:
    Interested in Ph3 airbag, it has the chromed lion? And the airfeed snorkle, is the part that goes over the rad into the grill?
    Can you get a shipping quote to Uruguay? And maybe some pics? Thanks


    I won't post the airbag abroad.

    The snorkel is the bit that goes over the rad yes. Pic:




    PM me your address and I'll look at a postage price.

    Markie wrote:
    Don't suppose you've got a couple of red 6 badges?


    Have one. I'm sure I have at least another, but wouldn't have a clue where to start looking in afraid.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 16th Jul 2014 at 19:19
    Profile
    asim_pug306

    Senior User

    Location: Bradford

    Registered: 26 Aug 2009

    Posts: 933

    Status: Offline
    Post #13
    What's condition of drivers seat?

    ________________________________________

    '01 Astor Grey GTi6

    '99 Cherry Rallye
    Posted 17th Jul 2014 at 01:51
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #14
    asim_pug306 wrote:
    What's condition of drivers seat?


    Leather good, alcantara not so.

    http://www.306gti6.com/forum/showthread.php?id=160721

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 17th Jul 2014 at 07:57
    Profile
    Nose

    Senior User

    Location: Birmingham

    Registered: 23 Jun 2013

    Posts: 994

    Status: Offline
    Post #15
    Hi Dan, i need a good drivers door lock mechanism if you have one, and also the lower boot trim in between the rear lights if you have a good 'un (mines battered)

    cheers.

    ________________________________________

    Bianca 306 Rallye.
    Mondeo Titanium X.
    Posted 17th Jul 2014 at 13:40
    Profile
    paul.rallye

    Newbie

    Location: Muir Of Ord

    Registered: 07 Feb 2014

    Posts: 18

    Status: Offline
    Post #16
    have you got any pics of the exhaust? what make is it?
    thanks
    Posted 17th Jul 2014 at 15:02
    Profile
    t3ora

    Regular

    Location: England

    Registered: 22 Dec 2009

    Posts: 316

    Status: Offline
    Post #17
    Elec window switch driver side ?

    ________________________________________

    Road/track car coming together slowly
    Posted 17th Jul 2014 at 15:34
    Profile
    asim_pug306

    Senior User

    Location: Bradford

    Registered: 26 Aug 2009

    Posts: 933

    Status: Offline
    Post #18
    dangti6 wrote:
    asim_pug306 wrote:
    What's condition of drivers seat?


    Leather good, alcantara not so.

    http://www.306gti6.com/forum/showthread.php?id=160721


    Which headrests are they? Want to get rid of the puffy type

    ________________________________________

    '01 Astor Grey GTi6

    '99 Cherry Rallye
    Posted 17th Jul 2014 at 22:29
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #19
    Nose wrote:
    Hi Dan, i need a good drivers door lock mechanism if you have one, and also the lower boot trim in between the rear lights if you have a good 'un (mines battered)


    Got both. Shall PM you.

    paul.rallye wrote:
    have you got any pics of the exhaust? what make is it?
    thanks


    Exhaust has gone I'm afraid.

    t3ora wrote:
    Elec window switch driver side ?


    Certainly. Tested and working. Shall PM you.

    asim_pug306 wrote:


    Which headrests are they? Want to get rid of the puffy type


    I'll PM you some photos of them Smile

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 20th Jul 2014 at 15:14
    Profile
    Nose

    Senior User

    Location: Birmingham

    Registered: 23 Jun 2013

    Posts: 994

    Status: Offline
    Post #20
    dangti6 wrote:
    Nose wrote:
    Hi Dan, i need a good drivers door lock mechanism if you have one, and also the lower boot trim in between the rear lights if you have a good 'un (mines battered)


    Got both. Shall PM you.


















    Thanks Dan, pm'd you back bud. Thumbs up

    ________________________________________

    Bianca 306 Rallye.
    Mondeo Titanium X.
    Posted 21st Jul 2014 at 12:08
    Profile
    Nose

    Senior User

    Location: Birmingham

    Registered: 23 Jun 2013

    Posts: 994

    Status: Offline
    Post #21
    Hi Dan, did you get my pm bud?

    cheers

    ________________________________________

    Bianca 306 Rallye.
    Mondeo Titanium X.
    Posted 22nd Jul 2014 at 12:46
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #22
    I did, Paul Smile

    Those bits are still on the car at the moment, so I'll whip them off this evening and give you a posted price.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 22nd Jul 2014 at 13:29
    Profile
    Nose

    Senior User

    Location: Birmingham

    Registered: 23 Jun 2013

    Posts: 994

    Status: Offline
    Post #23
    ok Dan thanks bud, sorry, wasn't chasing you at all.

    cheers.

    ________________________________________

    Bianca 306 Rallye.
    Mondeo Titanium X.
    Posted 22nd Jul 2014 at 22:28
    Profile
    calibra306

    Seasoned Pro

    Location: Gravesend, Kent

    Registered: 06 Nov 2011

    Posts: 1,315

    Status: Offline
    Post #24
    Do.you have drivers window switch please if so whats the number of pins at the connector please?! Need 4 pin only and with electric mirror adjuster

    ________________________________________

    V6 Power!

    Faster I can go the better!

    Its not what you drive, its how you drive that wins the race!
    Posted 22nd Jul 2014 at 23:04
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #25
    T3ora has my payment details for the switch, so it's provisionally unavailable - but it's a 6 pin one so wouldn't be of use to you anyway.

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 23rd Jul 2014 at 19:29
    Profile
    Home -> Forums -> Parts For Sale -> BREAKING Silver Ph2.5 GTi6 - Somerset

    Pages (2): [1] 2

    All times are GMT. The time is now 06:01

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.