Hi guys,

I wanted to run studs and nuts on my C5 rims after fitting the big brakes/spacers so I spent hours trawling the internet trying to find something to do the job that had the spin washers built into them.
I came across these, there for Jap cars but use M12 X 1.25 so same thread as Peugeot.

I have 20 of these in total as there original purpose is for 5 spoke wheels. I have used 8 for the front of my 205 but now I've changed wheels I've ordered a new set of nuts to work with them.

so what you get...

set of 20 nuts. This means 16 normal ones and 4 locker style ones. 8 of the normal ones were fitted to my car and used for one trackday, the rest are brand new.

complete with spin washers which cant fall off, 17mm socket head.



£20 delivered

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Cock. Too late.

Could you put the link up of where you bought them from?

________________________________________

For all your Peugeot needs PugRacing.com
Gti S16 199bhp 164 ft lbs torques!

If he doesn't take them I will

________________________________________

For all your Peugeot needs PugRacing.com
Gti S16 199bhp 164 ft lbs torques!

Yeah afraid so.

I bought them from an eBay shop.

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Don't suppose you have a link from where you got them from?

________________________________________

For all your Peugeot needs PugRacing.com
Gti S16 199bhp 164 ft lbs torques!

That's em

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R