Omega super tourer pistons left - Parts For Sale Forum - Peugeot 306 GTi-6 & Rallye Owners Club

Post #1

Hi, I've been breaking my 205 sprint car, and also having a bit of a clear out. Not too much left now... but I'll stick up what is relevant to you guys.

Motordrive bucket seats, FG, out of date but good condition. EARs 5 point harnesses, in date FIA, only 1 year old and have only done 1 hillclimb and about 4-500 road miles in very clean shell.

KAD 6 pots custom anodised in yellow, with discs and Ferodo DS1.11 pads (pads were £175 alone, not the usual ds2500 or mintex rubbish) - £600, basically brand new. again - 1 hillclimb and 4-500 road miles with no heavy braking.

Also have a set of omega supertourer pistons from a 406 VLR GTi6 engine, brand new old stock with rings and pins.

Post #2

Any details on the spec of the pistons?

________________________________________

Just Drive It

Post #3

86mm supertourer omegas. High gudgeon pin height, very light.

Post #4

Prices required.

________________________________________

Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

Post #5

Thanks, looking for some pistons for my Supercharged engine but dont think they will be suitable sadly :-(

________________________________________

Just Drive It

Post #6

Could be interested in brakes pending prices.

Also, what other little parts have you got left?

________________________________________

Chris
1999 China Gti6 Supercharged Devil

[Fun car] >>Project Thread<<
2000 Bianca 306 Diesel [Work runabout]

Post #7

I'll let the pistons go for cheap, no use to me at the moment, £375 with rings and pins.

"KAD 6 pots custom anodised in yellow, with discs and Ferodo DS1.11 pads (pads were £175 alone, not the usual ds2500 or mintex rubbish) - £600, basically brand new"

price is there, £600. Cant move from that though, everything is priced to sell, they have black diamond drilled and grooved GTi6 discs on, and braided pipes with banjos.

Cheers,

Al

Post #8

Was no prices for the other bits though Thumbs up

________________________________________

Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

Post #9

Oh yeah sorry! Been posted on a few forums so got confused.

Seats & Harnesses are £500... reluctantly. lol.

I think that's it guys, unless anyone wants a 205 rear beam or a 8v trigger wheel lol.

Post #10

Sorry, I read that wrong, thought you were quoting what they were new. I will get back to you on the brakes.

How about the wing mirrors, I quite like them and curious to what they will look like on a 306.

________________________________________

Chris
1999 China Gti6 Supercharged Devil

[Fun car] >>Project Thread<<
2000 Bianca 306 Diesel [Work runabout]

Post #11

cjm_harris wrote:

Brakes would be nice but spent too much money this week... maybe next week Hmm

Chris I have a set of f1 style mirrors a bit similar to this what I bought for the 205 but will be trying them on the 306 when I get time

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Post #12

Well over £1000 new...

mirrors went with the shell, they were racetec convex mirrors, could see more than the standard 205 mirrors.

Post #13

Alex, do 1900 gti wheels fit over the brakes?

________________________________________

www.bridgecraftmotorsport.co.uk

Facebook

Post #14

I have to run 15mm spacers to clear my Kad 6 pots on C5 rims

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Post #15

I've got a 1.9 rim handy and I've got a wheel off mine as I'm measuring up and talking to Revolution today to get my wide front runs sorted. I'll go and trial fit.

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Post #16

WTF Alex! What's next then?

You at Brands this wkend? Saw your dad's entered.

________________________________________

205Parts@uk7.net

Post #17

Cheers rallyeash top man, I think they might require a 3-4mm spacer or something like wilwoods. Sadly my spacers got stolen when everything else did!

A house Baz, such is life! Yeah I'll be there, come and say hello if you're about Smile

Yellow Gp4 escort.

Post #18

as ive been measuring my requirements you will require 40mm spoke clearance on your rims to get these on

This is from measuring from the hub face out to the outer part of the caliper.

ill go and try a 1.9 wheel now. Bit of luck my car lives at work!

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Post #19

1.9 wheels seem to have around 37mm spoke clearance. There close to fitting but will need a few mm spacer im afraid

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Post #20

40mm clearance required

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Post #21

Cheers for doing that Smile

much appreciated.

You can run a 4-5mm spacer and the wheels will still locate happily centred. So they will fit 1.9's. Same as my old wilwoods.

Post #22

yeah they were damn close to fitting TBH.

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Post #23

Are the pro race 1.2s for sale?

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Post #24

Sold sorry. Pretty much just what I have listed that is left. Other than an unknown condition BE1 1.6 box. Cheers, Al

Post #25

Which rods are needed to go with those pistons?