Black Jenveys with throttle linkage/cable,
Inlet manifold,
Pipercross filter/backplate,with very nice air temp sensor bracket ,
FPR with gauge,
Coil pack with leads and bracket to fit Gti6 head,
DTA ECU mapped for a standard Gti6 engine.
Custom made loom I've made up which will be plug and play into a Rallye/Gti6.This loom is the DTA loom attached to a chopped down Gti6 loom which has had all the standard engine/ECU related wiring/plugs removed but retained all plugs/wiring so all your gauges/speedo will still work.
Built into this loom is the power loom for the ECU/coilpacks/fuel pump too,with relays and circuit breakers instead of fuses
Loom was made up to position ECU in standard ECU box,and bracket for relays would be bolted to bulkhead just behind.
Looking for £1200 collected,insured delivery will be about £40
________________________________________
Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........Mac1 ZR R1 kit car build in progress.