|
displaying posts 1 to 25 of 32
Pages (2): [1] 2
| Author | Subject: Throttle bodies favour |
 mr west
Senior User  Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #1
Hi all, really close to ordering my bodies for the Rallye, just a bit hesitant to spend that kind of cash. SO the favour im after is, is anyone on here running bodies and lives in herts or carbs and would be kind enough to take me for a blast in they're pug? So I can see if I really want to spend out on them.thanks Alek ________________________________________ white rallyecherry dead rallye s16 |
 Posted 24th Jun 2013 at 21:20
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #2
whereabouts in herts? are you on the 205 forum, as well? Baz Thorn might have something pug with bodies or carbs on it.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 24th Jun 2013 at 21:22
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,308 Status: Offline |
Post #3
If you like the sound just buy some________________________________________  |
|
Posted 24th Jun 2013 at 21:32
|
|
|
mr west
Senior User Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #4
I love the sound and want the throttle response but ive spent ££££ on cars before modding them inly to find I didn't really like it________________________________________ white rallyecherry dead rallye s16 |
|
Posted 24th Jun 2013 at 21:37
|
|
|
mr west
Senior User Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #5
Na not on the 205wrong forum. Im in Royston but I would drive to meet someone, I wouldnt expect someone to come to me________________________________________ white rallyecherry dead rallye s16 |
|
Posted 24th Jun 2013 at 21:39
|
|
|
bigbadbowen
Seasoned Pro  Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #6
Throttle response is awesome dude and the sound is the muts  |
|
Posted 24th Jun 2013 at 21:40
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #7
+1 for bodies, anyone with throttle bodies as their avatar pic will say they are worth it though  ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 25th Jun 2013 at 00:13
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #8
Ohh yes, that soundtrack!Yet to have my own set running, but have driven a mates 205 gti6 on bodies. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 25th Jun 2013 at 00:21
|
|
|
mr west
Senior User Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #9
Mm think I will take the plunge, its still going to be my daily too________________________________________ white rallyecherry dead rallye s16 |
|
Posted 25th Jun 2013 at 05:42
|
|
|
phil b
Seasoned Pro  Location: Market Drayton Registered: 25 Aug 2006 Posts: 3,090 Status: Offline |
Post #10
I bought mine last yr and car still ain't on road...... Just buy em!!! I can't wait for the bwarpage________________________________________ '97 PH1 'Sigma Blue' 306 GTI 6 project 'Tooters'194.2bhp 127.6 dB '96 PH1 'Black Noir' 306 DTurbo (project in permenant storage) '94 300tdi LR Discovery (project gone dead and buried) '99 td5 LR Discovery 2 (trailer tug and family bus) project 'in the garage getting chassis welded' (again) The 6 can go fast, the disco can go anywhere Built: 9 January 1997 - that's a Thursday Skip Brown cars: tarporley Cheshire Tel: 01829 720492 add me --> philbrindley85@hotmail.com TEAM: Snapper  |
|
Posted 25th Jun 2013 at 08:50
|
|
|
pugjim
Seasoned Pro  Location: Sheffield Registered: 11 Mar 2007 Posts: 1,380 Status: Offline |
Post #11
daveyboy wrote: +1 for bodies, anyone with throttle bodies as their avatar pic will say they are worth it though +1 |
|
Posted 25th Jun 2013 at 11:20
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #12
Case proved  ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 25th Jun 2013 at 11:21
|
|
|
pugjim
Seasoned Pro Location: Sheffield Registered: 11 Mar 2007 Posts: 1,380 Status: Offline |
Post #13
On a standard engine your not going to see much of a gain in power but it will improve throttle response and obviously the induction noise. Add some cams and a good ecu and mapping then there is some bhp to be found. The engine in my avatar had some special piper regrinds, bosch 803 injectors and a bit of port work and produced 215bhp (cant remember the torque figure) on the same rollers it produced 165bhp in standard form. The only issue is the idle on really cold days on initial start up, after about a minute running its fine. |
|
Posted 25th Jun 2013 at 12:31
|
|
|
gman
Seasoned Pro  Location: Didcot Registered: 25 Oct 2007 Posts: 1,471 Status: Offline |
Post #14
What bodies are you going for? I'm seriously tempted, but I would want to run cams as well which can be troublesome on these engines, especially if the heads been skimmed.Don't fancy paying for pocketted pistons! ________________________________________ 1992 Onyx Black 205 GTI-62005 Honda S2000 (Sold) 2002 Audi S3 (Sold) 2005 Clio 182 Trophy (sold) |
|
Posted 25th Jun 2013 at 14:23
|
|
|
arigti6
Seasoned Pro  Location: Wiltshire Registered: 24 Jan 2010 Posts: 2,365 Status: Offline |
Post #15
A mate has a Clio 16v (Williams engine) bored out to 2.1 On ITBs does sound EPIC! ________________________________________ I Live for the 306 TEAM CHERRY PINK RALLYE 2008 BMW ///M 320d |
|
Posted 25th Jun 2013 at 14:45
|
|
|
mr west
Senior User Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #16
Yeah If I go for them I. Also fitting cat cams and all mapped in. I know not to expect big power im no stranger to engine mods both n/a and turbo. Just wanted to go in a 306six with them first to see hear feel if I really want to do it________________________________________ white rallyecherry dead rallye s16 |
|
Posted 25th Jun 2013 at 14:45
|
|
|
mr west
Senior User Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #17
come on then you lot, where's the video links to convince me?________________________________________ white rallyecherry dead rallye s16 |
|
Posted 25th Jun 2013 at 16:13
|
|
|
prism7guy
Seasoned Pro  Location: DoncastAAAAARGH Registered: 13 Jan 2008 Posts: 4,640 Status: Offline |
Post #18
https://www.youtube.com/watch?v=II0iHr0qKtE Dan has 'bodies on his 205 gti6, it sounds epic and i'm now thinking of fitting bodies to mine for the time being. ________________________________________ Goldie the track car. |
|
Posted 25th Jun 2013 at 17:26
|
|
|
gti6girl
Seasoned Pro  Location: Dartford Registered: 19 Feb 2007 Posts: 2,692 Status: Offline |
|
|
Posted 25th Jun 2013 at 17:42
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #20
One of Sandy's best 1998 cc XU'shttp://youtu.be/oLbNUHDbcTs http://youtu.be/ICuCiPVDhjM ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 25th Jun 2013 at 18:14
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #21
Sandy mapping a 1.9 MIhttp://youtu.be/7X4FTERY_VE ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 25th Jun 2013 at 18:16
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #22
2.2 MI.http://youtu.be/jm7_aczh4IM ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 25th Jun 2013 at 18:19
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,847 Status: Offline |
Post #23
2.3 MI16http://youtu.be/XQKSrdmEzwc ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 25th Jun 2013 at 18:20
|
|
|
mr west
Senior User Location: herts Registered: 13 Sep 2010 Posts: 742 Status: Offline |
Post #24
unfortunetly this is now a wasted thread as I was going to borrow a bit pay for them, but alas ive just been declined. might just whack cams in on they're own or just keep saving for now ________________________________________ white rallyecherry dead rallye s16 |
|
Posted 25th Jun 2013 at 18:47
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #25
If you're fitting bodies, it's compulsory to fit some extra revs*Clicky *Available in all good Halford stores. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 25th Jun 2013 at 22:09
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2025 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.