Post #1
Hi I've decided to go the throttle body route, Which ecu shoul I use ?
|
displaying posts 1 to 25 of 28
Pages (2): [1] 2
| Author | Subject: What standalone ecu |
 markylee
Regular  Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
|
 Posted 8th Apr 2013 at 20:48
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #2
Whichever your preferred mapper recommends is usually the way to go. For instance Dave Walker won't do anything other than Emerald (it's his ECU though) whereas lots of guys don't like Emerald much.Most are more than happy to work with Omex or DTA, DTA has a very good reputation and is considered by many to be superior to Omex, depending which model of ECU you buy. If you don't need lots of unnecessary frills like anti-lag and flat shift you can get by with the base model from most manufacturers. ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 8th Apr 2013 at 20:58
|
|
|
dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #3
As above, find a mapper you want to use and take their advice. You really want to be using the brand they prefer the software behind.I use an entry DTA S40 Pro. Still has many features I can't make use of in my 205. ________________________________________  |
|
Posted 8th Apr 2013 at 21:00
|
|
|
markylee
Regular Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
Post #4
Cheers guys, and do I definately need this, can I not just use a standard ecu |
|
Posted 8th Apr 2013 at 21:06
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #5
You can use the standard ECU, the drawback is that there seems to be only one place in the UK that's able to map the standard ECU (well there will be others that claim they can, but none with Wayne's proven track record) and that's Chip Wizards in Rotherham. I haven't looked where you are based but for many he's a trip to far. The other drawback with mapping the standard ECU is that you are pretty much locked into going back to Wayne for every modification you do that entails a map tweak (updating cams a few months after fitting bodies perhaps) so think carefully about what your future plans will be and do the lot at the same time.Last I heard a Chip Wizards map was £400 and you need to budget for fuel and travel expenses too. Thsts if you can wait for Wayne to fit you in as his waiting list is usually pretty long. ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 8th Apr 2013 at 21:14
|
|
|
markylee
Regular Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
Post #6
daveyboy wrote: cheers mate i'll look into that, Trying to save the pennies where I can at the moment You can use the standard ECU, the drawback is that there seems to be only one place in the UK that's able to map the standard ECU (well there will be others that claim they can, but none with Wayne's proven track record) and that's Chip Wizards in Rotherham. I haven't looked where you are based but for many he's a trip to far. The other drawback with mapping the standard ECU is that you are pretty much locked into going back to Wayne for every modification you do that entails a map tweak (updating cams a few months after fitting bodies perhaps) so think carefully about what your future plans will be and do the lot at the same time. Last I heard a Chip Wizards map was £400 and you need to budget for fuel and travel expenses too. Thsts if you can wait for Wayne to fit you in as his waiting list is usually pretty long. |
|
Posted 8th Apr 2013 at 21:16
|
|
|
JWP EFi
Turbo Legend!  Location: edinburgh Registered: 07 Mar 2010 Posts: 2,163 Status: Offline |
Post #7
i'm looking to down the tuned n/a route, for me to travel from Edinburgh to Waynes and back plus how ever much fuel the car will consume on the dyno, i'd be looking at a couple of hundred quid plus the actual mapping costs of 400, then as daveyboy says, you would have to go back to wayne for future map revisions. You may as well go Omex, DTA or something. |
|
Posted 8th Apr 2013 at 21:31
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #8
Rotherham? He must have moved  ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 8th Apr 2013 at 21:35
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #9
Rochester then! Can't get away with anything on this forum, just ask Stan!________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 8th Apr 2013 at 21:48
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #10
http://en.wikipedia.org/wiki/Rochester,_Kent________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 8th Apr 2013 at 22:00
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #11
http://en.wikipedia.org/wiki/Rochdale ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 8th Apr 2013 at 22:02
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #12
 ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 8th Apr 2013 at 22:03
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #13
Do one, bastids ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 8th Apr 2013 at 22:28
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #14
Sorry Dave.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 8th Apr 2013 at 22:39
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #15
daveyboy wrote: Rochester then! Can't get away with anything on this forum, just ask Stan! Explain please... ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone  |
|
Posted 8th Apr 2013 at 22:59
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #16
 ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 8th Apr 2013 at 23:18
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #17
stan_306gti6 wrote: daveyboy wrote: Rochester then! Can't get away with anything on this forum, just ask Stan! Explain please... Somebody is always watching... ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 8th Apr 2013 at 23:31
|
|
|
markylee
Regular Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
Post #18
Hi has anybody got a contact no. for wayne as rochester isnt that far from me |
|
Posted 9th Apr 2013 at 08:19
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #19
Welshpug is his secretary, drop him a PM, I'm sure he'll have his details ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 9th Apr 2013 at 08:26
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #20
. Read the thread, then google chipwizards________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 9th Apr 2013 at 08:35
|
|
|
markylee
Regular Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
Post #21
welshpug! wrote: Done that and it looks like the website's down, hence why I asked for a contact no. lmao. Read the thread, then google chipwizards |
|
Posted 9th Apr 2013 at 08:41
|
|
|
daveyboy
aka Jim Davey Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #22
Meeooww!! ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 9th Apr 2013 at 08:41
|
|
|
markylee
Regular Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
Post #23
Too early for me, I'm grouchy this early |
|
Posted 9th Apr 2013 at 08:51
|
|
|
coskev
Seasoned Pro  Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline |
Post #24
Theres a thread on north west remap, ask the op for waynes number as he mapped his car on monday He was based in Rochdale, not Rochester  but now apparently works out of Warrington, cheshire ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........Mac1 ZR R1 kit car build in progress. |
|
Posted 9th Apr 2013 at 08:55
|
|
|
markylee
Regular Location: benfleet Registered: 05 Jan 2011 Posts: 393 Status: Offline |
Post #25
coskev wrote: Cheers mate, very helpful Theres a thread on north west remap, ask the op for waynes number as he mapped his car on monday He was based in Rochdale, not Rochester but now apparently works out of Warrington, cheshire |
|
Posted 9th Apr 2013 at 09:01
|
|
Pages (2): [1] 2
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.