displaying posts 1 to 14 of 14

Author Subject: Breaking Diablo S16.
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #1
Breaking a Diablo S16 for parts, as it's too far gone to save - serious lacquer peel on most of the car.
It's completely standard apart from the exhaust, been stood for about 4 years due to starting issues, until we got it last year, after ripping a dodgy alarm system out it fired straight up and ran well, but has just been stood since.

Most parts have been tested and are working unless stated, just ask if unsure.

Prices include recorded delivery, hence the prices on small items.
Anything stated collection only due to size/weight maybe posted at buyers cost/risk, PM me to arrange it, otherwise collection is from Rotherham at the junction of the M18/M1 area.

Parts not available/already gone:
Beam
Passenger side skirt
Passenger Wing
Interior

Parts available but have serious lacquer peel:
Boot Lid £10
Bonnet £10
Rear Bumper £10
Doors (Bare) £5 each

Window regulators, full working order and tested before removal, £25 each including post.


Genuine Valeo radiator will fit Gti-6/S-16/Xsi/Dtub.
Damn near new as it was fitted just prior to being off the road, hence not a single bent fin:
£35 Collected


Boot Popper:
£6 posted


Drivers Wing (needs a good polish up but otherwise good)
£15 collected


Gti-6/S-16/Xsi/Dtub Front bumper, minus fogs, has some marks near toe eye that would need touching up and a polish over.
£25 Collected









Front grill with hockey sticks and badge. The badge hinge is broke and one of the hockey stick wing clips is broke but included
£20 posted


Electric mirror blanks
£7.50 posted


Electric mirrors, UNTESTED, and needs cleaning up:
£20 Collected



Colour coded door handles, bolt on version, bolts included
£15 posted


Vents
£7.50 posted each


Various switches/relays
£2


Bitron unit bolted to drivers door.
£7.50 posted


Passenger door loom, pins have some corrosion, would need a quick cleanup:
£15 Collected


Driver door loom, good clean pins:
£15 Collected


Window Guides
£12.50 posted each



Door handles
£7.50 Posted


Roof Console c/l Receiver untested but no sign of water damage
£12.50 Posted


Leather steering wheel perfect condition:
£35 collected



Clocks/Dials 100102miles
£25 Posted


Boot Trim, bit scuffed:
£20 Posted


Rear bumper top half suffering from lacquer peel
£10 collected




S16 engine, comes with alternator and PAS pump, been stood but did fire straight up, will obviously need belts doing though:
£100 collected.



Genuine Pug S16 coil packs, £30 posted:



S16 airbox and resonator, no corrosion, £25 posted:


ABS pump, £25 posted:


S16 wiring loom, no wires cut, £30 posted:


If possible please post in the thread rather than PM's, helps me keep track across the forums then. Just ask if there's something else you need.
Plus my PM box is damn near full LOL

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 20th Feb 2013 at 16:50
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline

Post #2
did you copy and past someone else's for sale thingy?

interested in headlamps

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 20th Feb 2013 at 17:46
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #3
Sort of, Jenks gives us a hand with buggy these days so he's been stripping the S16 down too, easier to get hold of him since he's sorting out stripping it on the other sites, I just cross-posted it on here in case anyone wants any parts from it before we destroy what's left LOL

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 20th Feb 2013 at 18:10
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline

Post #4
should have known the S16 rad only fits the S16 and early 8v xsi's Wink

are the seats good too?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 20th Feb 2013 at 18:19
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #5
He's had the interior/seats already, sorry Big grin

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 20th Feb 2013 at 18:22
ablister

Senior User

Location: fife

Registered: 30 Oct 2005

Posts: 522

Status: Offline

Post #6
Hi,

does the engine come with sensors attached? I'm after the oil pressure sender for the gauge if it it's available. Also needing the VSS in the diff if it has dual electric connection for the ecu and speedo cable input.

Cheers

________________________________________

306 rallye, Richard Longman engine

rc10gt
Posted 20th Feb 2013 at 20:27
tarret

Regular

Location: Maidstone

Registered: 27 Sep 2009

Posts: 323

Status: Offline

Post #7
Hi what's the millage on the engine?
Posted 21st Feb 2013 at 09:43
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #8
~100k, same as the clocks, it's the original motor.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 21st Feb 2013 at 14:33
aaron6

Seasoned Pro

Location: On the sofa in maidstone

Registered: 16 May 2006

Posts: 5,840

Status: Offline

Post #9
Do it dean!!!

________________________________________

See the sheer power and might of the lesser known burrowing owl.



Posted 21st Feb 2013 at 15:06
tarret

Regular

Location: Maidstone

Registered: 27 Sep 2009

Posts: 323

Status: Offline

Post #10
Tempered Aaron lol but still dunno lol
Posted 21st Feb 2013 at 15:52
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline

Post #11
if engine is still available 2nd week of march then i would have it, i would have to arrange courier if you

were willing to stick it on a pallet??
Posted 21st Feb 2013 at 19:49
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #12
It looks like tarret is having it atm, but I#ll let you know if it falls through. Sure I can find a pallet somewhere. Smile

Front calipers/discs/pads are available to those that asked, but I haven't got pics, I'll take some at the weekend.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 21st Feb 2013 at 21:17
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline

Post #13
keep me posted mate.
Posted 21st Feb 2013 at 21:42
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #14
Engine prov. sold Smile

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 21st Feb 2013 at 22:45

All times are GMT. The time is now 17:42

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.