➜ advanced search
Add a more detailed reply Start a new thread in the Engines forum
Home -> Forums -> Engines -> D8 3.0l V6 Engine

displaying posts 1 to 25 of 49

Pages (2): [1] 2

Author Subject: D8 3.0l V6 Engine
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #1
As you all know i am running a D8 V6 engine in my 306. Not a lot info on these to be honest as to modifying, all i can ever seem to find is to get a good exhaust on it, de-cat, filter and remap what should see around 230bhp.
I have herd of Clio V6 cams fitting too what is suppose to make a decent difference but then also read they dont fit. Its hard to find any info as 1 website says something works and others say they dont Dunno

Been looking into maybe some head work and re-profiled cams. Engine will be coming out next week as i have the clutch to do so may as well look into maybe doing a little engine work at the same time.

Any help with these engine would be much appreciated Thumbs up

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 22:27
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #2
surely reprofiled cams along with a map should see a gain, youve got 4 cams to profile, i think piper

want 120 plus vat per cam for the 6 so could be very expensive for the gain you might get

Posted 17th Jan 2013 at 22:31
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #3
Thats the thing like, other thing is anything i do is going to be trail and error really as there is not alot of info on these engine. Only upgrade i can find is the DP Engineering turbo kit what will cost around £3500+

Handling side of things is pretty much sorted now so time to move onto performance now Cool

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 22:37
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #4
you could just ditch the 6 pot and 'charge it lol, be cheaper (so long as you can find 2nd hand kit)

than delving into the unknown....
Posted 17th Jan 2013 at 22:40
Profile
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline
Post #5
I remember having a quick google and could find f all aswell.
I would do the decat and exhaust stuff.
Also may be worth finding a way of using a filter that isnt exposed to heat.
Maybe an enclosed cone like a k and n apollo?

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 17th Jan 2013 at 22:44
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #6
he's got a CDA
Posted 17th Jan 2013 at 22:48
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #7
Already have decat, straight through stainless middle section into scorpion backbox and BMC CDA carbon air filter.

Just bought spare heads too in case i decide to get some head work done. Thought i may as well buy some instead of getting mine done so i have the best of both worlds. Thing is for the likes of a stage 3 head i will be looking at around £400 each... and there is 2 of them Crazy then i would have 4 cams to have re-profiled so theres another £400+ then would be looking at £450ish for a custom map so all in all were talking £1600

What would a 2nd hand charger kit cost? Sure there would be a way to plumb the gti6 charger kit into the V6 engine Whistle

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 22:54
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #8
there probably is mate, but the rotrexed 6 is well n truly tried and tested, you dont need me to tell

you that lol, if your hell bent on tuning a V6 then it would be good to see
Posted 17th Jan 2013 at 22:58
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline
Post #9
f**k this "stage3" talk off, just get someone who knows what they'e doing to do them Wink

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 17th Jan 2013 at 22:59
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #10
welshpug! wrote:
f**k this "stage3" talk off, just get someone who knows what they'e doing to do them Wink


Any recommendations? Cant go wrong with 2 v6 heads for £35 LOL

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 23:01
Profile
bigbadbowen

Seasoned Pro

Location: Winchester

Registered: 21 Nov 2003

Posts: 13,753

Status: Offline
Post #11
Twin chargers dude Thumbs up
Posted 17th Jan 2013 at 23:03
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline
Post #12
eddy_gti6 wrote:
welshpug! wrote:
f**k this "stage3" talk off, just get someone who knows what they'e doing to do them Wink


Any recommendations? Cant go wrong with 2 v6 heads for £35 LOL



not offhand, you'd need to speak to a few, but all that "stages" talk screams HiFail... there really isn't any stage, its either port it properly or don't port at all.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 17th Jan 2013 at 23:06
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #13
hiflowheads do a 'budget stage 5' job hahahaha

dont!
Posted 17th Jan 2013 at 23:10
Profile
eliotrw

Seasoned Pro

Location: Southwark

Registered: 18 Jul 2010

Posts: 4,864

Status: Offline
Post #14
yeah ive never got when people sell stuff as stages?
It sounds a bit juvenile and reminds me of need of speed underground LOL
Its also weird because it implies theres pre set levels of tuning for all cars or something...

________________________________________

Ex- Phase 3 China GTi-6 T-Reg
Posted 17th Jan 2013 at 23:16
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #15
I was looking at somewhere when i had the saxo, Cant remember the name of the place but thats where i got the £400 from. Would it benefit it much if i just polish the ports so there smooth then just open up the inlet and exhaust manis to suit the head?

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 23:18
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #16
from what ive learned, then crack on with exhaust ports (dont open them up tho) but watch what

your doing with inlets, i dont know much about this but theres plenty info out there on this
Posted 17th Jan 2013 at 23:20
Profile
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline
Post #17
It's easier to give customers a certain level at a certain price. Hence a stage 5 GTR locally being 750bhp.

Eddy, stop f**king about with it. Ditch the restrictions in the manifolds and concentrate on making the weight bias further to the rear. Remap is possible, cams are too but very expensive. Tbh you'd be better going d9 on a DTA than cams on a d8. Be cheaper and they are a lot more powerful.

________________________________________

Nothing to see here
Posted 17th Jan 2013 at 23:22
Profile
adam b

Seasoned Pro

Location: The Nam

Registered: 24 Jan 2006

Posts: 12,828

Status: Offline
Post #18
Exhaust manifolds are double skinned and tiny in the downpipes.

________________________________________

Nothing to see here
Posted 17th Jan 2013 at 23:23
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #19
May get onto Daver6, he works at aston martin and has access to plenty of tools as they rebuild and machine all the engines they get in so am sure he would be able to sort me something out with the heads for a good price

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 23:24
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #20
adam b wrote:
Ditch the restrictions in the manifolds and concentrate on making the weight bias further to the rear


Explain please? What restrictions and how do i improve them? As for weight there is not a lot more i can do up front and nowhere i can go with my engine as it has already been lifted 15mm, Battery is in the back. The car is now off the road and will be getting stripped and 2 buckets. Plenty more weight saving to be done here and there but will all come in good time

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 23:29
Profile
JWP EFi

Turbo Legend!

Location: edinburgh

Registered: 07 Mar 2010

Posts: 2,163

Status: Offline
Post #21
are the ES9J4 cam pullies not adjustable?
Posted 17th Jan 2013 at 23:29
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #22
I have no idea?

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 17th Jan 2013 at 23:34
Profile
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline
Post #23
yes, all 4 are.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 17th Jan 2013 at 23:48
Profile
phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline
Post #24
I can do you a Stage 52* pair of heads for the bargain exchange price of a tenner.



*That's the number of seconds I'll spend looking at it.

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
Posted 17th Jan 2013 at 23:55
Profile
eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline
Post #25
Is that including postage? LOL

________________________________________


Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 18th Jan 2013 at 17:56
Profile
Home -> Forums -> Engines -> D8 3.0l V6 Engine

Pages (2): [1] 2

All times are GMT. The time is now 17:06

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.