|
displaying posts 1 to 10 of 10
| Author | Subject: oz fitment |
 6waysforward
Seasoned Pro  Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #1
Just got a set of superleggeras and need some spacers as they are et42.I cant find any genuine oz one's anywhere. Apparently the company that made them went bust  so can anyone recommend me a set as there are some really s**t ones out there.I take i need 4, or can i get away with rears only etc?? ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
 Posted 17th Oct 2012 at 19:14
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,769 Status: Offline |
Post #2
You will need 24mm spacers ideally to take the offset to ET18 on all four wheels.  ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone  |
|
Posted 17th Oct 2012 at 22:13
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline |
Post #3
depends how wide they are, if they are 7" you need lower than 18 which means even bigger spacers, IIRC the Speedline 1508's on the btcc cars that adam had on his 306 for a while were ET8.tallest offset I have fitted to a pug on trailing arms was ET28 6.5" wide, but it does vary. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 17th Oct 2012 at 22:40
|
|
|
6waysforward
Seasoned Pro Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #4
Thats great thanks.Does anyone know the center bore size on the superleggeras?? Just trying to find some spacers now. Or will the size be stamped into the wheel?? ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
|
Posted 18th Oct 2012 at 11:52
|
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,769 Status: Offline |
Post #5
I'm not sure of the centre bore size off the top of my head. Can you not measure it seeing as you already have the wheels?  ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone |
|
Posted 18th Oct 2012 at 16:20
|
|
|
6waysforward
Seasoned Pro Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #6
Slight issue. Center bore is 63.3 and they are a 7 inch rim. so i would need 25-28mm spacers thats goes from a 65.1 to a 63.3. Thats going to be difficult.I can only find 20mm ones. ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
|
Posted 20th Oct 2012 at 17:42
|
|
|
silky
Seasoned Pro  Location: Chelmsford, Essex Registered: 29 Dec 2002 Posts: 3,471 Status: Offline |
Post #7
Could you not sell them on and wait for something in the right fitment? |
|
Posted 20th Oct 2012 at 17:51
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline |
Post #8
get on ebay NOW, there's a set of 6x15 MO's ET19, £270 with Eagle F1's.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 20th Oct 2012 at 17:57
|
|
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,769 Status: Offline |
Post #9
Try giving these guys a try. I got my spacers for my OZ's from here and they were 26mm. ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone |
|
Posted 20th Oct 2012 at 18:00
|
|
|
6waysforward
Seasoned Pro Location: Benfleet essex Registered: 30 Oct 2005 Posts: 3,168 Status: Offline |
Post #10
I am thinking about it silky  Really want superleggera's though mei  Thanks stan, i will try them. ________________________________________ ***Breaking*** Ph3 Silver GTI 6 High Boost |
|
Posted 20th Oct 2012 at 19:49
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)