➜ advanced search
Add a more detailed reply Start a new thread in the Wheels / Tyres forum
Home -> Forums -> Wheels / Tyres -> Rounded wheel bolt

displaying posts 1 to 24 of 24

Author Subject: Rounded wheel bolt
davewagon

Senior User

Location: Corby / Northampton

Registered: 21 Feb 2007

Posts: 889

Status: Offline
Post #1
Well my locking wheel nut is not round and completely stripped and the wheel bolt is seemingly made of chocolate.

(Part of the reason why I cant' go to pugfest!)

Soooo how do i get it off?

Do i smack on a tight fitting nut and then try to crack it off?

If so, what size would anyone recommend? 18mm?

(am I better off buying a single socket from halfrauds to do the job(not have to worry about damaging my own socket then)

________________________________________

Team: Moonstone GTI-6™
Team: Working air-con™

ian7675 wrote:
Remember....a 6 isn't just a car, it's a part time job Thumbs up
Posted 1st Jul 2012 at 11:39
Profile
chris with a pug

Seasoned Pro

Location: Southampton

Registered: 16 Feb 2003

Posts: 5,366

Status: Offline
Post #2
Yeah try that, what kind of bolt is it?

You could try your local back street motor factors, some sell the proper tool for it, about a tenner I think.
Posted 1st Jul 2012 at 11:49
Profile
davewagon

Senior User

Location: Corby / Northampton

Registered: 21 Feb 2007

Posts: 889

Status: Offline
Post #3
Its just the standard Peugeot locking bolt (i.e. crap) for cyclones.

Will give it a go then

________________________________________

Team: Moonstone GTI-6™
Team: Working air-con™

ian7675 wrote:
Remember....a 6 isn't just a car, it's a part time job Thumbs up
Posted 1st Jul 2012 at 11:52
Profile
midlife

Seasoned Pro

Location: Colne, Lancashire

Registered: 13 Mar 2006

Posts: 7,544

Status: Offline
Post #4
I had this problem, drill a 5mm hole through the head down into the threaded part of the bolt, follow this down carefully with a 12mm drill, when you get to the correct depth the head should drop off.
Good luckThumbs up

Cool

________________________________________

Get used to seeing the yellow one !!!MehMehMehMehMeh
Team 330™Cool
Team "no front end or engine"
Team "LIMITED EDITION" I live for the 306 stickerSmug
Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engineSmug
203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine
Posted 1st Jul 2012 at 12:01
Profile
davewagon

Senior User

Location: Corby / Northampton

Registered: 21 Feb 2007

Posts: 889

Status: Offline
Post #5
midlife wrote:
I had this problem, drill a 5mm hole through the head down into the threaded part of the bolt, follow this down carefully with a 12mm drill, when you get to the correct depth the head should drop off.
Good luckThumbs up

Cool


Bloody hell, that sounds a bit involved for me (in my current hungover state)

Will try busting it off first, then attempt this

Cheers, Dave

________________________________________

Team: Moonstone GTI-6™
Team: Working air-con™

ian7675 wrote:
Remember....a 6 isn't just a car, it's a part time job Thumbs up
Posted 1st Jul 2012 at 12:46
Profile
smegal

Seasoned Pro

Location: Leeds

Registered: 26 Dec 2005

Posts: 5,940

Status: Offline
Post #6
Just twat a 12 point socket on the round part then crack it off

________________________________________

Ex SC-6

Now in a Megane R26
Posted 1st Jul 2012 at 16:02
Profile
davewagon

Senior User

Location: Corby / Northampton

Registered: 21 Feb 2007

Posts: 889

Status: Offline
Post #7
Yeah I just been trying this

I can only seem to get an 18mm 12 point socket on, but it is slipping when i try to undo it.

Cant get a 17mm on, so what now?

I have socket to remove rounded bolts, but need an impact wrench/gun really

Not sure I want to try drilling down it

________________________________________

Team: Moonstone GTI-6™
Team: Working air-con™

ian7675 wrote:
Remember....a 6 isn't just a car, it's a part time job Thumbs up
Posted 1st Jul 2012 at 16:36
Profile
T400 PUG Banned!

Location: Burnley

Registered: 01 Jan 1970

Posts: 641

Status: Offline
Post #8
i did some by drilling a 6 or 8 mm hole down a cm or so smacking a slightly bigger torx socket into it and then undo as usual.
Posted 1st Jul 2012 at 16:39
Profile
fatlapit

Seasoned Pro

Location: STOCKSFIELD

Registered: 02 Nov 2010

Posts: 3,040

Status: Offline
Post #9
Irwin bolt grips mate thats wat u need

________________________________________


Posted 1st Jul 2012 at 17:14
Profile
tvrfan007

Seasoned Pro

Location: In the garage

Registered: 29 May 2005

Posts: 3,488

Status: Offline
Post #10
Twat an 11/16" 12 sider on if you can't get a 17 on. Yes

I got some over-torqued lockers off like that, the gay round ones.

________________________________________

I'm Si btw Tee hee

Night Blue VW Golf GTD
Bianca LBSC Rallye - Track/Road Slag Project Thread
Sparkling Silver Mini Cooper D - Super Dooper Superman - (The other half's wheels)
Posted 1st Jul 2012 at 19:00
Profile
barnettjd77

Regular

Location: dorchester

Registered: 12 Nov 2011

Posts: 483

Status: Offline
Post #11
fatlapit wrote:
Irwin bolt grips mate thats wat u need


They are the thing for a job like this!Thumbs up
had to do 3 myself.LOL

________________________________________

A red rallye in progress!
Posted 1st Jul 2012 at 19:44
Profile
smegal

Seasoned Pro

Location: Leeds

Registered: 26 Dec 2005

Posts: 5,940

Status: Offline
Post #12

________________________________________

Ex SC-6

Now in a Megane R26
Posted 1st Jul 2012 at 22:42
Profile
calibra306

Seasoned Pro

Location: Gravesend, Kent

Registered: 06 Nov 2011

Posts: 1,315

Status: Offline
Post #13
I used a solid chisle and punch on mine!

used the chisle which with a few wacks loosened them leaving a big chunk in the nut and then used the punch in the holes to wack is round until it was loose enough to remove with pliers etc.

All but one was a real pain in the ass due to me making sure they were just a little tight when the wheels were last off as i could see the pins starting to go!

________________________________________

V6 Power!

Faster I can go the better!

Its not what you drive, its how you drive that wins the race!
Posted 1st Jul 2012 at 22:51
Profile
daver6

Seasoned Pro

Location: Durham

Registered: 08 Aug 2010

Posts: 2,379

Status: Offline
Post #14
In the past, I've had to weld a nut onto the bolt and remove it that way.

The locking nuts must be made of cheese

________________________________________

Red Rallye - Rolling "restoration"

Wishbone Polybushes available
Posted 1st Jul 2012 at 22:53
Profile
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline
Post #15
Use an Irwin bolt remover as suggested. Is actually quicker than if you had the key.

One of those things you'd rarely use, but when you need something like it they are worth their weight in gold. Anyone that doesn't have a set, buy them for the back of the cupboard. £20 well spent.

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 1st Jul 2012 at 23:05
    Profile
    30ASTOR6

    Regular

    Location: shrewsbury

    Registered: 19 Mar 2012

    Posts: 317

    Status: Offline
    Post #16
    dangti6 wrote:
    Use an Irwin bolt remover as suggested. Is actually quicker than if you had the key.

    One of those things you'd rarely use, but when you need something like it they are worth their weight in gold. Anyone that doesn't have a set, buy them for the back of the cupboard. £20 well spent.


    this is true being a mechanic i brought snap on ones they are deffo best tool i brought get out of s**t loads sometimes the nut doesn't even look like a nut anymore but as if by magic they come undone!
    When i brought my gti6 of andy i couldn't find locking wheel nut socket so whacked them out with extractor socket took 2 mins then when i was cleaning out boot found it tucked inside rear of boot! Doh

    ________________________________________

    TEAM ASTOR GTi 6

    SNAP-ON SUBARU

    SOON NOT TO BE TEAM DIABLO MEREDIAN (for sale)
    Posted 2nd Jul 2012 at 07:14
    Profile
    davewagon

    Senior User

    Location: Corby / Northampton

    Registered: 21 Feb 2007

    Posts: 889

    Status: Offline
    Post #17
    fatlapit wrote:
    Irwin bolt grips mate thats wat u need


    Do you need an air gun for these?

    Or breaker bar do?

    ________________________________________

    Team: Moonstone GTI-6™
    Team: Working air-con™

    ian7675 wrote:
    Remember....a 6 isn't just a car, it's a part time job Thumbs up
    Posted 2nd Jul 2012 at 14:43
    Profile
    welshpug!

    Capt Pedantic

    Location: Bigend, Wales.

    Registered: 27 Mar 2007

    Posts: 25,838

    Status: Offline
    Post #18
    just a breaker bar.

    ________________________________________

    need a part number? get on here - http://public.servicebox.peugeot.com

    Bring on the Trumpets.

    Posted 2nd Jul 2012 at 14:48
    Profile
    dangti6

    aka JKshooter

    Location: Taunton, Somerset

    Registered: 15 Jun 2006

    Posts: 10,305

    Status: Offline
    Post #19
    They do one set in a box, and then I think it's called an 'Expansion set' with other sizes in. I think from the top of my head it's the expansion set you need for 19mm

    ________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 2nd Jul 2012 at 14:55
    Profile
    fatlapit

    Seasoned Pro

    Location: STOCKSFIELD

    Registered: 02 Nov 2010

    Posts: 3,040

    Status: Offline
    Post #20
    breaker bar you hammer them on a bit then breaker bar them off

    ________________________________________


    Posted 2nd Jul 2012 at 15:04
    Profile
    jimmyhackers

    Seasoned Pro

    Location: birmingham

    Registered: 14 Jun 2011

    Posts: 1,144

    Status: Offline
    Post #21
    id go witht he rounded bolt extractors. Drilling the head off the nut still leaves the thread in the hub. If its a real c**t id suggest getting some heat on the nut to lossen it beforehand

    ________________________________________

    the world is changed by people in sheds
    Posted 2nd Jul 2012 at 15:30
    Profile
    midlife

    Seasoned Pro

    Location: Colne, Lancashire

    Registered: 13 Mar 2006

    Posts: 7,544

    Status: Offline
    Post #22
    jimmyhackers wrote:
    id go witht he rounded bolt extractors. Drilling the head off the nut still leaves the thread in the hub. If its a real c**t id suggest getting some heat on the nut to lossen it beforehand


    Once the head of the bolt is removed the bit that's left sticking out of the hub will only be finger tight as it's no longer under tensionGeek

    Cool

    ________________________________________

    Get used to seeing the yellow one !!!MehMehMehMehMeh
    Team 330™Cool
    Team "no front end or engine"
    Team "LIMITED EDITION" I live for the 306 stickerSmug
    Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engineSmug
    203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine
    Posted 2nd Jul 2012 at 15:48
    Profile
    phillipm

    Seasoned Pro

    Location: Rotherham

    Registered: 15 Oct 2006

    Posts: 20,607

    Status: Offline
    Post #23
    ^^What he said.

    If the sockets aren't going on, just tack weld a nut to it.

    ________________________________________

    - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
    Email me!
    Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.
    Posted 2nd Jul 2012 at 15:53
    Profile
    bongo dts

    Senior User

    Location: Leicester

    Registered: 03 Jun 2008

    Posts: 633

    Status: Offline
    Post #24
    You can get the rounded bolt removers from Halfrauds as I used a set when my locking key snapped on my old car.

    Should still have them kicking about in the garage somewhere if they can be of any help as I'm not far from M1 J21?
    Posted 2nd Jul 2012 at 18:26
    Profile
    Home -> Forums -> Wheels / Tyres -> Rounded wheel bolt

    All times are GMT. The time is now 05:00

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.