displaying posts 1 to 22 of 22

Author Subject: New wheels fitted and a proper clean while the sun is out :)
sixysix

Seasoned Pro

Location: London

Registered: 27 Mar 2006

Posts: 2,659

Status: Offline

Post #1
Hi guys,

Bought playboyb's TD pro race 1.2's a few weeks back and finally fitted them today Smile
The wheels were in pretty good condition with a few little scrapes around a couple of the rims.

Got them home, gave them a good wash with billberry wheel cleaner, then clayed, cut, polished, and sealed and they came up nice and shiney Smile

I also touched in the kerbing marks as there was only a little bit so am not spending more money on a refurb as they are not too bad at all.

Bought some new tyres and fitted just the rears atm as the front pirelli's still have some life left in them.
Then bought new spigot rings, Mcgard locking bolts, and soaked the wheel bolts in vinegar for a few days to get rid of the rust Smile

I think they came up quite well...







Wheels are the same size as my old Compomotive MO6's which were 16 x 7
I bolted them all on this afternoon and all is good Smile

It's been a while since I had silver wheels so fancied a change... again LOL







I'm really pleased with them and been meaning to get some 1.2's for ages, especially in black but everyone seems to have them in black these days! LOL

________________________________________

My Pugrun 2007/2009 video clips
Take a look

Pugrun 2007...Lose yourself Laugh

Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).

PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).

P1 Diablo red 6 gone but not forgotten Sad
Posted 19th Jun 2012 at 23:27
seans6

Senior User

Location: Cheshire

Registered: 11 May 2011

Posts: 530

Status: Offline

Post #2
Looks really smart on the silver wheels, even though i have them, i agree everyone does black pro race nice to see silver. Smile

Personally, i would go with the standard headlights as they would match the wheels better than thr black imoSmile
Posted 19th Jun 2012 at 23:33
mattgti6phase2

Seasoned Pro

Location: inside my 6 abusing the tarmac!!

Registered: 16 Jul 2010

Posts: 2,371

Status: Offline

Post #3
Love these wheels Yes

Because you have black lights the wheels do not look right in silver so i agree with above. Standard lights to match the silver or leave the lights but you'll need the wheels black if you do that IMO.

Anyway these pics are the first I've seen of you car, what do we call it ....... Phase 1.5? LOL

________________________________________

Team Nile 6 Superman
Team: 40.2 MPG Smile
5 x a 306 owner!
currently abusing type r's in a town near you ™ Wink
I truely live for the 306 ®
Build date: 29th October 1997 Wednesday's car
midweek madness Tee hee
Posted 19th Jun 2012 at 23:55
sixysix

Seasoned Pro

Location: London

Registered: 27 Mar 2006

Posts: 2,659

Status: Offline

Post #4
I know what you mean about the lights guys.
I don't think it looks bad but I think the original lights would suit the silver better Smile
I don't need good headlights atm with longer days so I might just pop the originals back on soon as I still like the look of the originals, shame that a candle lights the way better than the original headlights, and that's with Osram night breakers LOL

1.5 seem pretty apt I think lol
Phase 1 body, phase 2 rear lights, phase 3 rub strips, phase chav headlights LOL

________________________________________

My Pugrun 2007/2009 video clips
Take a look

Pugrun 2007...Lose yourself Laugh

Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).

PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).

P1 Diablo red 6 gone but not forgotten Sad
Posted 20th Jun 2012 at 00:13
mattgti6phase2

Seasoned Pro

Location: inside my 6 abusing the tarmac!!

Registered: 16 Jul 2010

Posts: 2,371

Status: Offline

Post #5
LOL

How did you get the p2 lights to work on the p1 loom??

________________________________________

Team Nile 6 Superman
Team: 40.2 MPG Smile
5 x a 306 owner!
currently abusing type r's in a town near you ™ Wink
I truely live for the 306 ®
Build date: 29th October 1997 Wednesday's car
midweek madness Tee hee
Posted 20th Jun 2012 at 00:39
sixysix

Seasoned Pro

Location: London

Registered: 27 Mar 2006

Posts: 2,659

Status: Offline

Post #6
mattgti6phase2 wrote:
LOL

How did you get the p2 lights to work on the p1 loom??


I bought an adapter loom for the 306, the ones used on lexarse lights LOL
Only cost £10 and much easier than hacking up the existing wiring Smile

________________________________________

My Pugrun 2007/2009 video clips
Take a look

Pugrun 2007...Lose yourself Laugh

Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).

PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).

P1 Diablo red 6 gone but not forgotten Sad
Posted 20th Jun 2012 at 00:48
thugpuggin

Seasoned Pro

Location: Bristol

Registered: 10 Apr 2004

Posts: 26,784

Status: Offline

Post #7
Looking good as ever Mark, however you really should phase 3 it at the front end. Devil

________________________________________

Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.

Joint Kent Leader

Posted 20th Jun 2012 at 00:52
chrisd306

Seasoned Pro

Location: Perth Scotland

Registered: 26 Nov 2005

Posts: 10,061

Status: Offline

Post #8
love this car!!!

________________________________________

In my garage just now

2003 BMW M3 & 2009 L200 Raging Bull
& Audi Q5 S Line
AX stock rod & Saxo Stock rod
Sold the bike an charged rallye an bought a caravan, midlife crisis or what!
Posted 20th Jun 2012 at 02:36
dan86

Senior User

Location: Bideford

Registered: 10 May 2009

Posts: 548

Status: Offline

Post #9
Looks lovely as ever Mark, although standard headlights FTW.

________________________________________


Posted 20th Jun 2012 at 06:17
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #10

very nice mate Big grin

as said, headlights need changing

could be just me, but either the front end needs dropping, or the rear lifting Thumbs up

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 20th Jun 2012 at 07:55
stan_306gti6 Forum Admin

Location: Kent

Registered: 18 Jan 2004

Posts: 21,768

Status: Offline

Post #11
Looks lovely Mark. Thumbs up

Always loved the look of this car since the first Pug Run it attended. Yes

________________________________________

"Supercharged - 454.1bhp/317.5lb/ft"
Peugeot 306 GTi-6
2000 (X), Moonstone Love
Posted 20th Jun 2012 at 08:03
mjt4130

Regular

Location: hessle

Registered: 29 Sep 2009

Posts: 200

Status: Offline

Post #12
very nice diabloThumbs up
Posted 20th Jun 2012 at 08:29
sixysix

Seasoned Pro

Location: London

Registered: 27 Mar 2006

Posts: 2,659

Status: Offline

Post #13
Cheers guys Smile
I am going to swap the lights over tomorrow if I get the chance and won't take long Smile
And yes Jon, a full on phase 3 would be good but then again I still like the phase 1.5 look LOL

The car is dropped 30mm all btw.
It would look better with 40mm on the front to even things out looks wise but want to keep the balance as close to standard and dropped it evenly all round Smile

Will get a few more pics up when the lights are sorted Thumbs up

________________________________________

My Pugrun 2007/2009 video clips
Take a look

Pugrun 2007...Lose yourself Laugh

Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).

PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).

P1 Diablo red 6 gone but not forgotten Sad
Posted 20th Jun 2012 at 12:31
roland rat

Yeeeah Rat fans!

Location: Swansea

Registered: 29 Nov 2006

Posts: 22,284

Status: Offline

Post #14
Just to go against everyone on her im gonna say it looks s**t

Nah looks lovely mate,good work Wink
Posted 20th Jun 2012 at 12:35
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline

Post #15
I'm with rat Wink

Haha glad my old wheels are looking good mate, suits your car down to the ground!
Look after them mate Smile

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 21st Jun 2012 at 10:55
sixysix

Seasoned Pro

Location: London

Registered: 27 Mar 2006

Posts: 2,659

Status: Offline

Post #16
playboyb wrote:
I'm with rat Wink

Haha glad my old wheels are looking good mate, suits your car down to the ground!
Look after them mate Smile


thanks guys and they will be looked after and kept away from kerbs if I can help it Smile
Still have not changed the lights over yet as not had time yet.
Yesterday was the first free day I had to do stuff but that involved sorting out the front brakes, changing the droplinks, and fitting a new clutch cable.
Lights will be done soon as well and also looking at getting a new screen fitted as the original is looking a bit battered now! LOL

________________________________________

My Pugrun 2007/2009 video clips
Take a look

Pugrun 2007...Lose yourself Laugh

Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).

PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).

P1 Diablo red 6 gone but not forgotten Sad
Posted 3rd Jul 2012 at 17:36
mik

Seasoned Pro

Location: Kent

Registered: 17 Feb 2011

Posts: 2,100

Status: Offline

Post #17
Really like it, fantastic paintwork. Agreed it looks a tiny bit nose-up though. I definitely wouldn't P3 the front, I like the look of a really tidy P1 and there aren't that many around these days so they are something a bit different.

Is P1 OE light output really that cr@p? Maybe a way to de-chav those lights could be to paint/wrap the inside bits silver to make them look more subtle, maybe a bit like a P1 would look if OE crystal P1 lights existed. Or maybe I'm talking bollox.

________________________________________

Cherry Rallye SOLD

Posted 3rd Jul 2012 at 19:24
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #18
Those wheels are superb, I'm suprised Sam sold them on as IMHO they look way better than the 17" Superleggeras he has on the SC China now. Glad to see they found their way onto another tidy motor and one more vote from me for standard lights. Maybe a standard grille badge too? Sweet car though, good to se a phase one in such tidy condition.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 4th Jul 2012 at 13:36
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline

Post #19
I do like them jim and I was in 2 minds about selling them on, each to their own at the end of the day matey Smile

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 4th Jul 2012 at 13:52
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #20
playboyb wrote:
I do like them jim and I was in 2 minds about selling them on, each to their own at the end of the day matey Smile


Just not a fan of 17"s, they just that little bit too big to suit, I only have them on the race car for brake clearance and as tyre availability is better. As you say each to their own though, was it good up the hill? Cool

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 4th Jul 2012 at 14:04
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline

Post #21
Yeah mate was awesome up there, loved it. Probably going to try and get some track time again at some point this year too Big grin

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 7th Jul 2012 at 17:44
daveyboy

aka Jim Davey

Location: Southampton

Registered: 01 Oct 2007

Posts: 8,648

Status: Offline

Post #22
Good man, keep an eye on the oil temps and let me know how the thirteen row cooler copes.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars
Posted 8th Jul 2012 at 17:17

All times are GMT. The time is now 05:55

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.