displaying posts 1 to 18 of 18

Author Subject: Valeo Black mask's Conversion service
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #1
Ok so I've been making black masks for some time now
but lots of people don't know if I'm still making them or not well this is to kinda set the record strait.
I've done lots of sets now and I'm probably of a hand full of people that can get them opened and re-sealed cleanly enough to barley tell they were ever opened!
I only use Valeo's harder work but a better quality of light for a better result and fitment!
I can do depo's, Lucas, etc if you wish to provide them!


I charge
£65 if you wish to provide me with your own lights for masking returned,..

£120 on lights if you wish for me to find you the lights returned
I try get them with as fewer marks on the lens's and with all the mounts intact!
i can't guarantee this though since I usually source these online and have to take the sellers word for their condition!

I can also re-case ph3 Crystals into ph2 Light for those that have ph3 lights with broken mounts
for £75 returned if you are providing the lights returned!

here are some examples of my work!









please Pm me if you have any further questions
or if you would like to check some feedback do a search for black mask's
and you should find quite a few of the lights I've done as well as feedback on them!

Dave

________________________________________

Proud Member of the ASTOR Owners Club
Posted 21st May 2012 at 16:57
coskev

Seasoned Pro

Location: Oswestry

Registered: 01 Nov 2009

Posts: 3,132

Status: Offline

Post #2
Never mind p**sing about on your PC!!!!Big grin

Get in the garage and get mine done!!!Thumbs up

________________________________________

Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........

Mac1 ZR R1 kit car build in progress.
Posted 21st May 2012 at 17:21
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #3
I'm on it boss!
Lenses are off masks are blacked just got to get the old gasket out and re-bonded looking to have these back off to you tomo! Wink

________________________________________

Proud Member of the ASTOR Owners Club
Posted 21st May 2012 at 17:49
playboyb

Seasoned Pro

Location: Maidstone Son!

Registered: 27 Jun 2011

Posts: 1,464

Status: Offline

Post #4
I got mine through a couple of weeks back and quality is top notch, great price, great service, top lad!

________________________________________

306 1.8 xs moonstone blue-SOLD
306 gti6 supercharged china blue-SOLD
406 coupe D9 3.0 V6-SOLD

Posted 21st May 2012 at 19:38
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #5
Thumbs up

________________________________________

Proud Member of the ASTOR Owners Club
Posted 21st May 2012 at 19:49
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #6

Are mine in the post ????

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 21st May 2012 at 19:56
coskev

Seasoned Pro

Location: Oswestry

Registered: 01 Nov 2009

Posts: 3,132

Status: Offline

Post #7
gnrlee wrote:
I'm on it boss!
Lenses are off masks are blacked just got to get the old gasket out and re-bonded looking to have these back off to you tomo! Wink


LOL

Nice one,cheersThumbs up

________________________________________

Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........

Mac1 ZR R1 kit car build in progress.
Posted 21st May 2012 at 20:40
mark s

Junior User

Location: Northamptonshire

Registered: 19 Apr 2010

Posts: 96

Status: Offline

Post #8
Got mine done by gnrlee and the quality is brilliant! Can hardly tell they have been taken apart, highly recommend his service Smile
Posted 21st May 2012 at 20:50
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #9
jord294 wrote:

Are mine in the post ????


they are indeed! went this morning will be with you Wednesday

Parcel force 48 Smile

let me know when they arrive!

________________________________________

Proud Member of the ASTOR Owners Club
Posted 21st May 2012 at 21:52
barnettjd77

Regular

Location: dorchester

Registered: 12 Nov 2011

Posts: 483

Status: Offline

Post #10
Get mine sorted too! :tumbsup

________________________________________

A red rallye in progress!
Posted 22nd May 2012 at 18:44
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #11
LOL repaired your broken mount! got the lense and dug out the old gasket on 1 light! Wink shouldn't be long! Smile

________________________________________

Proud Member of the ASTOR Owners Club
Posted 22nd May 2012 at 20:45
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #12
Bump I've just finished doing my last set,..

anyone want some doing I have a few sets of lights I can use to get strait to work
if needed? Big grin

________________________________________

Proud Member of the ASTOR Owners Club
Posted 31st May 2012 at 01:45
Lecktorious

aka G.

Location: Edinburgh

Registered: 08 Jan 2009

Posts: 920

Status: Offline

Post #13
I'll maybe give you a shout in a few weeks mate. I assume you can do other colours too?

________________________________________

'98 Nile Blue 306 GTi 6
Posted 6th Jun 2012 at 21:30
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #14
if it comes in a spray tin Yes

you'd be among the 1st to try a differed colour what were you thinking?

________________________________________

Proud Member of the ASTOR Owners Club
Posted 6th Jun 2012 at 21:51
Lecktorious

aka G.

Location: Edinburgh

Registered: 08 Jan 2009

Posts: 920

Status: Offline

Post #15
Gun metal grey, same colour as these:



Currently getting my Cyclones powdercoated in this colour.

________________________________________

'98 Nile Blue 306 GTi 6
Posted 6th Jun 2012 at 23:12
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #16
it'll be easier if you buy the paint that closest matches those alloys then and then send the tin
or get me a paint code and i'll see if it can be matched! Wink

________________________________________

Proud Member of the ASTOR Owners Club
Posted 6th Jun 2012 at 23:19
Lecktorious

aka G.

Location: Edinburgh

Registered: 08 Jan 2009

Posts: 920

Status: Offline

Post #17
I'll get the coater to coat a scrap bit of metal. Would you need it lacquered or unlacquered to get the best match?

________________________________________

'98 Nile Blue 306 GTi 6
Posted 6th Jun 2012 at 23:21
gnrlee Forum Admin

Location: Leeds

Registered: 20 Aug 2005

Posts: 8,882

Status: Offline

Post #18
Lecktorious wrote:
I'll get the coater to coat a scrap bit of metal. Would you need it lacquered or unlacquered to get the best match?


what ever Finnish you want there not going on my car LOL
i'll try get as close as possible

________________________________________

Proud Member of the ASTOR Owners Club
Posted 7th Jun 2012 at 01:03

All times are GMT. The time is now 06:06

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.