Kent Cams - Parts For Sale Forum - Peugeot 306 GTi-6 & Rallye Owners Club

displaying posts 1 to 7 of 7

Author

Subject: Kent Cams

darrellspeed

Senior User

Location: Exeter

Registered: 01 Jul 2008

Posts: 814

Status: Offline

Post #1

Hi Guys

Here are a set of Kent Cams for sale, these are the PT85's which have been set by pug1off to clear the oil spray bar yet keep the power up and make it really exciting. the engine was built by them so they should be able to answer any queries.

only used for running in so 1000 miles, decided i want a wilder profile though so now for sale.

Price £300ono plus postage. will be ebayed if no interest on here.

________________________________________

205 XU10J4RS by PUG1OFF 236.4 BHP at Northampton Motorsport.

Lets Race!

Posted 19th Jan 2012 at 15:28

Profile

darrellspeed

Senior User

Location: Exeter

Registered: 01 Jul 2008

Posts: 814

Status: Offline

Post #2

bump

________________________________________

205 XU10J4RS by PUG1OFF 236.4 BHP at Northampton Motorsport.

Lets Race!

Posted 21st Jan 2012 at 13:05

Profile

jeffers Forum Admin

Location: Leeds

Registered: 14 Dec 2003

Posts: 3,702

Status: Offline

Post #3

I take it these require solid lifters, forged pistons etc to work?? Unsure

________________________________________

Team Running Engine again!
Team Negative Camber!
My Budget track engine build thread!
Now appearing at a Trackday near you!! Hyper

Posted 21st Jan 2012 at 13:19

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #4

jeffers wrote:

I take it these require solid lifters, forged pistons etc to work?? Unsure

hell yeah

Applications Race
Power Band 4500-8500
Cam Lift(mm) 11.98mm Inlet/Exhaust
Valve Lift(mm) 11.73mm Inlet/Exhaust
Duration 314 Deg Inlet/Exhaust
Timing 53/81 Inlet 81/53 Exhaust
Full Lift 104 Deg Inlet/Exhaust
VC (mm) 0.25mm Inlet/Exhaust
LTDC 3.83mm Inlet 3.70mm Exhaust

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 21st Jan 2012 at 13:36

Profile

darrellspeed

Senior User

Location: Exeter

Registered: 01 Jul 2008

Posts: 814

Status: Offline

Post #5

It was actually really nice to drive lots of low down power, the guy who mapped it was very surprised and said it didnt seem much like a race cam at all. for more info Call Matt at Pug1off. he will tell you whats required. but yes it will need Solid lifters, not sure if you can get away with standard pistons though.

________________________________________

205 XU10J4RS by PUG1OFF 236.4 BHP at Northampton Motorsport.

Lets Race!

Posted 21st Jan 2012 at 16:55

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,839

Status: Offline

Post #6

most certainly not, look at the lift @ TDC figure!

let alone the increased compression required to work with the duration.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 21st Jan 2012 at 19:58

Profile

Teshboi1988

Regular

Location: Dartford

Registered: 29 Jan 2012

Posts: 131

Status: Offline

Post #7

have u sold them??

________________________________________

phase 3 Hatchback V reg 5Door GTi6

Posted 18th Mar 2012 at 08:24

Profile

All times are GMT. The time is now 04:05

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.