Author	Subject: opinions on tapper???
velar Regular Location: swindon Registered: 04 Jan 2009 Posts: 448 Status: Offline	Post #1 high compression engine with piper285s that is a but noisy. What do people think 1st and 2nd ________________________________________ L reg "black and blue" phase 1 track 6
Posted 9th Sep 2011 at 16:40 Profile

velar Regular Location: swindon Registered: 04 Jan 2009 Posts: 448 Status: Offline	Post #2 Took the Head off and found 2 bent bent inlet valves on cylinder 3. (not bent enough to see by eye, but very wobbly in the lathe.) ________________________________________ L reg "black and blue" phase 1 track 6
Posted 3rd Oct 2011 at 17:54 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline	Post #3 standard pistons? ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 3rd Oct 2011 at 18:03 Profile

velar Regular Location: swindon Registered: 04 Jan 2009 Posts: 448 Status: Offline	Post #4 no, poor engineering when fitting new cams I think ________________________________________ L reg "black and blue" phase 1 track 6
Posted 3rd Oct 2011 at 22:07 Profile

jeffers Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline	Post #5 Did u per chance turn one cam pulley over whilst the other was pinned?? ________________________________________ Team Running Engine again! Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!
Posted 3rd Oct 2011 at 22:18 Profile

velar Regular Location: swindon Registered: 04 Jan 2009 Posts: 448 Status: Offline	Post #6 Yes just a little bit !!! long story, involving cam carrier bolts snapping due to previous owner stretching them. cams went in and out a few times. I put one in a bit out of time, and thought I would get away with a little "turn" rather than removing again. Lesson learnt the hard way. ________________________________________ L reg "black and blue" phase 1 track 6
Posted 3rd Oct 2011 at 22:34 Profile

jeffers Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline

Post #7 velar wrote: Yes just a little bit !!! long story, involving cam carrier bolts snapping due to previous owner stretching them. cams went in and out a few times. I put one in a bit out of time, and thought I would get away with a little "turn" rather than removing again. Lesson learnt the hard way. I feel ur pain, i did something similar last year...... apain to say the least! ________________________________________ Team Running Engine again! Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!

Posted 6th Oct 2011 at 14:57 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)