205 With Honda Rear Engine - Projects Forum - Peugeot 306 GTi-6 & Rallye Owners Club

displaying posts 1 to 25 of 108

Pages (5): [1] 2 3 .. last

Author

Subject: 205 With Honda Rear Engine

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #1

The guys in the workshop next to mine were after a new project, and having an old Honda vtec estate laying around the ideas started to flow, a Nova and a 106 was mentioned but I had a 205 STDT shell which was going to scrap so this was donated.

Its just the start but here are them both ready to be cut and shut so to speak,

will post up progress as we go Smile

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 25th May 2011 at 00:31

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #2

Lots cutting has been done so far!

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 26th May 2011 at 00:09

Profile

nick!

Seasoned Pro

Location: Essex

Registered: 20 Nov 2007

Posts: 1,191

Status: Offline

Post #3

haha, nutters!

________________________________________

Cherry Red Rallye - 179.1bhp@fly, 148.4bhp@wheels

Posted 25th May 2011 at 03:41

Profile

lotek

Seasoned Pro

Location: Berkshire

Registered: 04 Dec 2007

Posts: 6,107

Status: Offline

Post #4

Posted 25th May 2011 at 22:55

Profile

joe5y

Senior User

Location: Reading

Registered: 21 Sep 2010

Posts: 851

Status: Offline

Post #5

Can't wait to see the outcome of this Smile

________________________________________

noaki wrote:

im sorry i wasn't aware 306gti6.com was a cult

** Team: EX-GTI-6 ** Team: EX-Phase 3 ** Team: EX-Black!

EX owner of a 1999 Peugeot 306 GTI-6 in Black
2006 VW Golf GT-Tdi 170 in Black
1996 Fiat Coupe 20V Turbo In Red
2005 Mitsubishi L200 Warrior in black, chipped with bigger wheels.
2007 Vauxhall Vivaro in Navy blue with alloys and lowered

Posted 26th May 2011 at 17:25

Profile

phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #6

Please tell me they're not just going to weld the whole front subframe + suspension setup into the back and hope?

________________________________________

- Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM me
Email me!
Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces.

Posted 26th May 2011 at 19:56

Profile

rikky 🦔

Location: cheshire

Registered: 28 Feb 2004

Posts: 26,796

Status: Offline

Post #7

i know! exactly what i was thinking. reminded me of a lad putting a v6 into the back of something from a 406 coupe. he welded the whole back end in and it was quite poor results, it was on one of the pug forums

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]

Posted 26th May 2011 at 20:04

Profile

birk

Seasoned Pro

Location: Doncaster

Registered: 24 Oct 2005

Posts: 7,032

Status: Offline

Post #8

Think it was a 106 rikky

________________________________________

Dimma + Gt35 turbo = Ninja

Solid rear beam mounts £130
07889376885
Dan

Posted 26th May 2011 at 20:59

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #9

phillipm wrote:

Please tell me they're not just going to weld the whole front subframe + suspension setup into the back and hope?

dont be silly! Crazy

that would be stupid!

there is a full cage being made and going straight on the strut top of the Honda.

here is more progress, its looking a beast.

oh and the tubes are just to hold the shell square till the cage goes in.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 27th May 2011 at 01:37

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #10

rikky wrote:

remember that but dont think he ever got it running or finished, the shell would flex to hell!

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 27th May 2011 at 02:07

Profile

phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #11

gkz 206 wrote:

phillipm wrote:

Please tell me they're not just going to weld the whole front subframe + suspension setup into the back and hope?

Either you're the master of internet sarcasm and I completely missed it or thats exactly what they've done? Blink

________________________________________

Posted 27th May 2011 at 02:29

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #12

phillipm wrote:

gkz 206 wrote:

phillipm wrote:

Please tell me they're not just going to weld the whole front subframe + suspension setup into the back and hope?

Either you're the master of internet sarcasm and I completely missed it or thats exactly what they've done? Blink

Oh ok I see what you mean?! Yes a full space frame would be good but that takes a lot of time to do. Yes in a perfect world that would be great, but the is nothing wrong with whats being done, the cage will be the strength of the car so will go right down to the rear of the Honda subframe, up to the turrets, round to the sills of the car and to the front turrets and floor?

Now your going to say thats not great but MG just bolted a Metro subframe to the rear to make a MGF ok not the best example but it works.

The rack will be taken off and arms made so you have fully adjustable rear suspension, coilovers are going in on the front and rear to.

So wheres the problem?

Oh and forgot to mention this car wont be on the road so will just be a track toy.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 27th May 2011 at 03:29

Profile

phillipm

Seasoned Pro

Location: Rotherham

Registered: 15 Oct 2006

Posts: 20,607

Status: Offline

Post #13

Not a problem, just seems silly to me to go to all that effort of making it and a full cage and not just stick a tubular subframe and match suspension under there at the same time.
It won't handle all that well just welding the front frame in the rear, they'll probably have to make the suspension hard as nails so that the suspension hardly moves otherwise it'll be somewhat dicey as it'll flick from understeer to oversteer through different parts of the suspension travel/body pitch/roll

________________________________________

Posted 27th May 2011 at 04:39

Profile

chrisd306

Seasoned Pro

Location: Perth Scotland

Registered: 26 Nov 2005

Posts: 10,061

Status: Offline

Post #14

boys up here Trac-Prep made a mental redtop rear engined 205 gti, was good fun and was a tad to mental to be any use at knockhill but was fun at crail on the strip and on the oval

________________________________________

In my garage just now

2003 BMW M3 & 2009 L200 Raging Bull
& Audi Q5 S Line
AX stock rod & Saxo Stock rod
Sold the bike an charged rallye an bought a caravan, midlife crisis or what!

Posted 27th May 2011 at 11:18

Profile

eddy_gti6

Seasoned Pro

Location: Durham

Registered: 20 Oct 2008

Posts: 8,716

Status: Offline

Post #15

I would have picked a better engine than that tho, The gray 106 with that engine in the back was at york raceway last time i was down in april and it wasn�t very impressive. i bet you would get a better result using a gti6 engine. am sure the 106 was running something like 14.5 whats not very good at all for all the time and effort put into it.

Still a good project to watch. look forward to seeing it finished

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =

Posted 27th May 2011 at 12:33

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #16

Agree it could be better, and a better engine but Im sure when done it will look great and be fun!

It only being built for fun, nothing else! parts laying around decided what was being used, so very little money so far has been spent if anything!

Im not building it and its not my car or my choices, I would have used a GTi-6 or a V6 or something pug but it still looks mean and will be fun.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 27th May 2011 at 13:55

Profile

rallyeash

Seasoned Pro

Location: Devizes

Registered: 11 Dec 2006

Posts: 4,424

Status: Offline

Post #17

look forward to seeing this come on, yeah you could of used a better vtec lump but that will be good fun for now then in long term could swap to a DC5 lump or similar?

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Hyper

Project thread here
309 3dr K20 Type R

Posted 27th May 2011 at 22:20

Profile

mattgti6phase2

Seasoned Pro

Location: inside my 6 abusing the tarmac!!

Registered: 16 Jul 2010

Posts: 2,371

Status: Offline

Post #18

insane!!!!! Cool

________________________________________

Team Nile 6 Superman

Team: 40.2 MPG Smile

5 x a 306 owner!
currently abusing type r's in a town near you � Wink

I truely live for the 306 ®
Build date: 29th October 1997 Wednesday's car
midweek madness Tee hee

Posted 27th May 2011 at 23:38

Profile

monkeyman

Seasoned Pro

Location: Sunny St Albans

Registered: 01 Oct 2008

Posts: 1,955

Status: Offline

Post #19

Please please please keep the steering

http://www.youtube.com/watch?v=7K8pqwPQGG8
LOL

________________________________________

Spanner Monkeys Monkey Spanner
Forum Search Clicky

Posted 27th May 2011 at 23:50

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #20

A custom cages roll cage has been ordered and welded in along with a lot of other welding to make the rear of the shell nice and strong;

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 8th Jun 2011 at 00:39

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #21

The wiring has now been started which is always a pain!

Spent ages working out why the fuel pump would not prime or go when cranking only to find an earth had been snagged by mistake while removing the loom from the Honda!!

Just got to work out whats needed now and get rid of whats not then mount it all in the car.

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 12th Jun 2011 at 22:22

Profile

lotek

Seasoned Pro

Location: Berkshire

Registered: 04 Dec 2007

Posts: 6,107

Status: Offline

Post #22

holy shit

Posted 23rd Jun 2011 at 03:41

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #23

work has got in the way a bit now slowing things down but still getting a bit done.

honda front subframe was lightened a bit as it weighed a ton!;

gear linkage made out of 2 306 gear rods, gear change is a very short shift!

wiring is coming to, engine does run so all is good, honda switches and instruments being mounted on 205 column;

a very old capri racing tank is being mounted in the front and is a perfect fit.

dimma kit found on ebay and soon to be fitted;

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 3rd Jul 2011 at 22:10

Profile

russbez

Seasoned Pro

Location: Inverness-Shire

Registered: 19 Dec 2005

Posts: 7,459

Status: Offline

Post #24

nuts

i like it!!

________________________________________

TEAM HIGH BOOST SUPERCHARGED RALLYE

My Rallye project thread

Posted 4th Jul 2011 at 17:07

Profile

Carl Chambers

Seasoned Pro

Location: suffolk/norfolk

Registered: 10 Sep 2004

Posts: 2,897

Status: Offline

Post #25

water pipes done, not my choice of piping more like central heating but does the job Im sure plus will help cooling aswell;

exhaust done aswell, again not my choice of tailpipe but just one that was laying around, and is suprisingly quiet;

rear coilover and adjustable top wishbones;

________________________________________

Carl Chambers
email; pugnacious.peugeot@yahoo.co.uk
.
C.M.CHAMBERS CARS
Peugeot Specialist
Tel; 01379 586101 after 6.30 or 07889 082466 anytime.

pugsport-racing.co.uk

Posted 10th Jul 2011 at 02:56

Profile

Pages (5): [1] 2 3 .. last

All times are GMT. The time is now 16:51

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.