Post #1
I'm presuming not, but thought I would ask anyway as mine has sheared and I have never seen a 6 or rallye at any of my local scrappies.Thanks in advance!
________________________________________
Black Rallye
|
displaying posts 1 to 11 of 11
| Author | Subject: Any other 306 models share the same centre section? |
 bonzo
Seasoned Pro  Location: Telford Registered: 06 Nov 2007 Posts: 2,272 Status: Offline |
Thanks in advance! Black Rallye |
 Posted 5th May 2011 at 01:16
|
|
|
roland rat
Yeeeah Rat fans!  Location: Swansea Registered: 29 Nov 2006 Posts: 22,284 Status: Offline |
Post #2
Phase 3 XSI IIRC |
|
Posted 5th May 2011 at 02:13
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline |
Post #3
all XSI's, plus the S16.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 5th May 2011 at 02:33
|
|
|
bonzo
Seasoned Pro Location: Telford Registered: 06 Nov 2007 Posts: 2,272 Status: Offline |
Post #4
Ah! may have more luck with that, cheers! Will have a look round the scrappies! ________________________________________ Black Rallye |
|
Posted 5th May 2011 at 05:11
|
|
|
aggyj17
Junior User  Location: lincolnshire Registered: 21 Nov 2010 Posts: 76 Status: Offline |
Post #5
I think that if the exhaust is rotten that should be an excuse to upgrade.  |
|
Posted 6th May 2011 at 01:54
|
|
|
dragoon
Seasoned Pro  Location: Ghent - Belgium Registered: 30 Dec 2008 Posts: 1,071 Status: Offline |
Post #6
welshpug! wrote: all XSI's, plus the S16. if so, the 1.8 16v midsection will also fit ________________________________________ Team WheelwhoreTeam Limited Edition Astor 306 Francorchamps RIP Virtual Blue 208 GTi quote: I  this place. So many illiterate deluded fool's acting 'ard . . . and so many literate intelligent people to rip them apart and knock them back down again . . . ahh  |
|
Posted 8th May 2011 at 22:48
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline |
Post #7
probably, though may be smaller bore, not checked part numbers.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 9th May 2011 at 04:18
|
|
|
berger
Seasoned Pro  Location: Bathurst Registered: 26 Oct 2008 Posts: 1,068 Status: Offline |
Post #8
Just buy a new one.Even if you can't afford a Peugeot one a pattern part will be what £40? ________________________________________ Bang'in 7 gram rocks!I have one gear, GO! |
|
Posted 9th May 2011 at 22:04
|
|
|
bonzo
Seasoned Pro Location: Telford Registered: 06 Nov 2007 Posts: 2,272 Status: Offline |
Post #9
Pattern part never seem to fit quite right in my experience.________________________________________ Black Rallye |
|
Posted 9th May 2011 at 23:45
|
|
|
bonzo
Seasoned Pro Location: Telford Registered: 06 Nov 2007 Posts: 2,272 Status: Offline |
Post #10
Pattern part never seem to fit quite right in my experience.________________________________________ Black Rallye |
|
Posted 9th May 2011 at 23:46
|
|
|
xsisid
Newbie Location: lincoln Registered: 22 Jan 2010 Posts: 49 Status: Offline |
Post #11
Can sell you a magnex.  |
|
Posted 13th May 2011 at 03:22
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)