displaying posts 1 to 20 of 20

Author Subject: OEM parts shortage
foot

Senior User

Location: worthing

Registered: 09 Aug 2008

Posts: 754

Status: Offline

Post #1
So as some of you may be aware I'm currently in the middle of overhauling my GTI. While doing this i have hit a good few issues which has meant i have spent quite a lot of time on the phone to my local main dealer and various motor factors looking for replacement parts. In doing all of this I have been made aware of some rather worrying information.

It turns out that Peugeot and most if not all of the main motor factors are now no longer able to supply cambelt kits due to a shortage of the tensioner (137 kit) and pulleys (136 kit) you are however still able to purchase the belt on its own however if you do so i hope you have better luck than i have just had as my genuine belt half split after the first turn over. Turns out I was sold a belt that was boxed back in 2008.

I have also found that Peugeot no longer supply master cylinders at all and most of the motor factors can only supply none ABS models which is absolutely no help for me so i am currently in the middle of re-boxing up the 5th incorrectly supplied one and currently in conversations with Spoox motorsport who I'm waiting for them to supply me photos of what i hope is the correct item.

so basically if you are sitting on a lovely stock pile of parts I think you could very well be sitting on a gold mine in the coming years
Posted 28th Mar 2018 at 22:45
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #2
Give me a shout if you struggle bud. Got a decent contact.

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 28th Mar 2018 at 22:51
foot

Senior User

Location: worthing

Registered: 09 Aug 2008

Posts: 754

Status: Offline

Post #3
Thanks Ben i will do
Posted 28th Mar 2018 at 23:05
barrym

Senior User

Location: Westcliff-on-sea

Registered: 26 Jun 2014

Posts: 502

Status: Offline

Post #4
Master cylinder is shown as NFP on sericebox but should still be available 4601 F7 with ABS £143.86

________________________________________

China D Turbo HDi daily charger
Black Rallye occassional toy
Posted 28th Mar 2018 at 23:30
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #5
Its also a Bosch part. If someone knows the Bosch part nu,ber, you can probably get one direct from them or elsewhere on the net, just like with the rear compensators

If i were to be buying a belt, id get one direct from a Gates supplier. They supplied Peugeot anyhow IIRC. Likely to be much newer...

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 28th Mar 2018 at 23:51
rich_w

Seasoned Pro

Location: Havant, Hampshire

Registered: 29 Jul 2004

Posts: 5,412

Status: Offline

Post #6
I ordered an OEM belt kit (136) a week or so ago and it came through fine?

Maybe worth trying a different dealer.

I use Tomo Parts.

Cheers
Rich

________________________________________

Contact Details:

rich@lynxpowerengineering.co.uk
07732 822546

Posted 29th Mar 2018 at 07:03
Rich E Forum Admin

Location: Hertfordshire

Registered: 27 Apr 2005

Posts: 7,757

Status: Offline

Post #7
quote:
Its also a Bosch part. If someone knows the Bosch part nu,ber, you can probably get one direct from them or elsewhere on the net, just like with the rear compensators


http://www.bosch-automotive-catalog.com/en/product-detail/-/product/0204123351

The product info is easy enough to find but Bosch discontinued the master cylinder 4 years ago, which explains the current supply difficulty.

It seems they discontinued the compensator last month so I would imagine supplies of that will start to dwindle soon too.

________________________________________

Rich
Posted 29th Mar 2018 at 12:47
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #8
It’s also knowing where else to look Wink

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 29th Mar 2018 at 13:42
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #9
That is a bit of a s**t.....thanks for the update Rich.

Andy, i think you and i share the same parts man.....was conversing with him about this last night. Not a part dealers tended to hold it seems. Ordered as and when needed....

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 29th Mar 2018 at 15:24
foot

Senior User

Location: worthing

Registered: 09 Aug 2008

Posts: 754

Status: Offline

Post #10
If anyone knows of the location of a master cylinder please let me know as no where has stock that I can find
Posted 29th Mar 2018 at 16:27
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #11
Feelers feeling.....

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 29th Mar 2018 at 17:19
foot

Senior User

Location: worthing

Registered: 09 Aug 2008

Posts: 754

Status: Offline

Post #12
Thanks Ben
Posted 29th Mar 2018 at 17:26
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #13
quote:
[quote="Ben_W"]That is a bit of a s**t.....thanks for the update Rich.

Andy, i think you and i share the same parts man.....was conversing with him about this last night. Not a part dealers tended to hold it seems. Ordered as and when needed....


Parts man does come in handy sometimes, but do a lot off my own back with some success

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 29th Mar 2018 at 17:46
Nose

Senior User

Location: Birmingham

Registered: 23 Jun 2013

Posts: 994

Status: Offline

Post #14
Hi foot,
The GATES part number on the 136 tooth belt kit is K025468XS, they are readily available.
If you just want the belt on it's own it's part number 5468XS

I've come up with a few master cylinder part numbers for you to look at using the original. nmber of 4601F7

1574 is the LPR part number
132520B is the BENDIX number
MC1776BE is the Brake Engineering number
LM49930 is the Delphi number.
I think PMK526 is the TRW number?


Re the pressure reg valve, I have Bosch number of 0986482040 although, this is listed from an RP number so I'm not 100% certain the part number is correct. But it is still available from. Bosch.Hope this helps bud.
Cheers




________________________________________

Bianca 306 Rallye.
Mondeo Titanium X.
Posted 30th Mar 2018 at 22:15
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #15
Bosch number for rear brake compensator 0204131271

I was lucky enough to get one for much less than half price from latvia

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 30th Mar 2018 at 20:55
Nose

Senior User

Location: Birmingham

Registered: 23 Jun 2013

Posts: 994

Status: Offline

Post #16
quote:
[quote="jord294"]Bosch number for rear brake compensator 0204131271

I was lucky enough to get one for much less than half price from latvia






thanks for the part number Andy, i'll check it out at work 2moz. I got a new Bosch one for the Rallye a couple of years back through Amazon believe it or not, cost was £45 delivered - bargain! Smile

________________________________________

Bianca 306 Rallye.
Mondeo Titanium X.
Posted 30th Mar 2018 at 22:14
Nose

Senior User

Location: Birmingham

Registered: 23 Jun 2013

Posts: 994

Status: Offline

Post #17
I checked today and Bosch do still have stock of the reg valve.

________________________________________

Bianca 306 Rallye.
Mondeo Titanium X.
Posted 31st Mar 2018 at 18:12
jord294

Seasoned Pro

Location: somewhere in north wales

Registered: 09 Nov 2009

Posts: 3,110

Status: Offline

Post #18
Do you have prices please Paul?

________________________________________

FRESHLY RE-FURBISHED GTI BEAMS
FITTING AND LOWERING AVAILABLE.
ALL AXLES BUILT USING GENUINE PEUGEOT PARTS

IF I'M NOT HERE, IT ONLY MEANS ONE THING.... I'M SOMEWHERE ELSE!
Posted 31st Mar 2018 at 19:07
Ben_W

Formerly gpm

Location: Lutterworth

Registered: 01 Sep 2007

Posts: 2,941

Status: Offline

Post #19
Yes, I'd be interested to know more too. I'll be needing one for my restoration.

________________________________________

Cherry Red Rallye .... On going OEM spec resto

China Blue GTi6 .... Weekend toy

Black 208 GTi .... Wife's car now

Silver BMW 550i.... The executive missile

Posted 1st Apr 2018 at 10:30
rudolf

Seasoned Pro

Location: Skelmersdale

Registered: 07 Apr 2004

Posts: 2,769

Status: Offline

Post #20
TRW Brake Master Cylinder:

https://www.ebay.co.uk/itm/Master-Cylinder-TRW-PMK585-Peugeot/153080309709?epid=1016741433&hash=item23a44c27cd:g:WxQAAOSwFRtdXLJy

________________________________________

S Reg Diablo standardsSpec SORNED
R Reg Nile standard spec written off then repaired
X Reg Astor in need of TLC
R Reg Nile to restore
Set of Lions to fit.
Posted 19th Oct 2019 at 09:49

All times are GMT. The time is now 16:15

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.