Reconditioned Cylinder Head - Parts For Sale Forum - Peugeot 306 GTi-6 & Rallye Owners Club

displaying posts 1 to 9 of 9

Author

Subject: Reconditioned Cylinder Head

rich_w

Seasoned Pro

Location: Havant, Hampshire

Registered: 29 Jul 2004

Posts: 5,412

Status: Offline

Post #1

Hi all,

I have a reconditioned cylinder head for sale.

The spec is:

- 12 new valves
- new valves stem oil seals
- valve guides inspected
- all seats recut on a Serdi machine - 3 angle profile
- skimmed

£275 collected, or £290 delivered.

Ideal if you have a tapper, or if you're doing a head gasket and want to freshen up the top end.

Head comes with camshaft bearing caps, but no cams or lifters.

Will do a deal with one of our uprated HGs and a set of bolts for an extra £50.

Cheers
Rich.

________________________________________

Contact Details:

rich@lynxpowerengineering.co.uk
07732 822546

Posted 25th Apr 2016 at 23:36

Profile

armzsc6

Seasoned Pro

Location: Crowborough

Registered: 22 Mar 2008

Posts: 3,445

Status: Offline

Post #2

Not a bad price. Last one I had done fully with 16 valves and 8 new guides seats recut skimmed pressure tested cost around £400 but that is at one of the dearest places around but they do a perfect job.

Ideal for someone with a tapper though.

________________________________________

Black power baby! SUUUUUPERCHARGED Superman

Seat Leon FR TDI 190BHP 300lbft daily gti-6 killer :p
12x 306's owned so far

Cambelts, clutches, service work carried out on All makes and models, Peugeot Citroen / mitsubishi specialist.
Pug planet / Citroen Lexia diagnostics / code reads available.

Posted 26th Apr 2016 at 13:31

Profile

rich_w

Seasoned Pro

Location: Havant, Hampshire

Registered: 29 Jul 2004

Posts: 5,412

Status: Offline

Post #3

Thanks - yeah it's a good deal for someone.

The place I use is also a top end place, and I could get it done a lot more cheaply, but don't they are very experience with the XU10J4RS head, have done all the heads on our big power S/C engines, and we never have any issues.

I have had heads done elsewhere and had issues, but would rather it was done by someone with the best tooling and knowledge, even if it costs more Smile

________________________________________

Contact Details:

rich@lynxpowerengineering.co.uk
07732 822546

Posted 26th Apr 2016 at 13:39

Profile

ale624

Regular

Location: bristol

Registered: 02 May 2016

Posts: 173

Status: Offline

Post #4

Hi there mate, im interested. is this still available?

I've recently bought a 306 Rallye and i notice that it has a bit of a tap to it, stays throughout the rev range, hot or cold. i got a pretty decent deal for it so i would really like for it to not tap! haha

managed to find some history about it here on the forum in fact! apparently its been making a tapping noise since at least 2009 and it was owned by Stingfish (http://www.306gti6.com/forum/showthread.php?id=155709) which he says here that he thought it was a sticky tappet.

also another owner here: http://www.306gti6.com/forum/showthread.php?id=160388
This is a more accurate representation of its current condition.

I have bought a new cambelt kit and i'm going to buy a water pump soon. it was last changed at 96K and its on 117K now, three years since the last change. so im going to get that done soonish.

do you reckon that this would do the job? i'd probably be reusing the Cams already in my engine and maybe buy new lifters??

i could get a video of the noise it makes if that would help?

Thanks,
Alex

Posted 4th May 2016 at 22:06

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline

Post #5

how much is just the labour rich (presuming my 16k mile guides arent damaged from bent valves) need a head prepared for my engine build, i do have 16 used straight valves

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 4th May 2016 at 22:20

Profile

rich_w

Seasoned Pro

Location: Havant, Hampshire

Registered: 29 Jul 2004

Posts: 5,412

Status: Offline

Post #6

Alex - you have PM Smile

________________________________________

Contact Details:

rich@lynxpowerengineering.co.uk
07732 822546

Posted 4th May 2016 at 23:19

Profile

rich_w

Seasoned Pro

Location: Havant, Hampshire

Registered: 29 Jul 2004

Posts: 5,412

Status: Offline

Post #7

Mei, I expect the labour would be around £250 for a full job - I'm doing this head cheap as I have the parts in stock, which I'm trying to clear.

If you want, I can send you the details for our engineering firm, and you could have them price up exactly what you want done. If all you want doing is the seats cutting and a skim, it could be cheaper, particularly if you can assemble the head yourself Smile

________________________________________

Contact Details:

rich@lynxpowerengineering.co.uk
07732 822546

Posted 4th May 2016 at 23:22

Profile

rich_w

Seasoned Pro

Location: Havant, Hampshire

Registered: 29 Jul 2004

Posts: 5,412

Status: Offline

Post #8

Sold

I do have others available to order, please PM me if this service is of interest.

________________________________________

Contact Details:

rich@lynxpowerengineering.co.uk
07732 822546

Posted 6th May 2016 at 11:14

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,838

Status: Offline

Post #9

Hi Rich, I can put it together myself not a problem, just at that frustrating point where I haven't any access to machines like that!

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 6th May 2016 at 11:57

Profile

All times are GMT. The time is now 02:14

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.