________________________________________
Team Running Engine again!Team Negative Camber!
My Budget track engine build thread!
Now appearing at a Trackday near you!!
|
displaying posts 26 to 31 of 31
Pages (2): 1 [2]
| Author | Subject: bp270 cams fitted tapping noise |
jeffers
Forum AdminLocation: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline |
Post #26
To be fair these don't generally suffer from sticky lifters....________________________________________ Team Running Engine again!Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!! |
|
|
|
cully
Seasoned Pro Location: Cullompton Registered: 12 Jun 2013 Posts: 1,093 Status: Offline |
Post #27
they will suffer if the oil is left for a period of timeoil drains and it can start next time with tapping a couple of heat cycles normaly sorts them same can happen if you change grade of oil i had one that rattled its tits on synthetic but was fine on semi |
|
|
|
tobias.gtr
Newbie Location: bristol Registered: 23 Jan 2016 Posts: 19 Status: Offline |
Post #28
i took the head off today and all the inlet valves were just touching the pistons and the head has been skimmed right down to the limit markers iv took all the valves out and all look straight but will be getting them checked ________________________________________ tobias |
|
|
|
cully
Seasoned Pro Location: Cullompton Registered: 12 Jun 2013 Posts: 1,093 Status: Offline |
Post #29
limit markers? if you mean the casting marks on the head face are gone, it has been skimmed passed its maximum 0.2mm |
|
|
|
tobias.gtr
Newbie Location: bristol Registered: 23 Jan 2016 Posts: 19 Status: Offline |
Post #30
you can just make them out ________________________________________ tobias |
|
|
|
adam b
Seasoned Pro Location: The Nam Registered: 24 Jan 2006 Posts: 12,829 Status: Offline |
Post #31
jeffers wrote: To be fair these don't generally suffer from sticky lifters.... They can do though, mine had four! ________________________________________ Nothing to see here |
|
|
|
Pages (2): 1 [2]
The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)