|
displaying posts 1 to 3 of 3
| Author | Subject: Headlight mount repair |
 dangti6
aka JKshooter  Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #1
Failed an MoT today, one of the failures being 'insecure headlights'. Admittedly they will move if you really wobble them because the bottom mounts are commonly broken. Nothing severe though IMO - but I'll have to figure something out for the retest.Before I go and fire some 2" wood screws to an L bracket on each, has anyone done this before with ingenious components I may have overlooked? ________________________________________  |
 Posted 18th May 2015 at 17:34
|
|
|
cully
Seasoned Pro  Location: Cullompton Registered: 12 Jun 2013 Posts: 1,093 Status: Offline |
Post #2
cable ties are favourite  |
|
Posted 18th May 2015 at 17:46
|
|
|
dangti6
aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #3
Just taken the grill off and the nearside headlight was missing the inner bolt - so just the top holding that in. Offside - inner mount section completely sheared off and missing  ________________________________________ |
|
Posted 18th May 2015 at 19:14
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.