Just found this in my garage, its a standard gti-6 engine loom thats been stripped back to the bare essentials for running the engine. Still got the standard ecu connector on it, and all you need to get it running is to connect a +12v, an ign 12v and an earth cable. It still has the output cables for the tacho, STOP light and 2x CAN cables so its ideal for a 205 gti6 conversion or track car etc and could be easily connected via can to a data logger or dash. You could also chop the original connector off and rewire it to a connector to suit an aftermarket ecu.

Looking for £50 delivered...

Sorry for the poor quality pic...

________________________________________

Oulton Park in a BTCC 306 vid 1
Oulton Park in a BTCC 306 vid 2
Lap of the 'ring