Author	Subject: Track rod end top nut size
dangti6 aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,308 Status: Offline	Post #1 I'm soon to be replacing a few suspension bits and bobs on the HDi, and in preparation I'm wanting to get a pair of new nyloc nuts for the track rod ends. Are they standard pitch? 16mm spanner size iirc. ________________________________________ Senior Test Automation Engineer for the 306GTi6 Owners Club Forum
Posted 31st Mar 2014 at 23:11 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline	Post #2 1.25. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 31st Mar 2014 at 23:13 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,866 Status: Offline	Post #3 4010 F5 STEERING GEAR NUT 10X1.25-18,25 ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 31st Mar 2014 at 23:15 Profile

dangti6 aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,308 Status: Offline	Post #4 Thanks WP. No idea why I didn't bloody check SB. I've done that a lot in past for finding out bolt specs but it didn't cross my mind this time ________________________________________ Senior Test Automation Engineer for the 306GTi6 Owners Club Forum
Posted 1st Apr 2014 at 08:10 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)