hi all

I have spare braided -12 oil pipe with fittings. designed to be used for a dry sump system to carry the oil from the tank in the boot to the pump fitted on the sump.

so there is one return and one supply line, both approx 10ft long so enough to mount your oil tank in the boot and reach the engine.

in good condition, in places the braided has fraid slightly but this will not affect the performance atall. Just be careful not to cut hands when fitting.

all female fittings, one pipe has a straight female -12 and a 180 degree -12 female and the other has a -12 straight female and a 90 degree -12 female as can be seen in the picture below



£70 delivered

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Bump.

Will go on eBay this evening

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

£55

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Got any brakes?

________________________________________

Chris
1999 China Gti6 Supercharged [Fun car] >>Project Thread<<
2000 Bianca 306 Diesel [Work runabout]

£50

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R