Only bad points are the backbox has a few very small dents in it (barely noticable in the pics) and the welding on one of the hangers is a bit tatty (pic included).
Looking for £140 collected from Plymouth (exhaust is one piece no joins).
|
displaying posts 1 to 10 of 10
Author | Subject: 3" Longlife Stainless Cat Back Exhaust for GTi6 |
lewisdmz
Senior User Location: plymouth Registered: 25 Jul 2009 Posts: 504 Status: Offline |
Post #1
Great condition, only been on the car ~15 months or just over 10k miles. Comes with a lifetime guarantee from Longlife. 3" inwardly rolled tip, 2" bore all the way through.Only bad points are the backbox has a few very small dents in it (barely noticable in the pics) and the welding on one of the hangers is a bit tatty (pic included). Looking for £140 collected from Plymouth (exhaust is one piece no joins). |
Posted 3rd Jun 2013 at 18:34
|
coskev
Seasoned Pro Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline |
Post #2
Looks good that How loud was it?very similar backbox to a Magnex ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........Mac1 ZR R1 kit car build in progress. |
Posted 3rd Jun 2013 at 20:30
|
lewisdmz
Senior User Location: plymouth Registered: 25 Jul 2009 Posts: 504 Status: Offline |
Post #3
Hmm, it was "mild sport" spec at Longlife which is one above standard I believe. Not going to lie it does drone a bit at motorway speeds but then what stainless exhaust doesn't?Good sound on it, little video here: https://www.youtube.com/watch?v=y4tCFQLeIWk |
Posted 3rd Jun 2013 at 22:14
|
TomGC
Junior User Location: Donington Registered: 10 Nov 2012 Posts: 93 Status: Offline |
Post #4
Provisional dibs please mate. Only thing being collection / delivery - would you be prepared to package it for a courier? If not, will it fit in a six without removal of trim? Ta |
Posted 4th Jun 2013 at 12:09
|
bigbadbowen
Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,753 Status: Offline |
Post #5
Hmmm that's not a standard cat fit ? Unless it clamps to the sleeve ? |
Posted 4th Jun 2013 at 13:06
|
lewisdmz
Senior User Location: plymouth Registered: 25 Jul 2009 Posts: 504 Status: Offline |
Post #6
TomGC wrote: Provisional dibs please mate. Only thing being collection / delivery - would you be prepared to package it for a courier? If not, will it fit in a six without removal of trim? Ta It will indeed fit in a 6, just need to put the rear seats down and the end will be just about where the handbrake is. I drove 3 hrs with it like that and a passenger without any issue. Either that or I can package it for a courier the best I can, I have bubble wrap and cardboard. |
Posted 4th Jun 2013 at 21:16
|
lewisdmz
Senior User Location: plymouth Registered: 25 Jul 2009 Posts: 504 Status: Offline |
Post #7
bigbadbowen wrote: Hmmm that's not a standard cat fit ? Unless it clamps to the sleeve ? It does exactly that, slides perfectly over the cat join. |
Posted 4th Jun 2013 at 21:18
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #8
it'll fit in a 205 with room to spare However when I sent one last week I just bubblewrapped and boxes the silencers and wrapped plastic around the tubes, courier was happy with it when he collected and no complaints from the buyer. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 4th Jun 2013 at 21:29
|
coskev
Seasoned Pro Location: Oswestry Registered: 01 Nov 2009 Posts: 3,132 Status: Offline |
Post #9
Paisley Freight will collect/deliver exhausts up to 2.5mtrs long for £20 Not worth the cost of fuel/time collecting yourself IMO ________________________________________ Red GTB1756 powered Fabia VRS daily driver,LBSC Gti6 eater........Mac1 ZR R1 kit car build in progress. |
Posted 5th Jun 2013 at 09:35
|
TomGC
Junior User Location: Donington Registered: 10 Nov 2012 Posts: 93 Status: Offline |
Post #10
Sounds good to me if you're OK to package, Lewis. PM incoming.Cheers everyone. |
Posted 5th Jun 2013 at 11:20
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.