Hi I'm breaking a 95K 2000 phase 3 China
Some parts are boxed ready to post but most parts are still on the car so will need some time to get down to the 6 and whip the bits off. The panels and bigger stuff would be a weekend job.

Location Strood Medway Kent ME2 / Biddenden Ashford kent TN27 Mon-Fri 8am-4pm

Posting wont be a problem for the smaller bits as I'm working close to post office so parts already boxed will be posted next day. Some of the larger bits will be collection only.

Clicking on bold highlighted writing will show pictures

Unavailable parts
Crank, rods, pistons, block.
Drivers wing mirror
Roof lining
Wishbones
Dash frame however all switches, blower, plastics, vents, etc are for sale.




Wheels, Brakes, Suspension, Drivetrain
Pro race 2 16" t1r's £200 Collected
light track wheels lighter that pro race 1.2 some paint flakeing around bolts no kurbing.
Two have 4.5mm - Other two are almost brand new condition.Includes wheel bolts.Direct fit no spacers, missing one spigot ring. 73mm bore to 65.1mm pug fit.

Pro race 2 Pic 1
Pro race 2 Pic 2
Pro race 2 Pic 3
Pro race 2 Pic 4
T1r's Tread Depth

Rear beam complete minus rear callipers £50 Collected
Rear Callipers £25
Brake callipers front new mintex pads and faily new brembo discs £50 Boxed
Bilstien B4 Struts, Springs & Topmounts £20 Collected
Front hubs 18mm £25
Front Hubs 16mm need new bearings £10
Drive shaft D/S £10
Drive shaft P/S £10
Gearbox £70 Collected
Flywheel £5

Exhaust
Exhaust manifold £30
Cat £20
Hoffman centre section almost brand new £10
Magnex 3" exhaust Back box £40
Magnex 3" exhaust Back box
Magnex 3" exhaust Back box
Has some scratches and two small dents came off a Magnex cat back. 76mm tip - sleeve ex 66mm - pipe ex 63mm

Engine Bay
Head Complete Non Tapper £100
Alloy crank pulley complete kit Rich W £80 Boxed
Auto tensioner pulley has brand new bearing, has a mark by the circlp slipped on the press, circlip fits fine. Idler pulley has brand new bearing, has a scratch on the side of pulley.
Auto tensioner with new pulley/Bearing £15 Boxed
The pulley is almost brand new came off a o.e pug auto tensioner. 1k mile on it.
Inlet manifold complete inc all sensors £50
Inlet manifold bare £10
Inlet manifold bare £10
Injectors & fuelrail £10 boxed
Could do with new o rings
Starter motor Valeo £15 Boxed
Alternator £10
Oil catch tank £20 Boxed
Coil packs N'4 £20 Boxed
Bitron Unit
Battery tray/Box £20
Battery tray/Box
Original Airbox without filter £20 Boxed
Original Airbox Boxed
Pipercross venom induction £20
In the process of cleaning this up will post some pics soon. this is the alloy version of the carbon fibre viper.
Locked ecu £40
Unlocked ecu Rich W £60 Boxed
Heat Exchanger £10
Matrix Pipes £15
Top Rad Hose £10
Lower Rad Hose push in type £5
Alloy rad £10 Collected
Fan setup £20
Abs pump £5
Brake servo £10
Power steering Pump £5

Interior
Gear knob £15
Gear knob
Steeringwheel £10
Speedo £10
Glovebox £10
Rear seats £15 Collected
Front Seat rails £10 each
Door cards £10 Collected
Front Light Console £5
Rear Light Console £2
Front belts £5
Rear belts £5

Exterior
Front bumper £40 Collected
Rear bumper £40 Collected
Bonnet £20 Collected
Wing D/S £10 each Collected
Drivers door inc glass £25 Collected
Passenger door inc glass £25 Collected
Boot hatch £40 Collected
Passenger wingmirror £10
Side Skirts £10 Collected
Front lights Crystal £10each - £15 pair
Front lights Crystal
Light are missing there lower fixing point as usual.
Front lights ph2 £5 each
Front lights ph2
Rear lights £10 each - £15 pair
Side repeaters new bulbs £5
Rear Wiper Arm £5
Front Wiper Arms £5
Hocky Sticks £5
Grill £5
Under Tray £40 Collected
Slam Panel £15 Collected
Front wiper motor £5
Rear wiper motor £15

Ok mate hopefully if its not p**sing down tomorrow ill be getting them off and cracking the nipple make sure there all good, all came of a perfectly healthy car so coils were fine Sagem ones o.e i assume

Alloy pulley complete kit. What does that consist of mate?

Ok mate, im interested. Will let you know if I'll have it tomorrow.
Need to check funds!

What condition is the rear bumper in? If it is reasonable I will have it!

________________________________________

Team China
Team Pirelli
Team Cracked Bumper
92k
20th Nov 1999 she was born

PM sent.

________________________________________

61k miles Ph.1 Diablo '6 Project Thread

PM replied to.

The alloy crank does fit but I dont think one of the otherd fit you have a different tensioner I can check my mate's rallye possibly tomorrow.

shouldn't title be 1999 instead of 2001 mate being a v reg

________________________________________

JAMMA "M44YHW" MAYHEW

LOSE WEIGHT NOW - ASK ME HOW -
NUTRI-FIX

GTi6 LPG, The best of both worlds!

2006: 1997 R reg 306 1.4 Miami - Diablo Red - DEAD
2007: 1999 V reg 306 1.4 Meridian - Diablo Red - SOLD
2007-09: 1998 S reg 306 GTi6 - Diablo Red - DEAD
2009-10: 1998 R reg Corsa 1.2 - Blue - SOLD
2010-13: 2001 Y reg 306 GTi6 LPG - Diablo Red - DEAD
2013 - 2013: 2000 X reg GTi6 LPG - Moonstone Blue - DEAD
2013 - current: 2001 X reg GTi6 LPG - Diablo Red
]FOR SALE[/b]

"I LIVE FOR THE 306"

PM Replied to!

________________________________________

Team China
Team Pirelli
Team Cracked Bumper
92k
20th Nov 1999 she was born

How much just for the panel filter without the box?

I'll also vouch for the head being a non tapper. It sounded sweet as a nut.

________________________________________

See the sheer power and might of the lesser known burrowing owl.

Nah, hes going to get a meg 225 I think. Do let me know though. Id be up for the k&n so I can get a rotation going with the one already in mine which needs a clean. Sad to see this one broken but it'll help out a lot of other 6's as it was a sound car.

________________________________________

See the sheer power and might of the lesser known burrowing owl.

Bottom end off that quiet little china will sort that out.
What was the original noise?

________________________________________

See the sheer power and might of the lesser known burrowing owl.