I'm now in the process of selling most of the 306 spares I have so this spare engine is up for grabs.

It has covered 105k and had piper 285 cams fitted at 81k in 2007 with receipts from Pug1off (total cost £1600!). When fitted the whole head was rebuilt having two inlet valves replaced along with water pump and cambelt.

The engine comes without an inlet manifold but does have the exhaust manifold. The flywheel and clutch are still attached as the clutch was replaced only 2k miles ago at a cost of £260! (Receipts from Mr Clutch). The engine was removed the car as I bought the car for parts that helped build my 205.

The engine is located in Leatherhead in Surrey (J9 M25). I'm looking for £375 Ono. Depending on interest I may split.

Matt

________________________________________

306 GTI-6
205 GTI-6 Project
205 1.6 GTI - RIP
205 1.9 TT - RIP
E39 535i - Daily driver
*Newest edition* E60 M5 5l v10 - The weekend car

i'll have the head and cams if price is right!

you said the 'whole' head was rebuilt, but only 2 valves were replaced? I'm guessing it had a freshen up

with new seals etc

any pics of cams, there will be numbers stamped into them

look right on the ends of the cams at the cam wheel ends....

________________________________________

306 less for first time in nearly 7 years. Lets keep it that way... please refuse any offers i make to buy your 306 ( doctors letter supplied by request)

Marmite and cheese sandwiches anyone???

Burns and Mcrae will be forever missed.
x box "yippeekayaymofo"

I may be interest in the whole lot