Updated [04/03/13]

Hello,

I am having a shed clear out and have almost a complete 306 GTi-6 engine which I am separating into parts. The car had 66k miles on the clock.

Here is a list of the key bits (probably more so please ask if you need something else). Let me know if you need any photos.
All prices are excluding delivery (if not wanting to collect I can arrange couriers). Collection from DL4 area.


Cam pulleys £10 (+ £6 P&P)
Rocker Covers (Pair) £15 (+ £6 P&P)
Ph1 engine wiring harness £20 (+ £6 P&P)
Flywheel £5
Pistons & Rods (4 off) £25 (+ £8 P&P)
Crankshaft £15
Alternator £10 (+ £8 P&P)
Rear Engine Water Pipe (metal) £6 (+ £4 P&P)
Block £20
Throttle body £10 (+ £6 P&P)
Injectors (4 off) £20 (+ £6 P&P)
Starter motor £10 (+ £6 P&P)
Air con pump £5
ABS pump/module £10
PAS Pump £15 (+ £6 P&P)
Oil Pump £10 (+ £6 P&P)
PAS lower pipe (under engine) £5 (+ £6 P&P)
Brake master cylinder (inc reservoir) £15 (+ £6 P&P)
Rear Engine Mount £5 (+ £6 P&P)

Inlet manifold (bare) £Sold - morgan205
Top Radiator Hose £Sold
Battery box (with lid) £Sold
Cams (pair) £sold
8 Inlet Valves with springs and tappets £Sold
8 Exhaust Valves with springs and tappets £Sold
Gear box £Sold
Oil Sump £Sold
Timing belt covers £Sold
Spark plug cover £Sold





Open to sensible offers...

Stuart

________________________________________

Peugeot 306 Gti-6 Track car (soon to be supercharged)
Project page
Blog

Hi,
Yes the bottom is still together (only removed the sump so far, but still have it)
The head is off and in parts.

________________________________________

Peugeot 306 Gti-6 Track car (soon to be supercharged)
Project page
Blog

Sorry, just had a quick look at the engine and I have removed more than I thought.
All the internals are still there (ie pistons, crankshaft, oil pump, oil sump). There is no auxiliary bracket (removed the non air con setup for my car). Here is a couple of photos to show you what is still together.



Is this still of any use? if not I will continue to dismantle

________________________________________

Peugeot 306 Gti-6 Track car (soon to be supercharged)
Project page
Blog

Lets say £75 (includes; engine block, pistons, rods, crankshaft, flywheel, sensors attached to the block, rear engine mount, oil sump, oil pump & water pump). Can refit other things listed above if required

Although I am not sure how this could be shipped, so would probably need collecting.

________________________________________

Peugeot 306 Gti-6 Track car (soon to be supercharged)
Project page
Blog

Cheers for the rad hose. See you at croft

________________________________________

The 205

205 GTI6 For Sale

Off Racing!

will gearbox fit phase 2 97 r reg

________________________________________

j green

Yes it will

Hello,
The gaskets are in good condition and do not leak.

Delivery + some packaging material will be £6
So £21 delivered

(You can also have the parcel delivered to certain local shops if you want - saves waiting in all day if that is a problem)

________________________________________

Peugeot 306 Gti-6 Track car (soon to be supercharged)
Project page
Blog

ok im new to this forum hw do i go bout payment etc

________________________________________

j green

is box in full wrkin order any pics?

________________________________________

j green

ok brilliant

________________________________________

j green

Here are some photos of the Gearbox.

________________________________________

Peugeot 306 Gti-6 Track car (soon to be supercharged)
Project page
Blog

thanks for pics mate will box fit phase 2 yea are theyvall same phase 123

________________________________________

j green