Found this pic on 1of Chris with a pug's threads maybe someone gave him the answer.
Thanks for any help
MarcMorley has attached the following image:
________________________________________
MORLEY
|
displaying posts 1 to 24 of 24
Author | Subject: White and brown connector |
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #1
Hi, don't suppose anyone knows what these are, been doing the heater matrix and got them left over.Found this pic on 1of Chris with a pug's threads maybe someone gave him the answer. Thanks for any help MarcMorley has attached the following image: ________________________________________ MORLEY |
Posted 14th Oct 2012 at 00:22
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #2
Anyone know its got me beet________________________________________ MORLEY |
Posted 14th Oct 2012 at 21:33
|
dangti6
aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #3
I'd be looking for a couple of sockets not fulfilled :________________________________________ |
Posted 14th Oct 2012 at 21:44
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #4
I have. I've also had the dash back out.________________________________________ MORLEY |
Posted 14th Oct 2012 at 22:02
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,794 Status: Offline |
Post #5
what is on the other end? any wire numbers near the plugs or anything?________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 14th Oct 2012 at 22:05
|
dangti6
aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #6
What doesn't work since?________________________________________ |
Posted 14th Oct 2012 at 22:12
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #7
Nothing that i can see, problem is I don't want to put it back just to have that eureka moment then aw f**k.________________________________________ MORLEY |
Posted 14th Oct 2012 at 22:40
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,794 Status: Offline |
Post #8
is it related to the alarm LED on the dash? ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 14th Oct 2012 at 22:41
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #9
No that's plugged in, they are the same type of connector tho.________________________________________ MORLEY |
Posted 14th Oct 2012 at 22:50
|
dangti6
aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #10
Have a good look around the heater box assembly.________________________________________ |
Posted 15th Oct 2012 at 16:05
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,794 Status: Offline |
Post #11
nothing to do with the square button on the steering column surround for the ultrasonics?________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 15th Oct 2012 at 16:06
|
dangti6
aka JKshooter Location: Taunton, Somerset Registered: 15 Jun 2006 Posts: 10,305 Status: Offline |
Post #12
Presumably the wires aren't 7 foot long. What area are they in? ________________________________________ |
Posted 15th Oct 2012 at 16:09
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,828 Status: Offline |
Post #13
fag lighter and ashtray light?________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 15th Oct 2012 at 16:58
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #14
It Defo not the fag lighter or tray light as these are plugged in, It Defo not the button for the ultrasonics as they are plugged in to. ________________________________________ MORLEY |
Posted 15th Oct 2012 at 18:55
|
stan_306gti6
Forum Admin Location: Kent Registered: 18 Jan 2004 Posts: 21,768 Status: Offline |
Post #15
Do you recall unplugging them in the first place?If not, it could well be that they are not used on our cars... ________________________________________ "Supercharged - 454.1bhp/317.5lb/ft"Peugeot 306 GTi-6 2000 (X), Moonstone |
Posted 17th Oct 2012 at 11:52
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #16
Have thought about that and just can't recall.I did however plug the red L.E.D into it and the blower came on, but this all works anyway, Think it maybe unused, as everything works. ________________________________________ MORLEY |
Posted 17th Oct 2012 at 22:24
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,828 Status: Offline |
Post #17
OOO! its AC right? the on/off switch and the recirc switches?________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 17th Oct 2012 at 22:42
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #18
Welshpug, where on the heater controls.________________________________________ MORLEY |
Posted 18th Oct 2012 at 15:03
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,828 Status: Offline |
Post #19
hmm, a thought but that lot may be on multiplugs? been so long since I have taken an a/c centre console apart.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
Posted 18th Oct 2012 at 15:06
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,794 Status: Offline |
Post #20
gone back through all my loom photos, can't see any like it, also checked chris' thread and can't see that photo even posted?!edit> http://www.306gti6.com/forum/showthread.php?id=98328 ah there we go. will have another think ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 18th Oct 2012 at 15:20
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,794 Status: Offline |
Post #21
they are located going to the bottom glovebox http://www.306gti6.com/forum/showthread.php?id=32068 ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 18th Oct 2012 at 15:30
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #22
I love you man, There are 4 prongs on my dash for the connectors, these are blanks. Thanks to all.________________________________________ MORLEY |
Posted 18th Oct 2012 at 16:40
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,794 Status: Offline |
Post #23
no problem. are you paying for my services by card or cheque? i charge 50p extra to cover costs of card processing________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
Posted 19th Oct 2012 at 12:17
|
MarcMorley
Newbie Location: carlisle Registered: 05 Jan 2012 Posts: 38 Status: Offline |
Post #24
One beer token to be paid to bearer________________________________________ MORLEY |
Posted 19th Oct 2012 at 15:26
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.