Post #14
Err well, I thought f**k it I'll get another rear view mirror in the first place as mine had gone all floppy on the ball thing!
I've put this one on the ball thing in my car for now and I've yet to do the wiring, it's still a bit floppy compared to what it should be like so I'm going to find another rain sensor mirror hanger bit.
Then instead of drilling the mirror case for the wiring as in the f&q I'm going to try drilling through the ball straight through the hanger into the base bit where the rain sensor cover will hide the wires, this is what the metal hanger and ball thing was like on the dim mirror I've got.
But first I will practice on my old hanger/ball thing and see if it compromises its integrity
I'll nip out in a mo and get a pic of what it looks like, the glass is the same
Size, the plastic surround but is a little thicker/wider than the standard one but it isn't too big, looks
About right, I think anyway, see how it grows, I've got to start using the thing first instead of just fitting shiny bits!
________________________________________
andrew315rawson@live.co.uk
Moonstone phase 7 gti6
My Project thread:
http://www.306gti6.com/forum/showthread.php?id=119992&page=1
buzzbrightyear
Posted 25th Jun 2012 at 17:43
