Removed from the car this afternoon as I have purchased a new pair with sliders fitted. They are 4mm thick polycarbonate and both sides have large pop-it vents fitted with are great for air flow. They are in used condition with a few marks and scratches here and there. Also have some over spray on the bottom of both but it doesn't not affect the windows when fitted.



Looking for £90 delivered for the pair

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

bump.... £70 delivered

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

bump... £50 delivered

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

Off the top of my head I seem to remember them being flat I will have a look tomorrow when I go to my Dads. I think they were from ACW if that makes any difference.

off topic: oil temp gauge was posted at lunchtime

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956

front windows are flat anyway and don't need to be thermoformed. these were part of the proper Plastics4Performance kit, and anything which required thermoforming was

(it's the rear window and the 2x quarter glass windows which need to be formed)

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]

Sold

________________________________________

306 2.1 S16 Tarmac Rally Car
Project thread: http://www.306gti6.com/forum/showthread.php?id=143956