pete_rallye
Post #1
I have 2 Gti-6 gearboxes with shorter final drives in. Both were bought to keep as spares for my btcc 306 but doesn't look like I'll ever be using them... I have not used either of them, one was bought from Chris Bowen aka Bigbadbowen on here, the other from a guy who used it in a rallying 306 but found it was too short for some stages so went back to a standard box. I'm going to have to check what the FD is on them, but 4.8 sounds right from memory.
[edited due to post below] The BBB one is a genuine PeugeotSport Boutique tarmac rally box with a machined shaft which incorporates a needle roller bearing on first gear. This improves the strength massively compared to the standard bearings, ideal for standing starts etc or when there is high load on the first gear bearing.
The other box as far as I am aware is a standard road car box with a shorter FD fitted.
BBB box I would like to see the £850 I paid for it back again.
Cheaper box now sold!
Both boxes are supplied with a standard diff only.
I can have these courier'd on a pallet for around £50 or collect from Harrogate, North Yorks.
________________________________________
Oulton Park in a BTCC 306 vid 1Oulton Park in a BTCC 306 vid 2
Lap of the 'ring
Posted 13th Jun 2012 at 21:05
