was wondering what the off-set is on the 1.9gti alloys

ive got a set of the smr's and cant find it printed on them anywhere.

Im running one as a spare just now on the back of the 6 and noticed it sits a fair bit burther into the arch.

also what size spacers are people using for these? i want them to sit as far out as possible giving about 5mm clearance from the inner lip of the outside arch. (hope that makes sense)

i will be running standard size 195 55 15 tyres

thanks

________________________________________

1997 blaze GTI-6 bought january '11 £800

Spend to date on parts £827.88

yup same et, 19mm.

smr's a bit heavier and slightly less caliper clearance but still fit with no issues

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Hmm. Cheers guys. Is it possible they have been machined down?? I can barely fit a finger down the back of the wheel between the inner arch and wheel. Where as the cyclone I can slide most of my hand in.

Could this be down to the beam?? Although when the cyclone is on I'm pretty sure they sat equally.

________________________________________

1997 blaze GTI-6 bought january '11 £800

Spend to date on parts £827.88