jorg
Post #1
I have the following induction bits to sell:
Forge Carbon Enclosed Airbox:
This was an ebay purchase which is now surplus to requirements. According to the seller at the time it is supposed to be for a VAG 1.8T engine. May be a few years old as I can't find anything about. I never got round to using it myself so I can't tell you how it goes with a GTi-6 engine. I figured at the time if its fine for 180bhp on a VAG engine it was worth a go.
Overall Height: 215mm
Body Height: 163mm
Body Diameter: 130mm
Inlet/Outlet Size: 76mm
Its not perfect, there is a scratch on the back. I have tried to my best to get a picture of it. and there are a few other blemishes here and there. 700mm of 76mm ID ducting in black will come with the airbox.
£50 delivered
Two Air Inlets:
These cam with the Viper kit I bought but are no use to me. They are red in colour and are for 76mm pipework. The overall diameter of the tops is 120mm.
£15 delivered for the pair
Samco Hoses:
Again these came with the Viper kit. One samco 90 degree elbow and one samco straight coupler around 75mm in length. Both in orange, 76mm diameter and brand new.
£30 delivered for the pair
I will accept £85 delivered for the above as a package deal. If you want anymore pictures or information just ask.
Geoff
________________________________________
306 2.1 S16 Tarmac Rally CarProject thread: http://www.306gti6.com/forum/showthread.php?id=143956
Posted 29th Apr 2012 at 14:16
