Post #1
Hi guys,Time has come for me to sell my Compomotive wheels, here's some details.
Compomotive MO6 (1672) white powder coated alloy wheels
Fitment is 16 x 7, ET 20, PCD 4 x 108.
Had these on my car for the last two summers, and were taken off, cleaned and kept indoors during the winter months.
The wheels are close to perfect and are very clean. One wheel has a small bit of kerbing a few inches long on the edge of the rim which I have touched up
All tyres are Toyo proxy T1-R in 195/45/16.
Fronts have 2-3mm of tread
Rears have 5mm of tread.
Wheels come with the original 16 tapered bolts.
A set of McGard locking wheel bolts and one removal key.
A complete genuine set of Compomotive spoke decals which I never bothered to use.
I will also include a pair of 3mm spacers if you feel the need to add them to the rear wheels.
All of this bolted straight on to my 6 which is lowered 30mm all round.
There was the slightest rubbing of the inner arch liner on the rear so I cut some away and it was fine, or you can use the 3mm spacers provided if you prefer
Here's the pictures...
And another angle for reference when new...
And fitted to car...
I am in no rush to sell these atm and wheels will be collection only for the time being.
Am looking for £600 ovno on these.
Thanks for looking guys,
- Mark
________________________________________
My Pugrun 2007/2009 video clipsTake a look
Pugrun 2007...Lose yourself
Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).
PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).
P1 Diablo red 6 gone but not forgotten