As some of you will no doubt know I've hit some hard times, to that end a Super unleaded munching car that doesn't encourage me to drive economically is a luxury I can't afford. Therefore, sadly it looks like the China needs a new home.

It's just had a full service inc. new Rotrex traction fluid and 6 litres of Royal £££ Purple racing oil, new SC belt, I replaced all the bearings in the SC belt tensioner and guide pulleys. Since then it has been fitted rith Rich_W roller wishbone bushes on genuine Pug wishbones, a set of rear discs and pads (during which time the rear calipers were overhauled and freed up) a 16 row Mocal cooler with a thermostatic (yes, a real one!) sandwich plate with braided hoses and aero fittings, the engine/chassis cup has also been repaired.

It's done very little mileage in my hands since I purchased it from mcfc1987 last year and the spec was covered very extensively in his sale thread at the time.

Bad points:

Some small scratches and usual parking dings plus a little laquer peel around the boot corners etc. The drivers seat base has lost all of its alcantara covering and needs either replacing or re-covering.

I'm not going to cover what I paid as that never happens but I'm not going to let it go for a song either, I have sunk nearly a grand into it since buying it and would like to see back 4.25K, no offers. (Edited due to silly offers)

Let the haggling, tyrekicking, test-piloting and general mugging of an honest seller commence...

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

i want my car back! trying to buy rich's old one from Pete though

________________________________________

Pro Race 1.2's wrapped in PZero Nero's
Solid rear mounts on a refurbed beam
Koni Shocks + Eibach Springs
Rich_W roller bearing bushes
Rich_W lightened flywheel
GE quick shift and a shortened Gear Stick
Megane R26 Brembo's on V6 discs
Longlife full system (currently de-catted)
KD strut brace
Aero Wipers
HID Lights
Low boost supercharged and all the gubbins that goes with it
Boost Gauge
Wideband Lambda and AFR Gauge
Rich W crank pulley
full 2.5" blueflame system with de cat

________________________________________

done. tried pming you but your mailbox is full. will you take my rallye part ex?

________________________________________

Sorry Dan, I'm ridding myself of Pugs full stop. I'm inheriting Mum's diesel Zafira company car for the forseeable future mate.

Oh, forgot to mention it's had a new heater matrix and a Sparco wheel fitted since I've had it too.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

I might be interested if I can get the loan and insurance sorted. But I don't have your number! so get in touch please.

Pretty sure it mentioned them, oh well.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

Please remove this advert my Australia fund is looking under threat andburning a hole in my pocket.I

________________________________________

306 less for first time in nearly 7 years. Lets keep it that way... please refuse any offers i make to buy your 306 ( doctors letter supplied by request)

Marmite and cheese sandwiches anyone???

Burns and Mcrae will be forever missed.
x box "yippeekayaymofo"

It's taxed to the end of December, MOT I'll have to check. It had a misfire which was cured by replacing the coil pack. Thats about it, I'd ditch the quickshift as its shite, apart from that its been good as gold.

________________________________________

R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.

Some of my services: (See my for sale threads)
Engine mount/chassis repair
Solid Beam Mounts BACK IN PRODUCTION
Harness bars

Definitely interested in this, can't bring myself to sell the Wallye so might have to break the bank here. What size are the wheels out of interest, can't find it anywhere.

________________________________________

'01 Astor Grey GTi6

'99 Cherry Rallye

take a cheap part ex?

Ok mate really nice car and spec so shouldn't take to long to re-home

i would be interested in

Rich_W roller bearing bushes
Rich_W lightened flywheel
Maybe supercharged engine depending on price

________________________________________

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =