I have forsale my 309 gti beam that I had fitted to my 205. I bought a second had beam and stripped it to find the crosstube, shafts and bearings were shot. The result being:

Less than three years ago I bought a brand new gen pug 309 cross tube. It cost a small fortune to say the least. When I was building it I also fitted brand new genuine partner 21.3mm torsion bars and one of Anthony's 24mm cut down and resplined gti6 arb's. The mounting brackets x4 where blasted and powder coated black. These have the odd patch of rust but nothing major! The trailing arm shafts were replaced with genuine pug shafts. The only parts of the beam that was not new or refurbed were the 309 gti trailing arms them selfs. The brake calipers were also refurbed items at the time. They come with gen pug handbrake cables fitted. I also have a new pair of discs and pads that someone kindly gave me that I will inc. The beam is also fitted with four stainless steel braided goodridge hoses from the 1.9 gti kit. I am in two minds if I should sell it or not, as an almost new 309 beam is going to be a hard thing to come by in the future. However for £500 I will let it go. If it does not sell I will be stripped and stored for future use

________________________________________

How to do a clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =