displaying posts 1 to 5 of 5

Author Subject: Stealth shelf, Alloys + Other parts
pugbug

Regular

Location: Leicester

Registered: 04 Dec 2008

Posts: 154

Status: Offline

Post #1
Acoustic Stealth Parcel Shelf W/ Component Speakers
Speakers are Vibe black air 6 360W, all wired up, tweeters are installed on the top side, sounds awesome, Didn't realise the weight of the shelf so cannot make it raise with the tailgate and don't want to butcher it. Shelf alone was £60.


£90 + £10 Postage

307 16" Ariane Alloys W/ 195/45/16 Tyres
Tyres are Nankang NS-2 for the front & Federal super steel's for the rear and have plenty of tread left. Wheels have been balanced and run true and straight, nowt wrong with them, just fancied a change






This is how they look on the car;


£190 - No postage, don't want to take the risk of damaging them in transit, will be happy to travel a few miles if deposit and fuel is covered
Or for £220 with hubcentric spacers, extended lockers + flat wheel bolts

Powerflow Stainless Steel Silencer
2" bore, comes with additional 2" piping to extend the joint & clamp.

£20 + £6 postage
Posted 24th Jan 2012 at 09:03
pugbug

Regular

Location: Leicester

Registered: 04 Dec 2008

Posts: 154

Status: Offline

Post #2
btt
Posted 27th Jan 2012 at 15:48
ct-hdi

Regular

Location: wakefield

Registered: 22 Apr 2009

Posts: 167

Status: Offline

Post #3
can u give me exact tread depths please mate?

properly measured though as ive bought wheels recently with 'all at least 5mm' which when u get them turns out to be 2 at 5mm and 2 at 3mm Smile

could collect asap Smile
Posted 28th Jan 2012 at 14:24
pugbug

Regular

Location: Leicester

Registered: 04 Dec 2008

Posts: 154

Status: Offline

Post #4
ct-hdi wrote:
can u give me exact tread depths please mate?

properly measured though as ive bought wheels recently with 'all at least 5mm' which when u get them turns out to be 2 at 5mm and 2 at 3mm Smile

could collect asap Smile


They are defo well over 5mm all round, I can't find my tread depth tool dammit.

Hope this pic will help illustrate the tread depth



I have the complete kit needed to put these on a 306, flat bolts, spacers, extended lockers too, I can do a good deal for the complete kit if you'd like
Posted 28th Jan 2012 at 18:36
ct-hdi

Regular

Location: wakefield

Registered: 22 Apr 2009

Posts: 167

Status: Offline

Post #5
pm me your good deal mate..

what they like with rubbing? read somewhere that with 20mm spacers they rub on the outer arch but without they rub on the inner arch on the rear?
Posted 28th Jan 2012 at 18:53

All times are GMT. The time is now 15:43

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.